☆ 4.6 Article

Sensing System Based on FBG for Corrosion Monitoring in Metallic Structures

SENSORS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

Development of Permanently Installed Magnetic Eddy Current Sensor for Corrosion Monitoring of Ferromagnetic Pipelines

Rukhshinda Wasif et al.

Summary: Permanently installed sensors are a cost-effective solution for corrosion monitoring, with advantages of less human interference and continuous data acquisition. This paper introduces a novel wireless magnetic eddy current sensor that does not require couplant and can be used over insulations. Sensitivity studies reveal that the excitation frequency is a critical parameter for detecting corrosion defects. Accelerated corrosion tests show that the sensor signals are highly sensitive to corrosion defects and unaffected by temperature and humidity changes.

APPLIED SCIENCES-BASEL (2022)

添加到收藏夹

Article Energy & Fuels

Assessment and detection of stress corrosion cracking by advanced eddy current array nondestructive testing and material characterization

Hossein Taheri et al.

Summary: Stress Corrosion Cracking (SCC) in oil and natural gas pipelines can be effectively detected and characterized using electromagnetic Nondestructive Inspection (NDI) techniques.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Crystallographic effects on transgranular chloride-induced stress corrosion crack propagation of arc welded austenitic stainless steel

Haozheng J. Qu et al.

Summary: This study investigates the influence of crystallography on transgranular chloride-induced stress corrosion cracking (TGCISCC) in arc welded 304L austenitic stainless steel. The crack propagation can be explained by mechanical arguments, and the competition between mechanical, crystallographic, and corrosion factors is discussed in relation to crack behavior at grain boundaries.

NPJ MATERIALS DEGRADATION (2022)

添加到收藏夹

Article Engineering, Civil

Distributed fibre optic sensors in FRP composite bridge monitoring: Validation through proof load tests

Tomasz Siwowski et al.

Summary: The DFOS technique based on Rayleigh scattering was chosen for the first Polish FRP composite bridge as the basic SHM system, and its validation through proof load tests and FEA showed that it is accurate and reliable for monitoring FRP bridges. Additional strain measurement techniques were implemented to validate DFOS, and the comparison of measurement profiles with FEA results also supported the reliability and accuracy of the DFOS technique for FRP bridge monitoring.

ENGINEERING STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

Evaluating in-service structural behaviour of an operational railway bridge using fibre optic sensing and structural model updating

Cong Ye et al.

Summary: Multi-girder prestressed concrete bridges are commonly used around the world due to their advantages in construction speed, maintenance reduction, and material efficiency. However, the in-service behavior of these structures, including load distribution characteristics and support conditions, is not well understood. This study evaluates the structural behavior of an operational prestressed concrete railway bridge, using a dense network of fiber optic sensors to extract information on load distribution, support conditions, and secondary element stiffness. The proposed methodology and workflow provide insights into the real performance of these bridges, aiding in their operation, maintenance, assessment, and refurbishment.

ENGINEERING STRUCTURES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Real-time corrosion monitoring of aluminium alloys under chloride-contaminated atmospheric conditions

Erwan Diler et al.

Summary: The study assessed the use of electrical resistance (ER) sensors to monitor the corrosion of Al94Cu6 alloy, showing good reproducibility under various conditions. The ER method provides real-time corrosion data for understanding corrosion mechanisms and developing accelerated tests. Factors such as chloride concentration, salt application frequency, and wet/dry cycles significantly affect the corrosion rate of aluminum alloys.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2021)

添加到收藏夹

Article Engineering, Mechanical

Corrosion monitoring in steel bars using Laser ultrasonic guided waves and advanced signal processing

Subhra Majhi et al.

Summary: This paper presents an investigation using high power Laser ultrasonic guided waves combined with advanced signal processing to discern corrosion in structural steel bars, highlighting the pros and cons of Laser ultrasonic monitoring compared to traditional piezoelectric systems.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

添加到收藏夹

Review Construction & Building Technology

Review of fiber optic sensors for corrosion monitoring in reinforced concrete

Liang Fan et al.

Summary: Monitoring corrosion in reinforced concrete is crucial for assessing structural health, with various fiber optic sensors showing advantages in different conditions. However, the gap between sensor technology innovation and engineering practices hinders further development and widespread applications. This review covers types of fiber optic sensors, their sensing principles, key features, and discusses technical challenges and future research needs to advance sensor development and promote effective applications.

CEMENT & CONCRETE COMPOSITES (2021)

添加到收藏夹

Article Multidisciplinary Sciences

A multi-cantilever beam low-frequency FBG acceleration sensor

Li Hong et al.

Summary: This study addresses the issue of low sensitivity in FBG acceleration sensors for low-frequency vibration measurements by proposing a multi-cantilever beam low-frequency FBG acceleration sensor. The sensor, optimized through simulation analysis, exhibits high sensitivity and low transverse crosstalk, making it suitable for monitoring low-frequency vibration signals within the range of 16-54Hz. Performance tests show that the sensor has a sensitivity of approximately 87.955 pm/m s^(-2), with a linearity exceeding 99% and a transverse interference immunity below 2.58%.

SCIENTIFIC REPORTS (2021)

添加到收藏夹

Article Engineering, Mechanical

Predicting Corrosion rate in Chilled HVAC Pipe Network: Coupon vs Linear Polarisation Resistance method

Faisal Durrani et al.

ENGINEERING FAILURE ANALYSIS (2020)

添加到收藏夹

Article Construction & Building Technology

Investigation of novel embedded piezoelectric ultrasonic transducers on crack and corrosion monitoring of steel bar

Peng Liu et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Chemistry, Analytical

External Corrosion Detection of Oil Pipelines Using Fiber Optics

Nader Vahdati et al.

SENSORS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

The measurement of ultra low uniform corrosion rates

Nicholas A. Senior et al.

CORROSION SCIENCE (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

A rebar corrosion sensor embedded in concrete based on surface acoustic wave

Liqiang Xie et al.

MEASUREMENT (2020)

添加到收藏夹

Article Optics

Research on new FBG displacement sensor and its application in Beijing Daxing Airport project

Junlin Lv et al.

OPTIK (2019)

添加到收藏夹

Article Chemistry, Physical

Application of An Electrical Resistance Sensor-Based Automated Corrosion Monitor in the Study of Atmospheric Corrosion

Zhuolin Li et al.

MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

In-Situ Monitoring and Analysis of the Pitting Corrosion of Carbon Steel by Acoustic Emission

Junlei Tang et al.

APPLIED SCIENCES-BASEL (2019)

添加到收藏夹

Article Electrochemistry

Computational modeling of pitting corrosion

Siavash Jafarzadeh et al.

CORROSION REVIEWS (2019)

添加到收藏夹

Review Engineering, Mechanical

A review of underlying reasons for intergranular cracking for a variety of failure modes and materials and examples of case histories

Stan Lynch

ENGINEERING FAILURE ANALYSIS (2019)

添加到收藏夹

Review Chemistry, Analytical

Corrosion Sensors for Structural Health Monitoring of Oil and Natural Gas Infrastructure: A Review

Ruishu F. Wright et al.

SENSORS (2019)

添加到收藏夹

Article Construction & Building Technology

Characterization of stainless steel corrosion processes in mortar using various monitoring techniques

Miha Hren et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Engineering, Civil

Assessment of a steel model truss using distributed fibre optic strain sensing

Kyle Van der Kooi et al.

ENGINEERING STRUCTURES (2018)

添加到收藏夹

Article Chemistry, Analytical

Statistical Analysis of Stress Signals from Bridge Monitoring by FBG System

Xiao-Wei Ye et al.

SENSORS (2018)

添加到收藏夹

Article Chemistry, Analytical

A Fiber Bragg Grating-Based Anemometer

Chuan-Ying Huang et al.

SENSORS (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

Optical sensors for bond-slip characterization and monitoring of RC structures

Esequiel Mesquita et al.

SENSORS AND ACTUATORS A-PHYSICAL (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

Intensity and Wavelength Division Multiplexing FBG Sensor System Using a Raman Amplifier and Extreme Learning Machine

Yibeltal Chanie Manie et al.

JOURNAL OF SENSORS (2018)

添加到收藏夹

Article Engineering, Geological

Internal deformation monitoring for centrifuge slope model with embedded FBG arrays

Dan Zhang et al.

LANDSLIDES (2017)

添加到收藏夹

Review Chemistry, Analytical

Fiber Bragg Grating Sensors for the Oil Industry

Xueguang Qiao et al.

SENSORS (2017)

添加到收藏夹

Article Engineering, Electrical & Electronic

Monitoring Corrosion Process of Reinforced Concrete Structure Using FBG Strain Sensor

Omar Almubaied et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2017)

添加到收藏夹

Article Engineering, Electrical & Electronic

Groundwater level monitoring using a plastic optical fiber

Esequiel Mesquita et al.

SENSORS AND ACTUATORS A-PHYSICAL (2016)

添加到收藏夹

Article Chemistry, Analytical

Strain based FBG sensor for real-time corrosion rate monitoring in pre-stressed structures

Khalil Al Handawi et al.

SENSORS AND ACTUATORS B-CHEMICAL (2016)

添加到收藏夹

Article Engineering, Civil

Global overview on advances in structural health monitoring platforms

Esequiel Mesquita et al.

JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING (2016)

添加到收藏夹

Article Engineering, Electrical & Electronic

Novel Fiber-Optic Relative Humidity Sensor With Thermal Compensation

Branislav Korenko et al.

IEEE SENSORS JOURNAL (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

Experimental and finite element analyses on the corrosion of underground pipelines

Sun Li et al.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2015)

添加到收藏夹

Article Archaeology

Corrosion monitoring in archives by the electrical resistance technique

Milan Kouril et al.

JOURNAL OF CULTURAL HERITAGE (2014)

添加到收藏夹

Article Engineering, Electrical & Electronic

Design and experimental study on FBG hoop-strain sensor in pipeline monitoring

Liang Ren et al.

OPTICAL FIBER TECHNOLOGY (2014)

添加到收藏夹

Article Engineering, Civil

FBG based strain monitoring in the rehabilitation of a centenary metallic bridge

Carlos Rodrigues et al.

ENGINEERING STRUCTURES (2012)

添加到收藏夹

Article Engineering, Electrical & Electronic

Biaxial Optical Accelerometer and High-Angle Inclinometer With Temperature and Cross-Axis Insensitivity

Paulo Fernando Costa Antunes et al.

IEEE SENSORS JOURNAL (2012)

添加到收藏夹

Article Chemistry, Analytical

Optical-Based Sensors for Monitoring Corrosion of Reinforcement Rebar via an Etched Cladding Bragg Grating

Muhammad Rosdi Abu Hassan et al.

SENSORS (2012)

添加到收藏夹

Article Engineering, Civil

Development of a long-term monitoring system based on FBG sensors applied to concrete bridges

Carlos Rodrigues et al.

ENGINEERING STRUCTURES (2010)

添加到收藏夹

Article Engineering, Mechanical

CABLE TENSIONING CONTROL AND MODAL IDENTIFICATION OF A CIRCULAR CABLE-STAYED FOOTBRIDGE

C. Rebelo et al.

EXPERIMENTAL TECHNIQUES (2010)

添加到收藏夹

Article Engineering, Electrical & Electronic

UV Sensor Based on Photomechanically Functional Polymer-Coated FBG

Hyun-Kyoung Kim et al.

IEEE PHOTONICS TECHNOLOGY LETTERS (2010)

添加到收藏夹

Article Engineering, Multidisciplinary

A structural corrosion-monitoring sensor based on a pair of prestrained fiber Bragg gratings

Jung-Ryul Lee et al.

MEASUREMENT SCIENCE AND TECHNOLOGY (2010)

添加到收藏夹

Article Chemistry, Analytical

A novel optical fiber sensor for steel corrosion in concrete structures

Christopher K. Y. Leung et al.

SENSORS (2008)

添加到收藏夹

Article Engineering, Multidisciplinary

The use of radiography for thickness measurement and corrosion monitoring in pipes

K. Edalati et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.