4.7 Article

Detection and characterization of matrix cracking in fiber-metal laminates using Lamb wave propagation

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Multidisciplinary

Simulated Lamb wave propagation method for nondestructive monitoring of matrix cracking in laminated composites

A. Mardanshahi et al.

Summary: The study developed a simulated Lamb wave propagation method for nondestructive monitoring of matrix cracking in laminated composites by accurately estimating the damping coefficient of specimens. Results showed a relationship between damping coefficient and the rate of increase in damping coefficient with crack density, highlighting the significant contribution of damping from fiber-matrix interphase and crack regions to the overall damping of composite specimens.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2022)

Article Materials Science, Characterization & Testing

Non-destructive testing investigation of gaps in thin Glare laminates

Patryk Jakubczak et al.

Summary: In this research, ultrasonic inspections were conducted on Glare with pre-preg gaps to enhance the current technological level. By introducing gaps, performing ultrasonic testing, and collecting cross-sectional images of the laminate, a detailed assessment of the width, depth, and occurrence of the gaps was successfully achieved.

NONDESTRUCTIVE TESTING AND EVALUATION (2021)

Article Mechanics

Dispersion curves and identification of elastic wave modes for fiber metal laminates

A. Muc et al.

Summary: The study focuses on validating dispersion curves and simulating elastic wave modes for fiber metal laminates, considering different material combinations and stacking sequences to observe the generation of wave modes and the dispersion phenomenon.

COMPOSITE STRUCTURES (2021)

Article Construction & Building Technology

Guided wave-based damage assessment on welded steel I-beam under ambient temperature variations

Jia-Qi Tu et al.

Summary: A guided wave-based damage assessment method was proposed in this study, utilizing PCA and ICA for monitoring and localizing damages, with experimental results demonstrating successful detection of damages in the weld zone.

STRUCTURAL CONTROL & HEALTH MONITORING (2021)

Article Construction & Building Technology

Guided wave-based cable damage detection using wave energy transmission and reflection

Zhi-Feng Tang et al.

Summary: A magnetostrictive transducer-based guided wave method is proposed for cable damage detection in civil engineering structures, along with a wave energy-based approach for damage localization and severity assessment. Numerical and experimental studies confirmed the accuracy of determining damage locations and conditions using this method.

STRUCTURAL CONTROL & HEALTH MONITORING (2021)

Article Engineering, Manufacturing

Mechanical properties and failure mode of thin-ply fiber metal laminates under out-of-plane loading

Kohei Yamada et al.

Summary: The study showed that the number of metal layers in thin-ply fiber metal laminates (FMLs) affects the failure mode and mechanical properties during static flexural tests, with plastic deformation of the metal layers improving energy dissipation and leading to failure occurring in a limited range of locations.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Article Construction & Building Technology

Optimal sensors layout design based on reference-free damage localization with lamb wave propagation

Pouyan Keshavarz Motamed et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2020)

Article Construction & Building Technology

Estimation of remaining useful life of fatigued plate specimens using Lamb wave-based nonlinearity parameters

Peter Tse et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2020)

Article Engineering, Multidisciplinary

Modeling Ultrasonic Elastic Waves in Fiber-Metal Laminate Structures in Presence of Sources and Defects

Steffen Tai et al.

JOURNAL OF NONDESTRUCTIVE EVALUATION, DIAGNOSTICS AND PROGNOSTICS OF ENGINEERING SYSTEMS (2020)

Article Construction & Building Technology

Active detection of block mass and notch-type damages in metallic plates using a refined time-reversed Lamb wave technique

Jitendra Kumar Agrahari et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2018)

Article Engineering, Multidisciplinary

Detection and characterisation of disbonds on Fibre Metal Laminate hybrid composites by flying laser spot thermography

N. Montinaro et al.

COMPOSITES PART B-ENGINEERING (2017)

Article Materials Science, Multidisciplinary

Delamination detection and quantification on laminated composite structures with Lamb waves and wavenumber analysis

Zhenhua Tian et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2015)

Article Materials Science, Multidisciplinary

Delamination detection and impact damage assessment of GLARE by active thermography

Clemente Ibarra Castanedo et al.

INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY (2011)

Review Materials Science, Multidisciplinary

A review: Fibre metal laminates, background, bonding types and applied test methods

Tamer Sinmazcelik et al.

MATERIALS & DESIGN (2011)

Article Nanoscience & Nanotechnology

A study on tensile properties of a novel fiber/metal laminates

S. Ebrahim Moussavi-Torshizi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

Article Nanoscience & Nanotechnology

The response of aluminium/GLARE hybrid materials to impact and to in-plane fatigue

F. Bagnoli et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)

Article Nanoscience & Nanotechnology

A study of the mechanical properties of steel/aluminium/GRP laminates

SMR Khalili et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)

Article Materials Science, Composites

Lamb wave method for quick inspection of impact-induced delamination in composite laminates

N Toyama et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2004)

Article Materials Science, Composites

An historic overview of the development of fibre metal laminates

CAJR Vermeeren

APPLIED COMPOSITE MATERIALS (2003)

Article Materials Science, Composites

Nondestructive evaluation methods for damage assessment in fiber-metal laminates

A Fahr et al.

POLYMER COMPOSITES (2000)