☆ 4.6 Article

Energy Channelization Analysis of Rough Tools Developed by RM-MT-EDM Process during ECSM of Glass Substrates

MATERIALS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Multidisciplinary Sciences

Toward the Targeted Material Removal with Optimized Surface Finish During EDM for the Repair Applications in Dies and Molds

Kashif Ishfaq et al.

Summary: The application of Electric discharge machining (EDM) for repair purposes in the manufacturing industry has potential, but achieving controlled material removal rate and minimum surface roughness is still not well-explored. Additionally, the selection of the most suitable electrode material for controlled machining has not been explicitly discussed.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2023)

添加到收藏夹

Article Engineering, Manufacturing

On energy channelization analysis for ECSM process during fabrication of microchannels in glass

Tarlochan Singh et al.

Summary: In the ECSM process, the change in tool dimensions results in variation in energy channelization characteristics, with tool wear being the main cause of producing non-uniform machined features.

MATERIALS AND MANUFACTURING PROCESSES (2022)

添加到收藏夹

Article Automation & Control Systems

EDM of Ti6Al4V under nano-graphene mixed dielectric: a detailed roughness analysis

Kashif Ishfaq et al.

Summary: This study comprehensively investigates the potential of nano-graphene as a nano-powder additive for improving the roughness in electrical discharge machining (EDM) of Ti-alloy. Experimental findings reveal that using an aluminum electrode with graphene mixed dielectric produces the best surface quality, while the worst surface roughness is observed with a brass electrode. Additionally, it is found that a positive tool polarity results in lower roughness for all types of electrodes. By optimizing the settings, a reduction of 61.4% in the machined specimen's roughness compared to the average roughness value recorded during experimentation can be achieved.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Manufacturing

Impact of gas film thickness on the performance of RM-ECDM process during machining of glass

Tarlochan Singh et al.

Summary: This research describes an experimental study on the hydrogen gas film thickness during the RM-ECDM process, measuring the thickness using high-speed imaging technology and Matlab tools. By designing an experimental plan and utilizing the central composite design of response surface methodology, the study investigates the impact of gas film thickness on energy channelization behavior.

MATERIALS AND MANUFACTURING PROCESSES (2022)

添加到收藏夹

Article Engineering, Mechanical

Analyzing micromachining errors in EDM of Inconel 600 using various biodegradable dielectrics

Kashif Ishfaq et al.

Summary: The study evaluates the use of six different biodegradable dielectrics in electric discharge machining (EDM) of Inconel 600. Canola oil is found to be the most effective in reducing dimensional overcut, while the combination of sunflower oil and copper electrode also shows promising results. Compared to conventional kerosene oil, the biodegradable dielectrics can significantly reduce overcut.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2022)

添加到收藏夹

Review Engineering, Manufacturing

A review on microholes formation in glass-based substrates by electrochemical discharge drilling for MEMS applications

Tarlochan Singh et al.

Summary: Continuous demands for advanced radio-frequency transmission at higher frequencies have led to the use of glass-based materials in radio-frequency micro-electro-mechanical systems (MEMS) applications. The superior electrical insulation properties and optical transparency of glass make it an attractive choice, despite the challenges in micromachining. Electrochemical discharge drilling (ECDD) is a low-cost method with potential for fabricating micro-holes in glass substrates.

MACHINING SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Manufacturing

Investigating cryogenically treated electrodes' performance under modified dielectric(s) for EDM of Inconel(617)

Kashif Ishfaq et al.

Summary: Inconel 617 has unique characteristics that make it difficult to machine with conventional processes. Electric discharge cutting (EDM) is generally used for precise cutting, but it has a low machining rate. This study comprehensively examines the use of cryogenically treated electrodes and modified dielectrics to overcome this issue. Experimentation was performed using different types of electrodes and dielectric media, and Cu electrodes performed the best in terms of material removal rate (MRR). A blend of Span-20 and kerosene dielectric produced the highest MRR. Cryo-treated brass provided a significantly higher MRR compared to non-cryo-treated brass, and cryo-treated graphite tool produced the largest MRR when T-20 mixed kerosene was used. Span-20 added kerosene was the best choice for high MRR with non-cryo-treated electrodes, while Tween-20 mixed kerosene was best suited for cryo-treated electrodes.

MATERIALS AND MANUFACTURING PROCESSES (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Improvement in energy channelization behaviour during micro hole formation in Y-SZ ceramic with magnetic field assisted ECSM process

Tarlochan Singh et al.

Summary: In this study, the energy channelization behavior during machining of micro holes in Y-SZ under magneto hydrodynamic conditions was improved. The integration of magnetic field with ECSM process formed a stable gas film, which increased discharge frequency and discharge current. Evidence from various sources demonstrated the underlying process and material removal mechanisms. The magnetic field also aided in flushing out impurities from the machining region.

MEASUREMENT (2022)

添加到收藏夹

Article Chemistry, Physical

An Optimalization Study on the Surface Texture and Machining Parameters of 60CrMoV18-5 Steel by EDM

Panagiotis Karmiris-Obratanski et al.

Summary: EDM is a non-conventional machining technology that is widely used in modern industry, especially for machining difficult-to-cut materials. CALMAX, a chromium-molybdenum-vanadium tool steel, has exceptional properties but has limited research in EDM machining. This study presents a complete experimental study of CALMAX machining using EDM and applies multi-objective optimization techniques for analysis.

MATERIALS (2022)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication of micro holes in Yttria-stabilized zirconia (Y-SZ) by hybrid process of electrochemical discharge machining (ECDM)

Tarlochan Singh et al.

Summary: The integrated approach of electrolyte flow and pressurized feeding in electrochemical discharge machining (ECDM) process has shown to increase machining efficiency and improve hole depth while reducing diameter. The increased frequency of electrochemical discharges (ECD's) due to the supply of electrolyte allows controlled material removal without causing fracturing. Additionally, the supply of electrolyte decreases tool wear, leading to consistent machining conditions for longer durations.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Effect of tool electrode roughness on the geometric characteristics of through-holes formed by ECDM

Julfekar Arab et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Productivity improvement of micro EDM process by improvised tool

Ravinder Kumar et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Manufacturing

On performance evaluation of textured tools during micro-channeling with ECDM

Tarlochan Singh et al.

JOURNAL OF MANUFACTURING PROCESSES (2018)

添加到收藏夹

Article Engineering, Manufacturing

Analytical Simulation of Random Textures Generated in Electrical Discharge Texturing

S. Jithin et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)

添加到收藏夹

Review Engineering, Manufacturing

Developments in electrochemical discharge machining: A review on electrochemical discharge machining, process variants and their hybrid methods

Tarlochan Singh et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)

添加到收藏夹

Review Green & Sustainable Science & Technology

Recent advances in turning with textured cutting tools: A review

Varun Sharma et al.

JOURNAL OF CLEANER PRODUCTION (2016)

添加到收藏夹

Review Engineering, Manufacturing

Developments on electrochemical discharge machining: A review of experimental investigations on tool electrode process parameters

Pankaj Kumar Gupta et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2015)

添加到收藏夹

Article Engineering, Manufacturing

Experimental Investigation of ECDM for Fabricating Micro Structures of Quartz

Khac-Ha Nguyen et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2015)

添加到收藏夹

Review Green & Sustainable Science & Technology

Hybrid Manufacturing in Micro/Nano Scale: A Review

Won-Shik Chu et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2014)

添加到收藏夹

Article Engineering, Manufacturing

Machining Characteristics of Hybrid EDM with Ultrasonic Vibration and assisted Magnetic Force

Yan-Cherng Lin et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2014)

添加到收藏夹

Article Engineering, Manufacturing

Optimization of electric discharge machining process using the response surface methodology and genetic algorithm approach

Chorng-Jyh Tzeng et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2013)

添加到收藏夹

Article Engineering, Manufacturing

Effect of surface roughness of tool electrode materials in ECDM performance

Cheng-Kuang Yang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.