☆ 4.6 Article

Effect of Deformation Parameters of an Initial Aged GH4169 Superalloy on Its Microstructural Evolution during a New Two-Stage Annealing

MATERIALS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

An innovative annealing treatment method and its mechanism to refine deformed mixed grains of initial aged GH4169 superalloy

Ming-Song Chen et al.

Summary: In this study, an innovative annealing treatment method was proposed to refine the deformed mixed grains of the initial aged GH4169 superalloy. By combining aging treatment with continuous-cooling recrystallization annealing treatment (CC-RAT), both the nucleation rate and grain growth rate can be effectively controlled. The research results demonstrate that the microstructure can be fine and uniform by adjusting the heat treatment parameters, leading to improved performance of the alloy.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Chemistry, Physical

Tensile Test Coupled with an EBSD Study of a GH4169 Ring Rolled Product

Hao Wang et al.

Summary: This study investigates the plastic deformation behavior of the ring-rolled GH4169 alloy at the micro level through in situ tensile tests. The results show that the fraction of low-angle grain boundaries increases gradually during tensile deformation, and the misorientation evolution within the grain interior is severely inhomogeneous. Most of the slip system activation coincides with the Schmid law.

MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Recrystallization nucleation under close-set 8 phase in a nickel-based superalloy during annealing

Guanqiang Wang et al.

Summary: This research aims to clarify the connections between recrystallization and the delta (8) phase (Ni3Nb) during annealing in Ni-based alloys. The results show that the microstructure and component of the 8 phase dominate the recrystallization nucleation in the alloy.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Thermal Mechanisms of Grain Refinement in Steels: A Review

Zahra Nasiri et al.

Summary: This review discusses the thermal mechanisms of microstructural refinement in steels, focusing on processes like thermal cycling, martensite process, and static recrystallization (SRX). Recent advancements in grain refinement by thermal cycling and the application of the martensite process for low-carbon and DP steels are highlighted. The limitations and potential opportunities for grain refinement in steels using conventional and innovative processing routes are also presented.

METALS AND MATERIALS INTERNATIONAL (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Correspondence between low-energy twin boundary density and thermal-plastic deformation parameters in nickel-based superalloy

Guo-zheng Quan et al.

Summary: This study developed an improved twin density model to investigate the relationship between low-energy twin boundary density (BLD Sigma 3n) and grain size, stored energy in thermal-plastic deformation process and solved it for Nimonic 80A superalloy based on EBSD statistical results. The results showed that BLD Sigma 3n increases with increasing stored energy and decreasing grain size, and higher BLD Sigma 3n with finer grains corresponds with lower temperatures and higher strain rates.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2021)

添加到收藏夹

Article Chemistry, Physical

The Hardness Evolution of Cast and the High-Cycle Fatigue Life Change of Wrought Ni-Base Superalloys after Additional Heat Treatment

Juraj Belan et al.

Summary: Understanding the relationship between microstructure and mechanical properties is crucial for the production of high-stress components from Ni-base superalloys and optimizing the production process. The microstructure of Ni-base superalloys is closely related to the chemical composition, with various phases having both positive and negative effects on mechanical properties. The study aims to quantify structural parameters of different alloys and analyze the effect of heat treatment on phase morphology and volume fraction, as well as evaluate the impact on fatigue life.

MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Microstructure Evolution and Mechanical Properties of a Wire-Arc Additive Manufactured Austenitic Stainless Steel: Effect of Processing Parameter

Ping Long et al.

Summary: The study investigates the influence of linear energy input and cooling rate on the microstructure evolution, mechanical properties, and fracture mechanisms of steel deposited using cold metal transfer-based wire arc additive manufacturing system. The microstructures mainly consist of delta-ferrite and austenite dendrites, with sigma phase forming under low cooling rate conditions. The primary dendrite spacing decreases with lower linear energy input or higher cooling rate, affecting the mechanical properties of the steel. Mesoscopic damages are mainly caused by pore coalescence under low linear energy input, while dislocation piling up around delta-ferrite induces cracks under high linear energy input.

MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Methods and mechanisms for uniformly refining deformed mixed and coarse grains inside a solution-treated Ni-based superalloy by two-stage heat treatment

Guan-Qiang Wang et al.

Summary: The study investigated the uniform refinement mechanisms in a Ni-based superalloy during two-stage annealing treatment. By selecting suitable times for aging annealing treatment and recrystallization annealing treatment, a mixed microstructure with abnormal coarse recrystallization grains and fine grains can be achieved.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of initial mixed grain microstructure state of deformed Ni-based superalloy on its refinement behavior during two-stage annealing treatment

Guan-Qiang Wang et al.

Summary: The initial mixed grain microstructure state of deformed Ni-based superalloy significantly affects its refinement behavior during two-stage annealing treatment, mainly determined by deformation energy and dynamic recrystallization (DRX) degree. Higher deformation energy leads to faster recrystallization rate and finer final annealed grains. The competition between static recrystallization (SRX) nucleation and breakage of delta phase also plays a role in affecting the dissolution of delta phase during annealing treatment.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

The superplasticity improvement of Inconel 718 through grain refinement by large reduction cold rolling and two-stage annealing

Xu Yang et al.

Summary: Cold rolling with 84% reduction, followed by two-stage annealing, was effective in refining and homogenizing the grains of Inconel 718, leading to improved superplasticity. The introduction of crystal defects and storage energy during plastic deformation contributed to a dense and fine distribution of delta phase, enhancing the driving force for static recrystallization.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Chemistry, Physical

Effects of Double-Stage Annealing Parameters on Tensile Mechanical Properties of Initial Aging Deformed GH4169 Superalloy

Guanqiang Wang et al.

Summary: This study investigates the optimization double-stage annealing parameters for improving the mechanical properties of hot-upsetting GH4169 superalloy samples. Results show that the double-stage annealing treatment can improve the strength of the alloy, with a fracture mode consisting of a mixture of shear fracture and quasi-cleavage fracture. The improvement of strength by the double-stage annealing treatment is greater than the single-stage annealing treatment.

MATERIALS (2021)

添加到收藏夹

Article Engineering, Manufacturing

Effect of process parameters on microscopic uniformity of cross wedge rolling of GH4169 alloy shaft

Yingxiang Xia et al.

Summary: Micro-uniformity is an effective approach to enhance the quality of GH4169 alloy shaft, where a finite element model was established using DEFORM-3D. Through orthogonal experimental design, the impact of process parameters on microscopic uniformity during cross wedge rolling of GH4169 alloy shaft was analyzed. Experimental results validated the accuracy of the simulation, providing theoretical guidance for optimal process parameters in production.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the early stages of precipitation during direct ageing of Alloy 718

F. Theska et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of cold rolling deformation mechanisms on the grain refinement of Fe-15Mn-10Cr-8Ni-4Si austenitic alloy

Ilya Nikulin et al.

MATERIALS CHARACTERIZATION (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Grain refinement process in a cold-rolled polycrystalline cobalt

Xinglong An et al.

MATERIALS CHARACTERIZATION (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

δ-phase precipitation regularity of cold-rolled fine-grained GH4169 alloy plate and its effect on mechanical properties

Hao Xue et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2020)

添加到收藏夹

Article Engineering, Mechanical

The dislocation behaviour and GND development in a nickel based superalloy during creep

Soran Birosca et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of grain size on the small fatigue crack initiation and propagation behaviors of a nickel-based superalloy at 650 °C

Xumin Zhu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Manufacturing

High-temperature deformation mechanisms and physical-based constitutive modeling of ultra-supercritical rotor steel

Fei Chen et al.

JOURNAL OF MANUFACTURING PROCESSES (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural evolution and grain refinement mechanisms of a Ni-based superalloy during a two-stage annealing treatment

Ming-Song Chen et al.

MATERIALS CHARACTERIZATION (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Precipitation and dissolution behaviors of δ phase inside a deformed nickel-based superalloy during annealing treatment

Ming-Song Chen et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2019)

添加到收藏夹

Article Chemistry, Physical

Micro-mechanisms and precipitation kinetics of delta (δ) phase in Inconel 718 superalloy during aging

Mohsen Rafiei et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effects of Grain Size on Mechanical Properties and Work-Hardening Behavior of AISI 304 Austenitic Stainless Steel

Meysam Naghizadeh et al.

STEEL RESEARCH INTERNATIONAL (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Modeling of dynamic recrystallization volume fraction evolution for AlCu4SiMg alloy and its application in FEM

Guo-zheng Quan et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of strain rate on subsolvus dynamic and post-dynamic recrystallization kinetics of Inconel 718

A. Nicolay et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Annealing Treatment Methods and Mechanisms for Refining Mixed and Coarse Grains in a Solution Treatment Nickel-Based Superalloy

Ming-Song Chen et al.

ADVANCED ENGINEERING MATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure, precipitates and mechanical properties of powder bed fused inconel 718 before and after heat treatment

Le Zhou et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of annealing parameters on microstructural evolution of a typical nickel-based superalloy during annealing treatment

Ming-Song Chen et al.

MATERIALS CHARACTERIZATION (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

The δ phase precipitation during processing and the influence on grain boundary character distribution and mechanical properties of superalloy 718

Melanea Almeida Ramalho Medeiros et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigation on strain dependence of metadynamic recrystallization behaviors of GH4169 superalloy

Xiao-Min Chen et al.

VACUUM (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dissolution mechanisms and kinetics of δ phase in an aged Ni-based superalloy in hot deformation process

Dao-Guang He et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Chemistry, Physical

Effect of hot deformation on γ and δ phase precipitation of Inconel 718 alloy during deformation&isothermal treatment

Hongjun Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Delta precipitation in wrought Inconel 718 alloy; the role of dynamic recrystallization

Hongjun Zhang et al.

MATERIALS CHARACTERIZATION (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Influence of processing parameters on dynamic recrystallization and the associated annealing twin boundary evolution in a nickel base superalloy

S. K. Pradhan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mesoscale modeling and simulation of microstructure evolution during dynamic recrystallization of a Ni-based superalloy

Fei Chen et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

A new method to establish dynamic recrystallization kinetics model of a typical solution-treated Ni-based superalloy

Ming-Song Chen et al.

COMPUTATIONAL MATERIALS SCIENCE (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

New constitutive model for high-temperature deformation behavior of inconel 718 superalloy

Y. C. Lin et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural characterization, formation mechanism and fracture behavior of the needle 6 phase in Fe-Ni-Cr type superalloys with high Nb content

Yongquan Ning et al.

MATERIALS CHARACTERIZATION (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of initial aging time on processing map and microstructures of a nickel-based superalloy

Dong-Xu Wen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Constitutive models for high-temperature flow behaviors of a Ni-based superalloy

Y. C. Lin et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Hot deformation behavior and processing map of a typical Ni-based superalloy

Dong-Xu Wen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of different processing technologies and heat treatments on the microstructure and creep behavior of GH4169 superalloy

H. Y. Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure evolution of delta-processed IN718 during holding period after hot deformation

M. Cheng et al.

JOURNAL OF MATERIALS SCIENCE (2012)

添加到收藏夹

Review Materials Science, Multidisciplinary

A critical review of experimental results and constitutive descriptions for metals and alloys in hot working

Y. C. Lin et al.

MATERIALS & DESIGN (2011)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of hot working and post-deformation heat treatment on microstructure and tensile properties of Ti-6Al-4V alloy

S. M. Abbasi et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Deformation characteristics of delta phase in the delta-processed Inconel 718 alloy

H. Y. Zhang et al.

MATERIALS CHARACTERIZATION (2010)

添加到收藏夹

Article Chemistry, Physical

Hot working characteristics and dynamic recrystallization of delta-processed superalloy 718

Y. Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

添加到收藏夹

Article Nanoscience & Nanotechnology

Particle stimulated nucleation during dynamic recrystallization using a cellular automata model

RL Goetz

SCRIPTA MATERIALIA (2005)

添加到收藏夹

Article Nanoscience & Nanotechnology

Particle stimulated nucleation of recrystallization at silica particles in nickel

FJ Humphreys

SCRIPTA MATERIALIA (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.