相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Effects of deep cryogenic treatment on machinability, hardness and microstructure in dry turning process of tempered steels
Menderes Kam
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2021)
Improvement of machinability of Ti and its alloys using cooling-lubrication techniques: a review and future prospect
Danil Yu Pimenov et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Development and analysis of tool wear and energy consumption maps for turning of titanium alloy (Ti6Al4V)
Muhammad Younas et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Experimental investigation of the effect of machinability on surface quality and vibration in hard turning of hardened AISI 4140 steels using ceramic cutting tools
Menderes Kam et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2021)
The effect of micro-texture on wear resistance of WC/Co-based tools during cutting Ti-6Al-4V
Xiaoyan Sun et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2021)
Tribological performance based machinability investigations in cryogenic cooling assisted turning of α-β titanium Alloy
Munish Kumar Gupta et al.
TRIBOLOGY INTERNATIONAL (2021)
Investigation of the influence of MWCNTs mixed nanofluid on the machinability characteristics of PH 13-8 Mo stainless steel
Oguzhan Ondin et al.
TRIBOLOGY INTERNATIONAL (2020)
Sustainability assessment of dry turning Ti-6Al-4V employing uncoated cemented carbide tools as clean manufacturing process
Xiaoliang Liang et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Investigation of machining characteristics of hard-to-machine Ti-6Al-4V-ELI alloy for biomedical applications
Swasthilz Pradhan et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
STUDIES ON THE EFFECT OF PROCESS PARAMETERS IN TURNING OF Ti-6Al-4V ALLOY USING TOPSIS
Charitha M. Rao et al.
INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND MANUFACTURING APPLICATIONS (ICONAMMA-2018) (2019)
Wear and surface roughness analysis of machining of Ti-6Al-4V under dry, wet and cryogenic conditions
Muhammad Ali Khan et al.
6TH INTERNATIONAL CONFERENCE ON MECHANICAL, MATERIALS AND MANUFACTURING (2019)
Influence of oxygen on the tool wear in machining
Volodymyr Bushlya et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2018)
Influences of tool structure, tool material and tool wear on machined surface integrity during turning and milling of titanium and nickel alloys: a review
Bing Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Tribological characteristics and wear mechanism of cemented carbide tool in dry machining Ti-6Al-4V
Yi Hang Fan et al.
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY (2017)
Statistical analysis of process parameters in micromachining of Ti-6Al-4V alloy
Syed H. Imran Jaffery et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2016)
Effects of cutting parameters on dry machining Ti-6Al-4V alloy with ultra-hard tools
F. J. Sun et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Machining of Titanium Alloy (Ti-6Al-4V)-Theory to Application
Alokesh Pramanik et al.
MACHINING SCIENCE AND TECHNOLOGY (2015)
Tool wear analysis and improvement of cutting conditions using the high-pressure water-jet assistance when machining the Ti17 titanium alloy
Y. Ayed et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2015)
Effect of cryogenic cooling on machinability and surface quality of bio-degradable ZK60 Mg alloy
S. Dinesh et al.
MATERIALS & DESIGN (2015)
Influence of cutting speed and tool wear on the surface integrity of the titanium alloy Ti-1023 during milling
Yang Houchuan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
On Cutting Temperature Measurement During Titanium Machining With an Atomization-Based Cutting Fluid Spray System
Alexander C. Hoyne et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2015)
Tool wear patterns when turning of titanium alloy using sustainable lubrication strategies
Syed Waqar Raza et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2014)
Measuring temperature of rotating cutting tools: Application to MQL drilling and dry milling of aerospace alloys
G. Le Coz et al.
APPLIED THERMAL ENGINEERING (2012)
Understanding the tool wear mechanism during thermally assisted machining Ti-6Al-4V
M. J. Bermingham et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
New observations on tool wear mechanism in dry machining Inconel718
Zhaopeng Hao et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)
A study of the effect of palm oil as MQL lubricant on high speed drilling of titanium alloys
E. A. Rahim et al.
TRIBOLOGY INTERNATIONAL (2011)
Effect of cutting atmosphere on dry machining performance with Al2O3/ZrB2/ZrO2 ceramic tool
Bin Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Tool wear and cutting forces variation in high-speed end-milling Ti-6Al-4V alloy
S. Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Investigation on diffusion wear during high-speed machining Ti-6Al-4V alloy with straight tungsten carbide tools
S. Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Cooling techniques for improved productivity in turning
Vishal S. Sharma et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Characteristics of cutting forces and chip formation in machining of titanium alloys
S. Sun et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Diffusion wear in dry cutting of Ti-6Al-4V with WC/Co carbide tools
Deng Jianxin et al.
WEAR (2008)
Production and characterization of ZrO2 ceramics and composites to be used for hip prosthesis
Melis Arin et al.
JOURNAL OF MATERIALS SCIENCE (2008)
Growth of tool wear in turning of Ti-6Al-4V alloy under cryogenic cooling
K. A. Venugopal et al.
WEAR (2007)
Toughening of yttria-stabilised tetragonal zirconia ceramics
B Basu
INTERNATIONAL MATERIALS REVIEWS (2005)
Progressive tool-wear in machining with coated grooved tools and its correlation with cutting temperature
PC Wanigarathne et al.
WEAR (2005)
High-speed milling of titanium alloys using binderless CBN tools
ZG Wang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Dry machining and minimum quantity lubrication
K Weinert et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2004)
An overview of the machinability of aeroengine alloys
EO Ezugwu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Machinability of hardened steel using alumina based ceramic cutting tools
AS Kumar et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2003)
Wear mechanismes of new tool materials for Ti-6Al-4V high performance machining
N Corduan et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2003)
Tool life and surface integrity in turning titanium alloy
CH Che-Haron
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Wear mechanisms of ultra-hard cutting tools materials
F Nabhani
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Cutting fluid aerosol generation due to spin-off in turning operation: Analysis for environmentally conscious machining
Z Chen et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2001)
The performance of CBN tools in the machining of titanium alloys
ZA Zoya et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2000)