☆ 4.8 Article

Designing Cathodes and Cathode Active Materials for Solid-State Batteries

ADVANCED ENERGY MATERIALS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Electrochemistry

Influence of Lithium Ion Kinetics, Particle Morphology and Voids on the Electrochemical Performance of Composite Cathodes for All-Solid-State Batteries

Anja Bielefeld et al.

Summary: In this study, electrochemical simulation using the finite element method is employed to investigate the influence of microstructural characteristics on composite cathodes. The research focuses on the particle size distribution of the active material, state-of-charge dependent input parameters, and the presence of voids in the electrode.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Recent developments in materials design for all-solid-state Li-S batteries

Nguyen Huu Huy Phuc et al.

Summary: All-solid-state Li-S batteries offer advantages over Li-S batteries with organic liquid electrolytes, mainly due to termination of the shuttle effect and improvements in active materials and lithium ion conductors. All-solid-state batteries using sulfidic materials have more advantages, especially batteries containing only one material as both the active material and ionic conductor.

CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2022)

添加到收藏夹

Review Chemistry, Physical

Single versus poly-crystalline layered oxide cathode materials for solid-state battery applications-a short review article

Seyedhosein Payandeh et al.

Summary: This mini-review discusses the recent advancements in the application of single-crystalline cathode materials in solid-state batteries. The characteristics of single-crystalline and poly-crystalline cathode materials are explored, with a focus on their kinetic and mechanical properties. The critical factors influencing their performance in different battery systems are investigated.

CURRENT OPINION IN ELECTROCHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Practically Accessible All-Solid-State Batteries Enabled by Organosulfide Cathodes and Sulfide Electrolytes

Weixiao Ji et al.

Summary: The combination of organic electrode materials and sulfide electrolytes shows promise in developing high-energy density, safe, and sustainable all-solid-state organic batteries. This study reports the use of thiuram hexasulfide as a low-cost and high-capacity cathode material for solid-state organic batteries based on sulfide electrolytes. The electrochemical characteristics and performance of this material are investigated, showing a high capacity retention and promising energy density.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Advanced Nanoparticle Coatings for Stabilizing Layered Ni-Rich Oxide Cathodes in Solid-State Batteries

Yuan Ma et al.

Summary: By using preformed nanoparticles synthesized via solvothermal method, a uniform surface layer with unique structure can be formed on layered Ni-rich oxide cathode active material, which contributes to enhanced performance of solid-state batteries.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Transport and mechanical aspects of all-solid-state lithium batteries

Grayson Deysher et al.

Summary: All-solid-state batteries (ASSBs) are considered highly promising due to improved safety and wider operating temperature range compared to liquid electrolyte-based counterparts. However, challenges remain in fabricating high-capacity and high-cycling-rate ASSBs. A quantitative understanding of ionic and electronic transport limitations in cathode composites, as well as mechanical aspects related to volume changes in Li metal anodes, is crucial for overcoming these challenges.

MATERIALS TODAY PHYSICS (2022)

添加到收藏夹

Article Engineering, Environmental

Tailoring shape and exposed crystal facet of single-crystal layered-oxide cathode particles for all-solid-state batteries

Hoyeol Jeon et al.

Summary: The shape and exposed crystal facet of cathode particles have important effects on the electrochemical performance of all-solid-state batteries, with specific shapes of cathode particles potentially enhancing the rate capability of the battery.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Multiscale understanding of high-energy cathodes in solid-state batteries: from atomic scale to macroscopic scale

Shuo Sun et al.

Summary: This review outlines the challenges and basic knowledge of composite cathodes in solid-state batteries, covering multiple scales from atomic to macroscopic levels. It focuses on interfacial structure, charge transport, and mechanical degradation. Emerging strategies and advanced characterization techniques are summarized, and future perspectives for composite cathodes are discussed.

MATERIALS FUTURES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

The interplay between (electro)chemical and (chemo)mechanical effects in the cycling performance of thiophosphate-based solid-state batteries

Jun Hao Teo et al.

Summary: This study investigates the problems in the cycling performance of solid-state batteries (SSBs) and emphasizes the importance of considering the interplay between superionic solid electrolytes (SEs) and cathode materials. The use of a SE with a low Young's modulus is found to achieve robust and stable interfaces, mitigating the mechanical degradation caused by volume changes in the layered cathode materials.

MATERIALS FUTURES (2022)

添加到收藏夹

Review Chemistry, Physical

Anode-Free Full Cells: A Pathway to High-Energy Density Lithium-Metal Batteries

Sanjay Nanda et al.

Summary: The anode-free full cell configuration is ideal for high energy density and lithium storage, but poor efficiencies of lithium plating and stripping lead to short cycle life. Recent studies have shown that advanced electrolytes and other methods can stabilize lithium deposition and improve cycle life.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Review Mechanics

Modeling the chemo-mechanical behavior of all-solid-state batteries: a review.

Donald Bistri et al.

Summary: Solid-state batteries are considered a promising technology for next-generation batteries due to their superior properties, but commercialization depends on resolving critical chemical and mechanical stability issues. Accurate modeling of these systems is crucial for material selection and operational parameters. Key challenges in solid-state batteries include dendrite growth, interphase formation, and phase damage, leading to capacity fade and safety concerns.

MECCANICA (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Reaction of Li1.3Al0.3Ti1.7(PO4)3 and LiNi0.6Co0.2Mn0.2O2 in Co-Sintered Composite Cathodes for Solid-State Batteries

Jean Philippe Beaupain et al.

Summary: The study investigates the reaction between the solid electrolyte Li1.3Al0.3Ti1.7(PO4)(3) (LATP) and the active material LiNi0.6Co0.2Mn0.2O2 (NCM622) in all-ceramic oxide batteries through cosintering, which reveals that elemental diffusion and decomposition reactions occur even at low sintering temperatures, hindering the densification of the composite and the formation of ion-conducting paths between individual particles. Based on the experimental results, a mechanism of the reactions in cosintered LATP and NCM622 oxide composite cathodes is suggested.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Physical

Interfacial challenges for all-solid-state batteries based on sulfide solid electrolytes

Shuo Wang et al.

Summary: Sulfide solid electrolytes have the highest room-temperature ionic conductivity among solid Li-ion conductors, making them attractive for high energy-density and safe all-solid-state batteries. However, interfacial issues between sulfide electrolytes and electrodes, such as instability and side reactions, pose challenges for their application in ASSBs.

JOURNAL OF MATERIOMICS (2021)

添加到收藏夹

Article Chemistry, Physical

Revisiting metal fluorides as lithium-ion battery cathodes

Xiao Hua et al.

Summary: Metal fluorides, traditionally classified as conversion materials, are instead characterized by diffusion-controlled displacement mechanisms during lithiation. A clear topological relationship between metal fluoride sublattices and LiF has been established, providing insights for the development of a wider range of isomorphic metal fluorides in lithium-ion battery cathode materials.

NATURE MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Electrochemo-Mechanical Effects on Structural Integrity of Ni-Rich Cathodes with Different Microstructures in All Solid-State Batteries

Xiangsi Liu et al.

Summary: This study systematically compares the electrochemical performance and electrochemo-mechanical behavior of different types of NCM811 in ASSBs. The results demonstrate the crucial role of structural integrity in the performance and stability of electrode materials, with S-NCM811 exhibiting exceptional performance.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Linking Solid Electrolyte Degradation to Charge Carrier Transport in the Thiophosphate-Based Composite Cathode toward Solid-State Lithium-Sulfur Batteries

Saneyuki Ohno et al.

Summary: This study investigates the enhancement of solid-state lithium-sulfur batteries, demonstrating improved capacity retention with high areal capacity after 100 cycles at room temperature. The research findings are applicable to any solid-state composite with electrically insulating active materials.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

The Working Principle of a Li2CO3/LiNbO3 Coating on NCM for Thiophosphate-Based All-Solid-State Batteries

Felix Walther et al.

Summary: This study improves the performance of all-solid-state batteries (ASSBs) by using a Li2CO3/LiNbO3 coating, which suppresses the interfacial reaction between the cathode active material and solid electrolyte, leading to a significant enhancement in battery performance.

CHEMISTRY OF MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

On the Additive Microstructure in Composite Cathodes and Alumina-Coated Carbon Microwires for Improved All-Solid-State Batteries

Simon Randau et al.

Summary: The study investigates the influence of different morphologies and surface areas of carbon additives on the performance of all-solid-state batteries, revealing that fiber-shaped vapor-grown carbon additives can enhance cathode active material utilization, while particle-shaped carbons have minor effects. However, carbon additives generally lead to accelerated capacity loss and increased formation of solid electrolyte decomposition products. A protection concept involving alumina coating on carbon fibers is developed to minimize electrolyte degradation and enhance overall battery performance.

CHEMISTRY OF MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Electrolyte melt infiltration for scalable manufacturing of inorganic all-solid-state lithium-ion batteries

Yiran Xiao et al.

Summary: The disruptive manufacturing technology reported in this study offers reduced manufacturing costs and improved volumetric energy density in all solid cells by using solid-state electrolytes with low melting points. The promising performance characteristics of such cells present new opportunities for the accelerated adoption of ASSLBs for safer electric transportation.

NATURE MATERIALS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Effect of surface carbonates on the cyclability of LiNbO3-coated NCM622 in all-solid-state batteries with lithium thiophosphate electrolytes

A-Young Kim et al.

Summary: The study found that incorporating carbonates into the surface coating can improve the efficiency of pellet-stack solid-state battery cells, with cycling performance strongly dependent on the solid electrolyte used.

SCIENTIFIC REPORTS (2021)

添加到收藏夹

Article Chemistry, Physical

Room-Temperature All-Solid-State Lithium-Organic Batteries Based on Sulfide Electrolytes and Organodisulfide Cathodes

Zihao Yang et al.

Summary: The authors report the first organodisulfide cathode, poly(trithiocyanuric acid) (PTTCA), for all-solid-state Li batteries, which demonstrates superior electrochemical performance compared to previous attempts. This work provides new orientation and insights for the further development of both all-solid-state Li batteries and organic electrode materials.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Energy & Fuels

Reactive boride infusion stabilizes Ni-rich cathodes for lithium-ion batteries

Moonsu Yoon et al.

Summary: The use of engineered polycrystalline electrodes in lithium-ion batteries is crucial for cycling stability and safety, but achieving high-quality coatings at both the primary and secondary particle levels can be challenging. A coating-and-infusion approach using cobalt boride metallic glass on a Ni-rich layered cathode has been shown to significantly enhance performance, including rate capability and cycling stability under various conditions. The success of this approach is attributed to the simultaneous suppression of microstructural degradation and side reactions, as well as the critical role of strong selective interfacial bonding in ensuring uniform reactive wetting and facilitating infusion.

NATURE ENERGY (2021)

添加到收藏夹

Article Chemistry, Physical

Insight into cathode surface to boost the performance of solid-state batteries

Sixu Deng et al.

Summary: Through X-ray characterization and electrochemical analysis, it was found that residual lithium compounds on the surface of Ni-rich LiNi0.8Mn0.1Co0.1O2 (NMC811) are the main reason triggering the oxidation of sulfide solid-state electrolytes (SSEs), inducing severe side-reactions at the cathode interface and structural degradation of NMC811. Cleaning the cathode surface can significantly suppress the degradation of the cathode interface, thereby improving the performance of the battery.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Review Chemistry, Physical

Research progress and application prospect of solid-state electrolytes in commercial lithium-ion power batteries

Jing Chen et al.

Summary: This review primarily focuses on the safety and practicality of solid-state lithium ion batteries, exploring various electrolytes and production methods to meet industrial demands and improve battery performance.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Synthesis and Postprocessing of Single-Crystalline LiNi0.8Co0.15Al0.05O2 for Solid-State Lithium-Ion Batteries with High Capacity and Long Cycling Stability

Roberto Fantin et al.

Summary: The application of nickel-rich NCA cathode materials in solid-state lithium-ion batteries shows promise for improving energy density, stability, and safety compared to traditional liquid electrolyte batteries. Utilizing single-crystalline cathode active materials and appropriate postprocessing techniques can lead to high-performance cathodes for SSBs, with improved capacity retention and rate performance.

CHEMISTRY OF MATERIALS (2021)

添加到收藏夹

Article Electrochemistry

Editors' Choice-Quantifying the Impact of Charge Transport Bottlenecks in Composite Cathodes of All-Solid-State Batteries

Philip Minnmann et al.

Summary: This study analyzed the charge transport in composite cathodes composed of Li6PS5Cl and NCM-622, revealing correlations between effective conductivities, microstructure, and cell performance. Strategies for optimizing cell performance were developed and demonstrated through adjusting active material loadings and solid electrolyte particle size to tune electronic and ionic charge transport pathways.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

添加到收藏夹

Article Electrochemistry

Synthesis of Co-Free Ni-Rich Single Crystal Positive Electrode Materials for Lithium Ion Batteries: Part II. One-Step Lithiation Method of Mg-Doped LiNiO2

Aaron Liu et al.

Summary: This study investigates the synthesis of Co-free single crystalline Mg-doped LNO via a one-step lithiation method, with results indicating that increasing the Li/TM ratio at lower temperatures does not affect grain growth but impacts the formation of Li2O impurity. While single crystalline materials still lag behind polycrystalline materials in cycling performance, controlling the Ni content can result in larger grains in the material.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

添加到收藏夹

Article Chemistry, Physical

Self-Stabilized LiNi0.8Mn0.1Co0.1O2 in thiophosphate-based all-solid-state batteries through extra LiOH

Yubin Zhang et al.

Summary: NMC 811 as a potential cathode material for next generation high-energy all-solid-state lithium batteries faces compatibility issues with thiophosphate-based electrolytes. Researchers have developed a LiOH-based surface stabilization strategy to address this issue, providing optimized cycling stability and capacity for the battery. This coating method is simple and cost-effective, offering a promising solution for improving the performance of NMC 811 in solid-state electrolytes.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

In Search of the Best Solid Electrolyte-Layered Oxide Pairing for Assembling Practical All-Solid-State Batteries

Tuncay Koc et al.

Summary: The study focused on the compatibility between solid electrolytes and cathode active materials in all-solid-state batteries, finding that Li6PS5Cl prepared by dry routes performed the best. However, electrolytes prepared by solution chemistry showed mixed results in terms of battery performance improvement. The research also revealed strong dependence on carbon additives and chemical/electrochemical incompatibility between Li3InCl6 and Li6PS5Cl/beta-Li3PS4.

ACS APPLIED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Polycrystalline and Single Crystalline NCM Cathode Materials-Quantifying Particle Cracking, Active Surface Area, and Lithium Diffusion

Enrico Trevisanello et al.

Summary: The NCM family of cathode active materials with high nickel content is becoming the preferred choice for high performance lithium-ion batteries. Study shows that cracking of polycrystalline particles of NCM is not only detrimental, but also helps achieve higher reversible capacities and rate capability. Optimization of CAM size and morphology is crucial for achieving good rate capability with high-nickel NCMs.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Single- or Poly-Crystalline Ni-Rich Layered Cathode, Sulfide or Halide Solid Electrolyte: Which Will be the Winners for All-Solid-State Batteries?

Yoonjae Han et al.

Summary: The use of single-crystalline NCA and oxidation-tolerable Li3YCl6 in all-solid-state batteries shows promising results in terms of discharge capacity, initial Coulombic efficiency, cycling performance, and rate capability. The overlooked contribution of side reactions to the degradation of polycrystalline NCA is revealed for the first time in this study through rigorous characterization and analysis.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

A perspective on single-crystal layered oxide cathodes for lithium-ion batteries

Jayse Langdon et al.

Summary: The increasing demand for lithium-ion batteries calls for higher energy density and longer cycle life. Single-crystal cathode particles have attracted intense interest due to their remarkable cyclability, but there has been no systematic analysis of the different techniques in this field thus far.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Understanding implications of cathode architecture on energy density of solid-state batteries

Marm B. Dixit et al.

Summary: Next generation solid-state batteries require optimization of composite cathode architecture to achieve high-energy density and high-performance goals. This study presents a framework for geometric modeling of composite cathode architectures and evaluates the impact on cell-level energy density.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

High Energy Density Single-Crystal NMC/Li6PS5Cl Cathodes for All-Solid-State Lithium-Metal Batteries

Christopher Doerrer et al.

Summary: A composite cathode consisting of single-crystal particulate LiNi0.83Mn0.06Co0.11O2 and Li6PS5Cl SSE showed outstanding discharge capacity at 30 degrees C, with a minimal volume change during cycling. This composite cathode achieved high performance with a first cycle coulombic efficiency of >85% and a near-practical discharge capacity at a high areal capacity using low cycling pressure.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Physical

Stabilizing the Cathode/Electrolyte Interface Using a Dry-Processed Lithium Titanate Coating for All-Solid-State Batteries

Rajendra S. Negi et al.

Summary: In this study, a dry-coating process using fumed lithium titanate (LTO) powder-based coating on Ni-rich oxide-based cathode active material (CAM) was applied to thiophosphate-based all-solid-state batteries (ASSBs) for the first time, resulting in significantly improved C-rate performance and long-term cycling stability. The enhanced electrochemical performance is attributed to reduced interfacial resistance between the coated cathode and solid electrolyte, as confirmed by in-depth electrochemical impedance spectroscopy analysis.

CHEMISTRY OF MATERIALS (2021)

添加到收藏夹

Article Electrochemistry

Editors' Choice-Quantification of the Impact of Chemo-Mechanical Degradation on the Performance and Cycling Stability of NCM-Based Cathodes in Solid-State Li-Ion Batteries

Gioele Conforto et al.

Summary: The use of solid electrolytes in lithium batteries shows promise for increasing power and energy density. However, challenges such as capacity-fading remain, with chemical, electrochemical, and chemo-mechanical effects being identified as causes. A model was proposed to interpret low-frequency impedance of the cathode, and an electrochemical technique was developed to determine the active mass in the cathode. The study demonstrated that chemo-mechanical evolution in the composite cathode is the main cause for cell capacity fading.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Operando optical tracking of single-particle ion dynamics in batteries

Alice J. Merryweather et al.

Summary: The key to advancing lithium-ion battery technology, especially fast charging, lies in understanding dynamic processes in functioning materials under realistic conditions in real time. A laboratory-based optical interferometric scattering microscope was introduced to study nanoscopic lithium-ion dynamics in battery materials, allowing for high-throughput material screening. This methodology was applied to study various processes in battery materials, providing insights into battery degradation mechanisms.

NATURE (2021)

添加到收藏夹

Article Chemistry, Physical

Lithium Argyrodite as Solid Electrolyte and Cathode Precursor for Solid-State Batteries with Long Cycle Life

Shuo Wang et al.

Summary: This study reports the in-situ formation of active materials in all-solid-state batteries through electrochemical decomposition, improving the performance of solid-state batteries. Comprehensive characterization, including operando pressure monitoring, reveals a co-redox process of two redox-active elements during cycling.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Review Chemistry, Physical

Fast Charging of Lithium-Ion Batteries: A Review of Materials Aspects

Manuel Weiss et al.

Summary: Fast charging is essential for the economic success of electric vehicles, with lithium-ion batteries facing limitations due to the transport of lithium ions within the electrodes. Understanding these limitations is crucial for optimizing material properties for fast-charging applications.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Microstructure engineering of solid-state composite cathode via solvent-assisted processing

Jibo Zhang et al.

Summary: This study increased the mass fraction of active materials in organic cathodes significantly through a solvent-assisted process, resulting in a substantial enhancement in electrode-level specific energy. By examining the unique interphase chemistry between the active materials and lithium thiophosphate, a potential-dependent reversible interphase evolution model was proposed.

JOULE (2021)

添加到收藏夹

Article Chemistry, Physical

High Performance All-Solid-State Batteries with a Ni-Rich NCM Cathode Coated by Atomic Layer Deposition and Lithium Thiophosphate Solid Electrolyte

David Kitsche et al.

Summary: The study demonstrates the positive effect of atomic layer deposition (ALD) HfO2 coating on the cyclic performance and stability of NCM-851005 cathode material. Post-annealing to change the coating morphology considerably improves cycling performance, especially the initial cycle Coulombic efficiency and rate capability.

ACS APPLIED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Toward Practical Solid-State Lithium-Sulfur Batteries: Challenges and Perspectives

Saneyuki Ohno et al.

Summary: Solid-state lithium-sulfur batteries offer high energy density and safety benefits by using sulfur as conversion-type material, but challenges include overcoming contact losses caused by volume changes of active materials and complexities in composite materials.

ACCOUNTS OF MATERIALS RESEARCH (2021)

添加到收藏夹

Article Chemistry, Physical

The role of polymers in lithium solid-state batteries with inorganic solid electrolytes

Sudeshna Sen et al.

Summary: Polymers play a crucial role in enhancing the performance of solid-state batteries, improving interfaces, cohesion, manufacture, and mechanical properties of the cells.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Design-of-experiments-guided optimization of slurry-cast cathodes for solid-state batteries

Jun Hao Teo et al.

Summary: The study used a design of experiments (DoE) approach to evaluate the influence of polymer binder and conductive carbon additive on SSB cells, discovering that the optimized combination can enhance electrochemical performance and processability.

CELL REPORTS PHYSICAL SCIENCE (2021)

添加到收藏夹

Review Chemistry, Physical

Solid-State Li-Metal Batteries: Challenges and Horizons of Oxide and Sulfide Solid Electrolytes and Their Interfaces

Kun Joong Kim et al.

Summary: The introduction of new, safe, and reliable solid-electrolyte chemistries and technologies can potentially overcome the challenges facing their liquid counterparts while widening the breadth of possible applications. Through analyzing the transition from liquid-based Li-ion batteries (LIBs) to all-solid-state Li-metal batteries (ASSLBs), a roadmap for the development of a successful oxide and sulfide-based ASSLB is introduced, focusing on interfacial challenges and considering parameters such as energy density, power density, longterm stability, processing, and safety.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Electrochemistry

Analysis of Charge Carrier Transport Toward Optimized Cathode Composites for All-Solid-State Li-S Batteries

Georg F. Dewald et al.

Summary: The study investigates the charge transport and cyclability of composite cathodes consisting of sulfur, Li6PS5Cl, and carbon, with varying volume fractions of ion- and electron-conducting phases. The findings reveal that ionic transport is identified as a critical bottleneck, despite high tortuosity factors in both effective electronic and ionic conductivities. This work underscores the importance of quantitative transport analysis as a tool for cathode optimization.

BATTERIES & SUPERCAPS (2021)

添加到收藏夹

Article Energy & Fuels

Modeling the Influence of Mixing Strategies on Microstructural Properties of All-Solid-State Electrodes

Vincent Laue et al.

ENERGY TECHNOLOGY (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Analysis of Interfacial Effects in All-Solid-State Batteries with Thiophosphate Solid Electrolytes

Anton Neumann et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Modeling Effective Ionic Conductivity and Binder Influence in Composite Cathodes for All-Solid-State Batteries

Anja Bielefeld et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Engineering, Chemical

Modeling the Electrical Conductive Paths within All-Solid-State Battery Electrodes

Clara Sangros Gimenez et al.

CHEMICAL ENGINEERING & TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Physical

Effect of positive electrode microstructure in all-solid-state lithium-ion battery on high-rate discharge capability

Shunsuke Yamakawa et al.

SOLID STATE IONICS (2020)

添加到收藏夹

Article Chemistry, Physical

Ni-Rich Layered Cathode Materials with Electrochemo-Mechanically Compliant Microstructures for All-Solid-State Li Batteries

Sung Hoo Jung et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Cobalt-Free High-Capacity Ni-Rich Layered Li[Ni0.9Mn0.1]O2 Cathode

Assylzat Aishova et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

High Active Material Loading in All-Solid-State Battery Electrode via Particle Size Optimization

Tan Shi et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Gas Evolution in Lithium-Ion Batteries: Solid versus Liquid Electrolyte

Florian Strauss et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Passivation of the Cathode-Electrolyte Interface for 5 V-Class All-Solid-State Batteries

Gaozhan Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Energy & Fuels

Benchmarking the performance of all-solid-state lithium batteries

Simon Randau et al.

NATURE ENERGY (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Enhancing the Electrochemical Performance of LiNi0.70C0.15Mn0.15O2 Cathodes Using a Practical Solution-Based Al2O3 Coating

Rajendra S. Negi et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Interfaces and Interphases in All-Solid-State Batteries with Inorganic Solid Electrolytes

Abhik Banerjee et al.

CHEMICAL REVIEWS (2020)

添加到收藏夹

Article Chemistry, Physical

Influence of Carbon Additives on the Decomposition Pathways in Cathodes of Lithium Thiophosphate-Based All-Solid-State Batteries

Felix Walther et al.

CHEMISTRY OF MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

High loading CuS-based cathodes for all-solid-state lithium sulfur batteries with enhanced volumetric capacity

Seyed Milad Hosseini et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Atomic-Level Understanding of Surface Reconstruction Based on Li[NixMnyCo1-x-y]O2 Single-Crystal Studies

Jian Zhu et al.

ACS APPLIED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Digital Twin-Driven All-Solid-State Battery: Unraveling the Physical and Electrochemical Behaviors

Joonam Park et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Direct Visualization of the Interfacial Degradation of Cathode Coatings in Solid State Batteries: A Combined Experimental and Computational Study

Ya-Qian Zhang et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Stress distribution in the composite electrodes of sulfide all-solid-state lithium-ion batteries

Akinari Ohashi et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Chemistry, Physical

Macroscopic Displacement Reaction of Copper Sulfide in Lithium Solid-State Batteries

Aggunda L. Santhosha et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Editorial Material Chemistry, Physical

Promising All-Solid-State Batteries for Future Electric Vehicles

Yang-Kook Sun

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Li2ZrO3-Coated NCM622 for Application in Inorganic Solid-State Batteries: Role of Surface Carbonates in the Cycling Performance

Florian Strauss et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Electrochemistry

Influence of NCM Particle Cracking on Kinetics of Lithium-Ion Batteries with Liquid or Solid Electrolyte

Raffael Ruess et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

添加到收藏夹

Review Electrochemistry

Degradation Mechanisms and Mitigation Strategies of Nickel-Rich NMC-Based Lithium-Ion Batteries

Tianyu Li et al.

ELECTROCHEMICAL ENERGY REVIEWS (2020)

添加到收藏夹

Article Electrochemistry

All-Dry Synthesis of Single Crystal NMC Cathode Materials for Li-Ion Batteries

Lituo Zheng et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Solid-state lithium-sulfur batteries: Advances, challenges and perspectives

Bing Ding et al.

MATERIALS TODAY (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Influence of electronically conductive additives on the cycling performance of argyrodite-based all-solid-state batteries

Florian Strauss et al.

RSC ADVANCES (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Progress and perspectives on halide lithium conductors for all-solid-state lithium batteries

Xiaona Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Rational Design of Quasi-Zero-Strain NCM Cathode Materials for Minimizing Volume Change Effects in All-Solid-State Batteries

Florian Strauss et al.

ACS MATERIALS LETTERS (2020)

添加到收藏夹

Review Chemistry, Physical

Challenges and Key Parameters of Lithium-Sulfur Batteries on Pouch Cell Level

Susanne Doerfler et al.

JOULE (2020)

添加到收藏夹

Article Chemistry, Physical

Pressure effects on sulfide electrolytes for all solid-state batteries

Jean-Marie Doux et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Electrochemistry

Guidelines for Optimizing the Architecture of Battery Insertion Electrodes with Ohmic Surface, Coating, or Electrolyte Resistances

Robert Usiskin et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

添加到收藏夹

Article Chemistry, Physical

Slurry-Fabricable Li+-Conductive Polymeric Binders for Practical All-Solid-State Lithium-Ion Batteries Enabled by Solvate Ionic Liquids

Doe Yang Oh et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Current Status and Future Prospects of Metal-Sulfur Batteries

Sheng-Heng Chung et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Observation of Chemomechanical Failure and the Influence of Cutoff Potentials in All-Solid-State Li-S Batteries

Saneyuki Ohno et al.

CHEMISTRY OF MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Visualization of the Interfacial Decomposition of Composite Cathodes in Argyrodite-Based All-Solid-State Batteries Using Time-of-Flight Secondary-Ion Mass Spectrometry

Felix Walther et al.

CHEMISTRY OF MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

On the Functionality of Coatings for Cathode Active Materials in Thiophosphate-Based All-Solid-State Batteries

Sean P. Culver et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

An Unavoidable Challenge for Ni-Rich Positive Electrode Materials for Lithium-Ion Batteries

Hongyang Li et al.

CHEMISTRY OF MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Al Substitution Induced Differences in Materials Structure and Electrochemical Performance of Ni-Rich Layered Cathodes for Lithium-Ion Batteries

Zheng-Yao Li et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

添加到收藏夹

Review Chemistry, Physical

Fundamentals of inorganic solid-state electrolytes for batteries

Theodosios Famprikis et al.

NATURE MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Elucidating Reversible Electrochemical Redox of Li6PS5CI Solid Electrolyte

Darren H. S. Tan et al.

ACS ENERGY LETTERS (2019)

添加到收藏夹

Article Chemistry, Physical

Stabilizing Effect of a Hybrid Surface Coating on a Ni-Rich NCM Cathode Material in All-Solid-State Batteries

A-Young Kim et al.

CHEMISTRY OF MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Microstructural Modeling of Composite Cathodes for All-Solid-State Batteries

Anja Bielefeld et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

添加到收藏夹

Article Chemistry, Physical

Single-crystal based studies for correlating the properties and high-voltage performance of Li[NixMnyCo1-x-y]O2 cathodes

Jian Zhu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Room temperature, liquid-phase Al2O3 surface coating approach for Ni-rich layered oxide cathode material

Sven Neudeck et al.

CHEMICAL COMMUNICATIONS (2019)

添加到收藏夹

Article Electrochemistry

Effect of Microstructure on the Ionic Conductivity of an All Solid-State Battery Electrode

Linus Froboese et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

添加到收藏夹

Review Chemistry, Physical

Managing transport properties in composite electrodes/electrolytes for all-solid-state lithium-based batteries

Marisa Falco et al.

MOLECULAR SYSTEMS DESIGN & ENGINEERING (2019)

添加到收藏夹

Article Electrochemistry

Electrochemical Properties of Composite Cathode Using Bimodal Sized Electrolyte for All-Solid-State Batteries

Chanhwi Park et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

添加到收藏夹

Article Chemistry, Physical

Overcoming binder limitations of sheet-type solid-state cathodes using a solvent-free dry-film approach

Felix Hippauf et al.

ENERGY STORAGE MATERIALS (2019)

添加到收藏夹

Review Chemistry, Physical

Solution-based synthesis of lithium thiophosphate superionic conductors for solid-state batteries: a chemistry perspective

Michael Ghidiu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Electrochemistry

Investigating the Effects of Magnesium Doping in Various Ni-Rich Positive Electrode Materials for Lithium Ion Batteries

Aaron Liu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

添加到收藏夹

Article Electrochemistry

Lithium Metal Polymer Electrolyte Batteries: Opportunities and Challenges

Jijeesh Ravi Nair et al.

ELECTROCHEMICAL SOCIETY INTERFACE (2019)

添加到收藏夹

Article Electrochemistry

Life Cycle Analysis of Lithium-Ion Batteries for Automotive Applications

Qiang Dai et al.

BATTERIES-BASEL (2019)

添加到收藏夹

Review Chemistry, Physical

A review on strategies addressing interface incompatibilities in inorganic all-solid-state lithium batteries

Ashim Gurung et al.

SUSTAINABLE ENERGY & FUELS (2019)

添加到收藏夹

Review Energy & Fuels

Research Progress of the Solid State Lithium-Sulfur Batteries

HangChao Wang et al.

FRONTIERS IN ENERGY RESEARCH (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Understanding Conversion-Type Electrodes for Lithium Rechargeable Batteries

Seung-Ho Yu et al.

ACCOUNTS OF CHEMICAL RESEARCH (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Capacity Fading Mechanism of the Commercial 18650 LiFePO4-Based Lithium-Ion Batteries: An in Situ Time-Resolved High-Energy Synchrotron XRD Study

Qi Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Degradation Mechanisms at the Li10GeP2S12/LiCoO2 Cathode Interface in an All-Solid-State Lithium-Ion Battery

Wenbo Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

High Capacity Garnet-Based All-Solid-State Lithium Batteries: Fabrication and 3D-Microstructure Resolved Modeling

Martin Finsterbusch et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Promises, Challenges, and Recent Progress of Inorganic Solid-State Electrolytes for All-Solid-State Lithium Batteries

Zhonghui Gao et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Chemo-mechanical expansion of lithium electrode materials - on the route to mechanically optimized all-solid-state batteries

Raimund Koerver et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

Ion transport limitations in all-solid-state lithium battery electrodes containing a sulfide-based electrolyte

N. Kaiser et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Article Chemistry, Physical

The influence of void space on ion transport in a composite cathode for all-solid-state batteries

Dzmitry Hlushkou et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Article Chemistry, Physical

Toward practical all-solid-state lithium-ion batteries with high energy density and safety: Comparative study for electrodes fabricated by dry- and slurry-mixing processes

Young Jin Nam et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Electrochemical Reaction Mechanism of the MoS2 Electrode in a Lithium-Ion Cell Revealed by in Situ and Operando X-ray Absorption Spectroscopy

Liang Zhang et al.

NANO LETTERS (2018)

添加到收藏夹

Article Chemistry, Physical

Guidelines for optimizing the architecture of battery insertion electrodes based on the concept of wiring lengths

Robert E. Usiskin et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2018)

添加到收藏夹

Article Chemistry, Physical

High Capacity All-Solid-State Lithium Batteries Enabled by Pyrite-Sulfur Composites

Ulderico Ulissi et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Design Strategies, Practical Considerations, and New Solution Processes of Sulfide Solid Electrolytes for All-Solid-State Batteries

Kern Ho Park et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Binder-free sheet-type all-solid-state batteries with enhanced rate capabilities and high energy densities

Mari Yamamoto et al.

SCIENTIFIC REPORTS (2018)

添加到收藏夹

Article Chemistry, Physical

Impact of Cathode Material Particle Size on the Capacity of Bulk-Type All-Solid-State Batteries

Florian Strauss et al.

ACS ENERGY LETTERS (2018)

添加到收藏夹

Review Chemistry, Physical

Addressing Interfacial Issues in Liquid-Based and Solid-State Batteries by Atomic and Molecular Layer Deposition

Yang Zhao et al.

JOULE (2018)

添加到收藏夹

Article Chemistry, Physical

Between Scylla and Charybdis: Balancing Among Structural Stability and Energy Density of Layered NCM Cathode Materials for Advanced Lithium-Ion Batteries

Lea de Biasi et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

添加到收藏夹

Article Electrochemistry

Electronic and Ionic Conductivities of LiNi1/3Mn1/3Co1/3O2-Li3PS4 Positive Composite Electrodes for All-Solid-State Lithium Batteries

Takamasa Asano et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

添加到收藏夹

Article Chemistry, Physical

Modeling of internal mechanical failure of all-solidstate batteries during electrochemical cycling, and implications for battery design

Giovanna Bucci et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

添加到收藏夹

Article Chemistry, Physical

Redox-active cathode interphases in solid-state batteries

Raimund Koerver et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

The Detrimental Effects of Carbon Additives in Li10GeP2S12-Based Solid-State Batteries

Wenbo Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Interfacial Processes and Influence of Composite Cathode Microstructure Controlling the Performance of All-Solid-State Lithium Batteries

Wenbo Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Chemistry, Physical

Interface Stability of Argyrodite Li6PS5Cl toward LiCoO2, LiNi1/3Co1/3Mn1/3O2, and LiMn2O4 in Bulk All-Solid-State Batteries

Jeremie Auvergniot et al.

CHEMISTRY OF MATERIALS (2017)

添加到收藏夹

Review Chemistry, Multidisciplinary

Inorganic Solid-State Electrolytes for Lithium Batteries: Mechanisms and Properties Governing Ion Conduction

John Christopher Bachman et al.

CHEMICAL REVIEWS (2016)

添加到收藏夹

Article Chemistry, Physical

Bulk-Type All Solid-State Batteries with 5 V Class LiNi0.5Mn1.5O4 Cathode and Li10GeP2S12 Solid Electrolyte

Gwangseok Oh et al.

CHEMISTRY OF MATERIALS (2016)

添加到收藏夹

Article Chemistry, Physical

Influence of electrolyte additives on the cathode electrolyte interphase (CEI) formation on LiNi1/3Mn1/3Co1/3O2 in half cells with Li metal counter electrode

Yunxian Qian et al.

JOURNAL OF POWER SOURCES (2016)

添加到收藏夹

Article Chemistry, Physical

5 V class LiNi0.5Mn1.5O4 positive electrode coated with Li3PO4 thin film for all-solid-state batteries using sulfide solid electrolyte

So Yubuchi et al.

SOLID STATE IONICS (2016)

添加到收藏夹

Review Chemistry, Physical

Polymer electrolytes for lithium polymer batteries

Lizhen Long et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

添加到收藏夹

Review Energy & Fuels

Advances in lithium-sulfur batteries based on multifunctional cathodes and electrolytes

Quan Pang et al.

NATURE ENERGY (2016)

添加到收藏夹

Editorial Material Energy & Fuels

A solid future for battery development

Juergen Janek et al.

NATURE ENERGY (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ultrafine Iron Pyrite (FeS2) Nanocrystals Improve Sodium-Sulfur and Lithium-Sulfur Conversion Reactions for Efficient Batteries

Anna Douglas et al.

ACS NANO (2015)

添加到收藏夹

Article Electrochemistry

Electrochemical verification of the redox mechanism of FeS2 in a rechargeable lithium battery

Sheng S. Zhang et al.

ELECTROCHIMICA ACTA (2015)

添加到收藏夹

Article Chemistry, Physical

Improved electrochemical and thermal properties of nickel rich LiNi0.6Co0.2Mn0.2O2 cathode materials by SiO2 coating

Woosuk Cho et al.

JOURNAL OF POWER SOURCES (2015)

添加到收藏夹

Article Chemistry, Physical

A rocking chair type all-solid-state lithium ion battery adopting Li2O-ZrO2 coated LiNi0.8Co0.15Al0.05O2 and a sulfide based electrolyte

Seitaro Ito et al.

JOURNAL OF POWER SOURCES (2014)

添加到收藏夹

Article Chemistry, Physical

Copper sulfides for rechargeable lithium batteries: Linking cycling stability to electrolyte composition

Birte Jache et al.

JOURNAL OF POWER SOURCES (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-purity iron pyrite (FeS2) nanowires as high-capacity nanostructured cathodes for lithium-ion batteries

Linsen Li et al.

NANOSCALE (2014)

添加到收藏夹

Review Chemistry, Multidisciplinary

Understanding Li Diffusion in Li-Intercalation Compounds

Anton Van der Ven et al.

ACCOUNTS OF CHEMICAL RESEARCH (2013)

添加到收藏夹

Article Electrochemistry

Insights about the irreversible capacity of LiNi0.5Mn1.5O4 cathode materials in lithium batteries

Sergio Brutti et al.

ELECTROCHIMICA ACTA (2013)

添加到收藏夹

Article Chemistry, Physical

Understanding Transition-Metal Dissolution Behavior in LiNi0.5Mn1.5O4 High-Voltage Spinel for Lithium Ion Batteries

Nicholas P. W. Pieczonka et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2013)

添加到收藏夹

Article Chemistry, Physical

Effect of mixing method on the properties of composite cathodes for all-solid-state lithium batteries using Li2S-P2S5 solid electrolytes

Junghoon Kim et al.

JOURNAL OF POWER SOURCES (2013)

添加到收藏夹

Article Chemistry, Physical

Solid State Enabled Reversible Four Electron Storage

Thomas A. Yersak et al.

ADVANCED ENERGY MATERIALS (2013)

添加到收藏夹

Article Chemistry, Physical

Galvanostatic Intermittent Titration Technique for Phase-Transformation Electrodes

Yujie Zhu et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2010)

添加到收藏夹

Article Electrochemistry

All-Solid-State Lithium Secondary Batteries Using LiMn2O4 Electrode and Li2S-P2S5 Solid Electrolyte

Hirokazu Kitaura et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)

添加到收藏夹

Article Physics, Applied

Solid polymer electrolytes: materials designing and all-solid-state battery applications: an overview

R. C. Agrawal et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2008)

添加到收藏夹

Article Chemistry, Physical

Interfacial modification for high-power solid-state lithium batteries

Kazunon Takada et al.

SOLID STATE IONICS (2008)

添加到收藏夹

Article Electrochemistry

Ionic/electronic conducting characteristics of LiFePO4 cathode materials - The determining factors for high rate performance

Chunsheng Wang et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2007)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

Reactivity of transition metal (Co, Ni, Cu) sulphides versus lithium: The intriguing case of the copper sulphide

A. Debart et al.

SOLID STATE SCIENCES (2006)

添加到收藏夹

Article Chemistry, Physical

Cracking causing cyclic instability of LiFePO4 cathode material

DY Wang et al.

JOURNAL OF POWER SOURCES (2005)

添加到收藏夹

Article Electrochemistry

All-solid-state Li/S batteries with highly conductive glass-ceramic electrolytes

A Hayashi et al.

ELECTROCHEMISTRY COMMUNICATIONS (2003)

添加到收藏夹

Article Chemistry, Physical

To the electrochemistry of pyrite in Li/solid composite-polymer-electrolyte battery

E Strauss et al.

JOURNAL OF POWER SOURCES (2003)

添加到收藏夹

Article Chemistry, Physical

Fabrications and properties of composite solid-state electrolytes

T Inada et al.

SOLID STATE IONICS (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.