☆ 4.7 Article

Effect of alumina particulate and E-glass fiber reinforced epoxy composite on erosion wear behavior using Taguchi orthogonal array

TRIBOLOGY INTERNATIONAL (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Composites

Mechanical and two-body wear characterization of micro-nano ceramic particulate reinforced dental restorative composite materials

Ramkumar Yadav et al.

Summary: The investigation aims to develop resin-based dental restorative composite material reinforced with marble dust powder (MDP) - silane coated nano-hydroxyapatite (nHA) and study the effects on various characteristics. The study revealed that dental composite with 8 wt% nHA exhibited the highest hardness, compressive, and flexural strength. Water sorption and water solubility increased while the degree of conversion and depth of cure decreased with the increase in nHA content. Taguchi analysis identified that the dental composite with 6 wt% nano-hydroxyapatite under specific conditions exhibited the minimum wear rate. ANOVA analysis showed that the load factor had a considerable effect on the specific wear rate.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Materials Science, Composites

Fabrication and characterization of micro alumina zirconia particulate filled dental restorative composite materials

Anoj Meena et al.

Summary: Composite resin is increasingly utilized in cosmetic and restorative dentistry, with the addition of micro-alumina and zirconia particulates improving its physical and mechanical properties while reducing wear. The study found that normal load and filler content significantly affect the volumetric wear of dental composites, with AZDC6 showing the highest compressive strength. The research highlights the importance of optimizing these factors to enhance the performance of dental composite materials.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Materials Science, Ceramics

Comparative investigation of tribological behavior of hybrid dental restorative composite materials

Ramkumar Yadav et al.

Summary: This study examines the tribological aspects of micro-nano particulate filled dental restorative composite materials. It was found that incorporating high amounts of nano-hydroxyapatite nanoparticles can improve the wear properties of dental composites.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Article Materials Science, Composites

Tribological behavior of zinc oxide-hydroxyapatite particulates filled dental restorative composite materials

Ramkumar Yadav et al.

Summary: The objective of this study was to examine the tribological behavior of micro-nano particulates filled dental restorative composite material. The study found that the specific-wear-rate decreased with the variation of load, while it increased with the variation of sliding velocity and time. The dental composite incorporated with 8 wt% nano-hydroxyapatite exhibited the minimum specific-wear-rate under specific conditions.

POLYMER COMPOSITES (2022)

添加到收藏夹

Review Polymer Science

Biomaterials for dental composite applications: A comprehensive review of physical, chemical, mechanical, thermal, tribological, and biological properties

Ramkumar Yadav et al.

Summary: Biomaterials play a significant role in dental composite materials and implants, requiring evaluation of their physical, mechanical, wear, and biocompatibility properties. This review focuses on the essential features associated with the mechanical, biological, and microstructural properties of biomaterials used in dental composites or implants. It also explores the successful use of diverse materials and processing techniques to enhance the characteristics of dental materials or implants.

POLYMERS FOR ADVANCED TECHNOLOGIES (2022)

添加到收藏夹

Article Materials Science, Ceramics

Effect of aluminium oxide, titanium oxide, hydroxyapatite filled dental restorative composite materials on physico-mechanical properties

Ramkumar Yadav et al.

Summary: This study investigated the effects of nano-hydroxyapatite on the physical, chemical, and mechanical characteristics of dental resin composite materials. The DHA series showed superior performance compared to the DHT series.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Article Engineering, Biomedical

Ranking and selection of dental restorative composite materials using FAHP-FTOPSIS technique: An application of multi criteria decision making technique

Ramkumar Yadav et al.

Summary: In this study, the optimal formulations of dental restorative composite materials were determined using a hybrid FAHP-FTOPSIS approach. Various performance defining attributes were considered, and the weight criteria were evaluated using FAHP. The results showed that DHZ4 was the best choice. This research is significant for evaluating different types of dental restorative composite materials.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2022)

添加到收藏夹

Article Polymer Science

Fabrication, characterization, and selection using FAHP-TOPSIS technique of zirconia, titanium oxide, and marble dust powder filled dental restorative composite materials

Ramkumar Yadav et al.

Summary: This article aims to develop and characterize a nano-micro ceramic particle-filled polymer-based composite for dental materials, and ranks dental composites using a hybrid fuzzy analytic hierarchy process (FAHP) and fuzzy technique for order of preference by similarity to ideal solution (FTOPSIS) methodology. Physical and mechanical properties of different dental formulations were investigated to guide material selection.

POLYMERS FOR ADVANCED TECHNOLOGIES (2022)

添加到收藏夹

Article Materials Science, Composites

Analytic hierarchy process-technique for order preference by similarity to ideal solution: A multi criteria decision-making technique to select the best dental restorative composite materials

Ramkumar Yadav

Summary: This study investigates the optimal selection of dental composites using AHP and TOPSIS, which reveals that the AHP-TOPSIS method is an effective MCDM strategy for ranking under different performance defining criteria.

POLYMER COMPOSITES (2021)

添加到收藏夹

Article Materials Science, Composites

Investigation of the physical, mechanical and thermal properties of nano and microsized particulate-filled dental composite material

Ramkumar Yadav et al.

JOURNAL OF COMPOSITE MATERIALS (2020)

添加到收藏夹

Review Dentistry, Oral Surgery & Medicine

Dental restorative composite materials: A review

Ramkumar Yadav et al.

JOURNAL OF ORAL BIOSCIENCES (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Fabrication and thermo-mechanical characterization of glass fiber/vinyl ester wind turbine rotor blade

Umair Javaid et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Mechanical properties of fire-retardant glass fiber-reinforced polymer materials with alumina tri-hydrate filler

Michaela R. Petersen et al.

COMPOSITES PART B-ENGINEERING (2015)

添加到收藏夹

Article Materials Science, Composites

Mechanical properties and slurry erosion resistance of SiC ceramic foam/epoxy co-continuous phase composite

Z. H. Ren et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2015)

添加到收藏夹

Proceedings Paper Automation & Control Systems

Erosion Resistance of Slip Cast Composite Al2O3-ZrO2 Ceramics

Marijana Majic Renjo et al.

25TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2014 (2015)

添加到收藏夹

Proceedings Paper Nanoscience & Nanotechnology

An Investigation On ILSS Properties Of Unidirectional Glass Fibre/Alumina Nanoparticles Filled Epoxy Nanocomposite At Different Angles Of Fibre Orientations

M. Rajanish et al.

2ND INTERNATIONAL CONFERENCE ON NANOMATERIALS AND TECHNOLOGIES (CNT 2014) (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Application of Taguchi method on optimization of testing parameters for erosion of glass fiber reinforced epoxy composite materials

Mehmet Bagci et al.

MATERIALS & DESIGN (2013)

添加到收藏夹

Proceedings Paper Computer Science, Interdisciplinary Applications

Erosion Wear Performance Analysis of Polyester-GF-Granite Hybrid Composites using the Taguchi Method

Arun Rout et al.

INTERNATIONAL CONFERENCE ON MODELLING OPTIMIZATION AND COMPUTING (2012)

添加到收藏夹

Review Engineering, Mechanical

Solid particle erosion wear characteristics of fiber and particulate filled polymer composites: A review

Amar Patnaik et al.

WEAR (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study on mechanical and erosion wear behavior of hybrid composites using Taguchi experimental design

S. S. Mahapatra et al.

MATERIALS & DESIGN (2009)

添加到收藏夹

Article Engineering, Mechanical

Taguchi method applied to parametric appraisal of erosion behavior of GF-reinforced polyester composites

S. S. Mahapatra et al.

WEAR (2008)

添加到收藏夹

Article Materials Science, Characterization & Testing

Study of erosion efficiency of polymers and polymer composites

S Arjula et al.

POLYMER TESTING (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.