☆ 4.7 Article

Application of nonlinear ultrasonic analysis for in situ monitoring of metal additive manufacturing

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Acoustics

Simulation and experimental research on nonlinear ultrasonic testing of composite material porosity

Xianghong Wang et al.

Summary: This paper simulates and tests the nonlinear ultrasonic testing of composite porosity, investigating the relationship between pore parameters and ultrasonic propagation characteristics. The results show that the relative nonlinear coefficient is related to pore length, pore width, and porosity, providing a reference for detecting the porosity of composite materials using nonlinear ultrasonic technology.

APPLIED ACOUSTICS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Online geometry monitoring during directed energy deposition additive manufacturing using laser line scanning

Eden Binega et al.

Summary: Additive manufacturing (AM) is a powerful manufacturing technology with increasing demands, but controlling the geometry of deposited objects remains a challenge. This study developed an online geometry estimation methodology using a laser line scanner during the directed energy deposition (DED) process, allowing real-time scanning and comparison of as-designed and as-built models for high-precision prototypes.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2022)

添加到收藏夹

Article Acoustics

An improved nonlinear ultrasonic technique for detecting and monitoring impact induced damage in composite plates

H. Alnuaimi et al.

Summary: An improved technique for sensing damage initiation and progression in thermoplastic resin composite plate specimens was presented in this study. The new method includes introducing the narrow band SPC-I technique, using non-permanently adhered gel-coupled PZT transducers, and employing higher sampling rate equipment. This improved technique provides more reliable and consistent results in monitoring damage progression.

ULTRASONICS (2022)

添加到收藏夹

Article Engineering, Industrial

Leveraging simulated and empirical data-driven insight to supervised-learning for porosity prediction in laser metal deposition

Vidita Gawade et al.

Summary: This study contributes to digital-twin manufacturing in laser-based additive manufacturing by combining finite element analysis (FEA) and pyrometry-based sensors to study the thermal behavior of melt pools and predict the porosity of parts. A hybrid model is proposed to capture the strengths of simulated data and real-world empirical data and accurately predict melt pool porosity.

JOURNAL OF MANUFACTURING SYSTEMS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Acoustic emission wave classification for rail crack monitoring based on synchrosqueezed wavelet transform and multi-branch convolutional neural network

Dan Li et al.

Summary: This study focuses on the classification of acoustic emission waves using synchrosqueezed wavelet transform and multi-branch convolutional neural network to accurately identify different acoustic emission mechanisms, including surface and internal rail cracks.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Monitoring damage in composite plates from crack initiation to macro-crack propagation combining linear and nonlinear ultrasonic techniques

Hamad Alnuaimi et al.

Summary: A holistic technique combining linear and nonlinear ultrasonic techniques was proposed for monitoring damage in composite plates. By using multiple sets of specimens made of different materials, it was found that linear and nonlinear ultrasonic parameters exhibit different monitoring effects in various stages of damage progression.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2021)

添加到收藏夹

Article Construction & Building Technology

Nondestructive assessment of microcracks detection in cementitious materials based on nonlinear ultrasonic modulation technique

Ying Xu et al.

Summary: This study proposed a method to evaluate the development of concrete microcracks based on the theory of nonlinear ultrasonic modulation, using the edge-band peak counting method and the concept of damage index (DI). Experimental results showed that DI increases with the development of microcracks, indicating a higher alkali-aggregate reaction degree. It was concluded that the nonlinear ultrasonic modulation method could be a good indicator of damage in cementitious material structures.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Engineering, Manufacturing

Deep Learning-Based Data Fusion Method for In Situ Porosity Detection in Laser-Based Additive Manufacturing

Qi Tian et al.

Summary: This paper introduces a deep learning-based data fusion method to predict porosity in Laser-based additive manufacturing (LBAM) parts by leveraging the measured melt pool thermal history and two newly created deep learning neural networks. The predictions from the neural networks are fused at the decision-level to obtain a more accurate prediction of porosity. The results demonstrate high accuracy and efficiency in in situ porosity detection in LBAM.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2021)

添加到收藏夹

Article Engineering, Manufacturing

Mechanical properties estimation of additively manufactured metal components using femtosecond laser ultrasonics and laser polishing

Seong-Hyun Park et al.

Summary: This study developed an online mechanical properties estimation technique for the DED process using femtosecond laser ultrasonics and laser polishing, achieving layer-by-layer estimation of mechanical properties with micrometer-level spatial resolution, which has significant implications for the field.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)

添加到收藏夹

Article Engineering, Manufacturing

Porosity in wire arc additive manufacturing of aluminium alloys

Tobias Hauser et al.

Summary: The study found a correlation between shielding gas flow rate and porosity in aluminum parts manufactured by Wire Arc Additive Manufacturing. A lower gas flow rate leads to reduced convective cooling, allowing the melt pool to remain liquid for a longer period, which helps in reducing porosity by allowing pores to escape for a longer period.

ADDITIVE MANUFACTURING (2021)

添加到收藏夹

Article Materials Science, Characterization & Testing

Porosity inspection in directed energy deposition additive manufacturing based on transient thermoreflectance measurement

Peipei Liu et al.

Summary: This study developed a transient thermoreflectance (TTR) technique using a femtosecond laser for porosity inspection in directed energy deposition (DED) additive manufacturing. By comparing thermoreflectance measured at different pump excitation modulation frequencies, the technique is sensitive to porosity rather than thermal property variation. The noncontact nature and scanning capability of the proposed technique make it feasible for in-situ monitoring of porosity during DED additive manufacturing.

NDT & E INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Characterization & Testing

Novel application of wavelet synchrosqueezed transform (WSST) in laser-vibrometer measurements for condition assessment of cementitious materials

P. Wiciak et al.

Summary: This study demonstrates the advantages of using wavelet synchrosqueezed transform (WSST) combined with wave attenuation approach for condition assessment of cementitious materials. WSST technique can effectively extract main vibration modes and characterize ultrasonic transducers. The results show that WSST technique can be used for early damage detection and improve the sensitivity of attenuation analysis in detecting localized damage.

NDT & E INTERNATIONAL (2021)

添加到收藏夹

Review Multidisciplinary Sciences

Material-structure-performance integrated laser-metal additive manufacturing

Dongdong Gu et al.

Summary: The advancement of laser-metal additive manufacturing has enabled the printing of multimaterial/multifunctional designs to meet the increasing demand from industries such as aviation, aerospace, automobile manufacturing, and energy production. By integrating material-structure-performance, major improvements in performance and function can be achieved through the right materials printed in the right positions and unique structures printed for unique functions. This approach exemplifies the revolution of design and manufacturing strategies in additive manufacturing.

SCIENCE (2021)

添加到收藏夹

Article Multidisciplinary Sciences

In-situ porosity recognition for laser additive manufacturing of 7075-Al alloy using plasma emission spectroscopy

Wenjing Ren et al.

SCIENTIFIC REPORTS (2020)

添加到收藏夹

Article Engineering, Mechanical

Towards predicting differences in fatigue performance of laser powder bed fused Ti-6Al-4V coupons from the same build

P. Li et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

添加到收藏夹

Proceedings Paper Materials Science, Characterization & Testing

Influence of Surface Roughness from Additive Manufacturing on Laser Ultrasonics Measurements

Chaitanya Bakre et al.

45TH ANNUAL REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOL 38 (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Influence of low-frequency parameter changes on nonlinear vibro-acoustic wave modulations used for crack detection

Bin Liu et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2018)

添加到收藏夹

Review Engineering, Manufacturing

Optimisation of process parameters to address fundamental challenges during selective laser melting of Ti-6Al-4V: A review

H. Shipley et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

Additive manufacturing of metallic components - Process, structure and properties

T. DebRoy et al.

PROGRESS IN MATERIALS SCIENCE (2018)

添加到收藏夹

Review Engineering, Mechanical

A review on quality control in additive manufacturing

Hoejin Kim et al.

RAPID PROTOTYPING JOURNAL (2018)

添加到收藏夹

Article Acoustics

Damage detection using sideband peak count in spectral correlation domain

Peipei Liu et al.

JOURNAL OF SOUND AND VIBRATION (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evaluation of the heat-affected zone (HAZ) of a weld joint using nonlinear Rayleigh waves

Christoph Doerr et al.

MATERIALS LETTERS (2017)

添加到收藏夹

Article Acoustics

Mode identification of broadband Lamb wave signal with squeezed wavelet transform

Shen Wang et al.

APPLIED ACOUSTICS (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing

Sarah K. Everton et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Physics, Applied

Binding conditions for nonlinear ultrasonic generation unifying wave propagation and vibration

Hyung Jin Lim et al.

APPLIED PHYSICS LETTERS (2014)

添加到收藏夹

Article Materials Science, Characterization & Testing

Noncontact detection of fatigue cracks by laser nonlinear wave modulation spectroscopy (LNWMS)

Peipei Liu et al.

NDT & E INTERNATIONAL (2014)

添加到收藏夹

Article Engineering, Mechanical

On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance

S. Lenders et al.

INTERNATIONAL JOURNAL OF FATIGUE (2013)

添加到收藏夹

Article Materials Science, Characterization & Testing

Nondestructive Monitoring of Ageing of Alkali Resistant Glass Fiber Reinforced Cement (GRC)

J. N. Eiras et al.

JOURNAL OF NONDESTRUCTIVE EVALUATION (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hydrogen Transport and Rationalization of Porosity Formation during Welding of Titanium Alloys

Jianglin Huang et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)

添加到收藏夹

Article Mathematics, Applied

Synchrosqueezed wavelet transforms: An empirical mode decomposition-like tool

Ingrid Daubechies et al.

APPLIED AND COMPUTATIONAL HARMONIC ANALYSIS (2011)

添加到收藏夹

Article Materials Science, Characterization & Testing

Elastic-wave modulation approach to crack detection Comparison of conventional modulation and higher-order interactions

V. Yu Zaitsev et al.

NDT & E INTERNATIONAL (2011)

添加到收藏夹

Article Engineering, Multidisciplinary

Vibro-Acoustic Modulation Utilizing a Swept Probing Signal for Robust Crack Detection

Nathanael C. Yoder et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2010)

添加到收藏夹

Article Materials Science, Characterization & Testing

On the ultimate sensitivity of nonlinear-modulation method of crack detection

V. Yu. Zaitsev et al.

NDT & E INTERNATIONAL (2009)

添加到收藏夹

Article Engineering, Multidisciplinary

A Nonlinear Acoustic Technique for Crack Detection in Metallic Structures

Debaditya Dutta et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2009)

添加到收藏夹

Article Engineering, Manufacturing

Laser polishing of parts built up by selective laser sintering

A. Lamikiz et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.