Vision-Based Detection of Bolt Loosening Using YOLOv5

Bolted connections have been widely applied in engineering structures, loosening will happen when bolted connections are subjected to continuous cyclic load, and a significant rotation between the nut and the bolt can be observed. Combining deep learning with machine vision, a bolt loosening detection method based on the fifth version of You Only Look Once (YOLOv5) is proposed, and the rotation of the nut is identified to detect the bolt loosening. Two different circular markers are added to the bolt and the nut separately, and then YOLOv5 is used to identify the circular markers, and the rotation angle of the nut against the bolt is calculated according to the center coordinate of each predicted box. A bolted connection structure is adopted to illustrate the effectiveness of the method. First, 200 images containing bolts and circular markers are collected to make the dataset, which is divided into a training set, verification set and test set. Second, YOLOv5 is used to train the model; the precision rate and recall rate are respectively 99.8% and 100%. Finally, the robustness of the proposed method in different shooting environments is verified by changing the shooting distance, shooting angle and light condition. When using this method to detect the bolt loosening angle, the minimum identifiable angle is 1 degrees, and the maximum detection error is 5.91% when the camera is tilted 45 degrees. The experimental results show that the proposed method can detect the loosening angle of the bolted connection with high accuracy; especially, the tiny angle of bolt loosening can be identified. Even under some difficult shooting conditions, the method still works. The early stage of bolt loosening can be detected by measuring the rotation angle of the nut against the bolt.

Automated summary

A bolt loosening detection method based on YOLOv5 is proposed, achieving high accuracy and robustness in detecting the bolt loosening by identifying the rotation of the nut. The experimental results demonstrate the effectiveness of the method in detecting the loosening angle of the bolted connection, especially for tiny angles of loosening.