☆ 4.6 Article

A RUL Estimation System from Clustered Run-to-Failure Degradation Signals

SENSORS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Electrical & Electronic

Novel testability modelling and diagnosis method considering the supporting relation between faults and tests

Junyou Shi et al.

Summary: Establishing an effective testability model is crucial for testability design and fault diagnosis. Traditional methods, which assume reliable test circuits and accurate transmission of test signals, are not applicable to practical applications, leading to incorrect fault diagnosis results. To overcome these challenges, a novel extended testability modelling method considering the supporting relation between faults and tests is proposed.

MICROELECTRONICS RELIABILITY (2022)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Machine Learning-Based Monitoring of DC-DC Converters in Photovoltaic Applications

Marco Bindi et al.

Summary: This paper presents a monitoring method for DC-DC converters in photovoltaic applications, aiming to prevent catastrophic failures by detecting malfunctioning conditions. The method is based on machine learning techniques and focuses on the variations of passive components. A theoretical study is conducted to select the best measurements and consider the effects of solar irradiance. The main technique is a multilayer neural network classifier. Simulations show a classification rate higher than 90%, allowing the identification of problems in the initial phases for maintenance operations.

ALGORITHMS (2022)

添加到收藏夹

Article Acoustics

Acoustic signal-based fault detection of hydraulic piston pump using a particle swarm optimization enhancement CNN

Yong Zhu et al.

Summary: Hydraulic piston pumps are critical components in fluid power systems and their health status is crucial for the safety and reliability of mechanical equipment. This research introduces the particle swarm optimization algorithm to automatically select the hyperparameters of a diagnosis model and constructs a convolutional neural network model optimized by PSO. The proposed PSO-LeNet model, based on acoustic signals, identifies five common states of a hydraulic piston pump with high accuracy and stability compared to other CNN models.

APPLIED ACOUSTICS (2022)

添加到收藏夹

Article Engineering, Mechanical

CNN and Convolutional Autoencoder (CAE) based real-time sensor fault detection, localization, and correction

Debasish Jana et al.

Summary: This research introduces a novel deep learning framework for identifying faults in sensor data, locating the faulty sensors, and reconstructing the correct sensor data. The framework performs well in both single and multiple sensor faults and demonstrates high computational efficiency.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Article Engineering, Mechanical

A semi-supervised GAN method for RUL prediction using failure and suspension histories

Rui He et al.

Summary: This paper proposes a semi-supervised generative adversarial network (GAN) regression model for RUL predictions, considering both failure and suspension histories. The method can improve model generalization by matching statistical information for training, providing credibility in cases of scarce failure data.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Article Engineering, Industrial

Health status assessment and remaining useful life prediction of aero-engine based on BiGRU and MMoE

Yong Zhang et al.

Summary: Prognostics and health management (PHM) is crucial for ensuring the reliable operation of industrial equipment. This paper proposes a dual-task network structure that simultaneously evaluates the health status and predicts the remaining useful life of the equipment. The use of bidirectional gated recurrent unit and multigate mixture-of-experts enhances prediction accuracy and efficiency through information extraction and weighted decision making.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

添加到收藏夹

Article Computer Science, Information Systems

Testability Evaluation in Time-Variant Circuits: A New Graphical Method

Marco Bindi et al.

Summary: This paper investigates the approach of using testability analysis to build neural networks for fault diagnosis in DC-DC converters. The networks used are complex valued neural networks (CVNNs), which properly handle the phase and its information. Testability analysis is employed to effectively design the network and two methods considering the single-fault hypothesis are proposed. Theoretical foundations and practical examples are presented, and computer programs based on symbolic analysis techniques are used for analysis and training. The results obtained are highly satisfactory, demonstrating the optimal performance of the method.

ELECTRONICS (2022)

添加到收藏夹

Article Automation & Control Systems

Conditional Joint Distribution-Based Test Selection for Fault Detection and Isolation

Yang Li et al.

Summary: The article proposes a test selection method based on conditional joint distribution, utilizes a deep Copula function to describe the dependencies among tests, and introduces an improved discrete binary particle swarm optimization algorithm to handle the test selection problem. Application to an electrical circuit illustrates the efficiency of the proposed method over existing methods.

IEEE TRANSACTIONS ON CYBERNETICS (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Self-Adaptation Graph Attention Network via Meta-Learning for Machinery Fault Diagnosis With Few Labeled Data

Jianyu Long et al.

Summary: In this paper, a self-adaptation graph attention network via meta-learning (SGANM) is proposed for rapid recognition of new fault types with few labeled samples. Competitive performance is achieved by the proposed SGANM compared to other few-shot learning (FSL) algorithms, as demonstrated in experiments.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Convolutional Transformer: An Enhanced Attention Mechanism Architecture for Remaining Useful Life Estimation of Bearings

Yifei Ding et al.

Summary: This paper proposes a novel convolutional Transformer (CoT) method that combines the global context capturing of attention mechanism with the local dependencies modeling of convolutional operation to extract degradation-related information for bearing remaining useful life (RUL) estimation. The results of comprehensive case studies validate the effectiveness and advancements of the CoT-based RUL estimation method.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2022)

添加到收藏夹

Article Computer Science, Information Systems

Improving Prescriptive Maintenance by Incorporating Post-Prognostic Information Through Chance Constraints

Anthony D. Cho et al.

Summary: This paper presents a maintenance scheduling model that uses prognostic information to balance preventive costs and the effects of failures. By incorporating predictions and their errors into a stochastic optimization model, our approach reduces sparsity and minimizes maintenance costs.

IEEE ACCESS (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Data-Driven Optimal Test Selection Design for Fault Detection and Isolation Based on CCVKL Method and PSO

Yang Li et al.

Summary: This article proposes a data-driven method to address the ambiguity problem in fault detection and isolation, achieving optimal test design solution by constructing accurate test selection and constraint models.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2022)

添加到收藏夹

Article Engineering, Mechanical

Computation of time probability distributions for the occurrence of uncertain future events

David E. Acuna-Ureta et al.

Summary: This article explores the problem of determining the time at which future events may occur and characterizing the behavior of dynamic systems using stochastic processes. The focus is on computing the probability of uncertain future events by extending the concept of thresholds to uncertain events and hazard zones in discrete and continuous-time stochastic processes. Validation of the proposed framework is done by comparing with Monte Carlo simulations, with a specific application to fatigue crack growth prognosis.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

添加到收藏夹

Article Engineering, Industrial

Fault prediction of bearings based on LSTM and statistical process analysis

Junqiang Liu et al.

Summary: This paper proposes a novel model named LSS which combines LSTM network with statistical process analysis to predict the fault of aero-engine bearings with multi-stage performance degradation. The proposed method is validated on datasets from NASA and FEMTO-ST institute, showing higher prediction accuracy than other methods.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

添加到收藏夹

Article Chemistry, Analytical

Remaining Useful Life (RUL) Prediction of Equipment in Production Lines Using Artificial Neural Networks

Ziqiu Kang et al.

Summary: This study introduces a novel machine learning-based approach for automating the prediction of equipment failures in continuous production lines. The proposed model utilizes various techniques to preprocess data and employs neural network algorithm, demonstrating effectiveness in predicting the remaining useful life of turbo engines in a case study using NASA turbo engine datasets.

SENSORS (2021)

添加到收藏夹

Article Mathematical & Computational Biology

A Fault Prediction and Cause Identification Approach in Complex Industrial Processes Based on Deep Learning

Yao Li

Summary: This article proposes a fault diagnosis approach based on deep learning algorithm, which improves fault prediction accuracy by treating data as spatial sequences and utilizing attention mechanism algorithm. Experimental results demonstrate that the method achieves higher accuracy in fault diagnosis.

COMPUTATIONAL INTELLIGENCE AND NEUROSCIENCE (2021)

添加到收藏夹

Article Automation & Control Systems

A Risk-Averse Remaining Useful Life Estimation for Predictive Maintenance

Chuang Chen et al.

Summary: This work develops a risk-averse RUL estimation method by incorporating degradation feature selection, support vector regression, and long short-term memory network, which successfully reduces the over-estimation rate while maintaining a reasonable under-estimation level to enhance prediction robustness and marginal utility. The proposed method shows feasibility and effectiveness in predictive maintenance based on verification using an aero-engine dataset from NASA.

IEEE-CAA JOURNAL OF AUTOMATICA SINICA (2021)

添加到收藏夹

Review Computer Science, Artificial Intelligence

A review on fault detection and diagnosis techniques: basics and beyond

Anam Abid et al.

Summary: This paper discusses the importance of fault detection and diagnosis methods in modern systems, reviewing both traditional model-based and signal processing-based FDD approaches, as well as AI-based methods. Additionally, typical steps involved in the design and development of automatic FDD systems are systematically presented to outline the present status of FDD.

ARTIFICIAL INTELLIGENCE REVIEW (2021)

添加到收藏夹

Article Automation & Control Systems

Fault prognostics by an ensemble of Echo State Networks in presence of event based measurements

Mingjing Xu et al.

ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (2020)

添加到收藏夹

Article Engineering, Mechanical

A method for the reduction of the computational cost associated with the implementation of particle-filter-based failure prognostic algorithms

Heraldo Rozas et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

添加到收藏夹

Review Computer Science, Artificial Intelligence

A review on the long short-term memory model

Greg Van Houdt et al.

ARTIFICIAL INTELLIGENCE REVIEW (2020)

添加到收藏夹

Article Engineering, Industrial

Towards multi-model approaches to predictive maintenance: A systematic literature survey on diagnostics and prognostics

Juan Jose Montero Jimenez et al.

JOURNAL OF MANUFACTURING SYSTEMS (2020)

添加到收藏夹

Article Engineering, Industrial

Integrated Stateflow-based simulation modelling and testability evaluation for electronic built-in-test (BIT) systems

Junyou Shi et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)

添加到收藏夹

Review Engineering, Chemical

A Review on Fault Detection and Process Diagnostics in Industrial Processes

You-Jin Park et al.

PROCESSES (2020)

添加到收藏夹

Review Engineering, Multidisciplinary

A Review of Post-Prognostics Decision-Making in Prognostics and Health Management

Omar Bougacha et al.

INTERNATIONAL JOURNAL OF PROGNOSTICS AND HEALTH MANAGEMENT (2020)

添加到收藏夹

Proceedings Paper Engineering, Electrical & Electronic

Data-driven Prognostics for PEMFC Systems by Different Echo State Network Prediction Structures

Zhiguang Hua et al.

2020 IEEE TRANSPORTATION ELECTRIFICATION CONFERENCE & EXPO (ITEC) (2020)

添加到收藏夹

Article Computer Science, Information Systems

Slow Degradation Fault Detection in a Harsh Environment

Anthony D. Cho et al.

IEEE ACCESS (2020)

添加到收藏夹

Article Computer Science, Artificial Intelligence

A hybrid intelligent approach for constructing landslide displacement prediction intervals

Yankun Wang et al.

APPLIED SOFT COMPUTING (2019)

添加到收藏夹

Proceedings Paper Computer Science, Artificial Intelligence

Attention Based Echo State Network: A Novel Approach for Fault Prognosis

Chongdang Liu et al.

ICMLC 2019: 2019 11TH INTERNATIONAL CONFERENCE ON MACHINE LEARNING AND COMPUTING (2019)

添加到收藏夹

Article Chemistry, Analytical

Multiband Envelope Spectra Extraction for Fault Diagnosis of Rolling Element Bearings

Jie Duan et al.

SENSORS (2018)

添加到收藏夹

Article Statistics & Probability

Forecasting at Scale

Sean J. Taylor et al.

AMERICAN STATISTICIAN (2018)

添加到收藏夹

Proceedings Paper Engineering, Aerospace

ALMA engineering fault detection framework

Jose L. Ortiz et al.

OBSERVATORY OPERATIONS: STRATEGIES, PROCESSES, AND SYSTEMS VII (2018)

添加到收藏夹

Article Automation & Control Systems

Direct Remaining Useful Life Estimation Based on Support Vector Regression

Racha Khelif et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2017)

添加到收藏夹

Article Computer Science, Artificial Intelligence

LSTM: A Search Space Odyssey

Klaus Greff et al.

IEEE TRANSACTIONS ON NEURAL NETWORKS AND LEARNING SYSTEMS (2017)

添加到收藏夹

Proceedings Paper Automation & Control Systems

Echo State Network & Particle Swarm Optimization for prognostics of a complex system

Safa Ben Salah et al.

2017 IEEE/ACS 14TH INTERNATIONAL CONFERENCE ON COMPUTER SYSTEMS AND APPLICATIONS (AICCSA) (2017)

添加到收藏夹

Proceedings Paper Engineering, Marine

A review of fatigue crack propagation modelling techniques using FEM and XFEM

K. Rege et al.

FIRST CONFERENCE OF COMPUTATIONAL METHODS IN OFFSHORE TECHNOLOGY (COTECH2017) (2017)

添加到收藏夹

Proceedings Paper Astronomy & Astrophysics

Model-based fault detection and diagnosis in ALMA subsystems

Jose Ortiz et al.

OBSERVATORY OPERATIONS: STRATEGIES, PROCESSES, AND SYSTEMS VI (2016)

添加到收藏夹

Article Engineering, Electrical & Electronic

Reducing arbitrary choices in model building for prognostics: An approach by applying parsimony principle on an evolving neuro-fuzzy system

Mohamed El-Koujok et al.

MICROELECTRONICS RELIABILITY (2011)

添加到收藏夹

Article Robotics

Fault detection and isolation in cooperative mobile robots using multilayer architecture and dynamic observers

R. A. Carrasco et al.

ROBOTICA (2011)

添加到收藏夹

Article Engineering, Mechanical

Signal Model-Based Fault Detection and Diagnosis for Induction Motors Using Features of Vibration Signal in Two-Dimension Domain

Van Tuan Do et al.

STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING (2011)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Matching incomplete time series with dynamic time warping: an algorithm and an application to post-stroke rehabilitation

Paolo Tormene et al.

ARTIFICIAL INTELLIGENCE IN MEDICINE (2009)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Computing and Visualizing Dynamic Time Warping Alignments in R: The dtw Package

Toni Giorgino

JOURNAL OF STATISTICAL SOFTWARE (2009)

添加到收藏夹

Article Engineering, Mechanical

Monte Carlo-based filtering for fatigue crack growth estimation

F. Cadini et al.

PROBABILISTIC ENGINEERING MECHANICS (2009)

添加到收藏夹

Article Computer Science, Information Systems

Reservoir computing approaches to recurrent neural network training

Mantas Lukosevicius et al.

COMPUTER SCIENCE REVIEW (2009)

添加到收藏夹

Article Computer Science, Artificial Intelligence

An elastic partial shape matching technique

Longin Jan Latecki et al.

PATTERN RECOGNITION (2007)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Optimization and applications of echo state networks with leaky-integrator neurons

Herbert Jaegera et al.

NEURAL NETWORKS (2007)

添加到收藏夹

Article Automation & Control Systems

Hierarchical motor diagnosis utilizing structural knowledge and a self-learning neuro-fuzzy scheme

D Fuessel et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.