☆ 4.7 Article

In-situ oxide particles reinforced Fe40Mn40Co10Cr10 high-entropy alloy by internal oxidation and powder forging

SCRIPTA MATERIALIA (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Nanoscience & Nanotechnology

High-temperature mechanical properties of FeCoCrNi high-entropy alloys fabricated via selective laser melting

Danyang Lin et al.

Summary: This study investigated the tensile properties of FeCoCrNi HEAs under various temperatures and strain rates, revealing a significant decrease in tensile strength at high temperatures and establishing a structure-mechanism-property relationship. The parameters of a constitutive model were calculated to predict flow behavior at elevated temperatures, providing insights for the development and improvement of SLM-HEAs for high-temperature applications.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preliminary study on the fabrication of 14Cr-ODS FeCrAl alloy by powder forging

Sajian Wu et al.

Summary: This study introduces a simple powder forging process to fabricate a high-density and high-strength ODS FeCrAl alloy, which exhibits excellent mechanical properties and shows outstanding toughness and ductility below 700 degrees Celsius. The low residual porosity and orthorhombic YAlO3 oxide nanoparticles contribute to the superior performance of the alloy.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

The high temperature mechanical properties and the correlated microstructure/texture evolutions of a TWIP high entropy alloy

A. Nabizada et al.

Summary: This study investigates the microstructure and texture evolutions of a TWIP-type high entropy alloy at various deformation temperatures, revealing extraordinary work hardening behavior at room temperature. The alloy's work hardening capacity deteriorated at higher temperatures due to increased dislocation annihilation rate and stacking fault energy values, but its ability for dislocation storage remained high compared to other single-phase high entropy alloys. Serrated flow was observed at 773 and 873K due to the dynamic strain aging mechanism, which surprisingly had a beneficial effect on overall ductility.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Mechanical behavior of high-entropy alloys

Weidong Li et al.

Summary: Research in high-entropy alloys has been booming since the 2010s, focusing on the vast potential in compositions, microstructures, and properties. Efforts are mainly directed towards exploring the compositional space and microstructures, as well as understanding the mechanical behavior. However, there is still a lack of comprehensive studies on the mechanical behavior of high-entropy alloys.

PROGRESS IN MATERIALS SCIENCE (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Simultaneously enhanced strength and strain hardening capacity in FeMnCoCr high-entropy alloy via harmonic structure design

Guodong Li et al.

Summary: The harmonic structure design of high-entropy alloy samples with tunable shell fractions showed enhanced strength and ductility synergy, particularly when the shell fraction was around 70%. These samples were successfully prepared via controlled mechanical milling and subsequent sintering.

SCRIPTA MATERIALIA (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Improving high-temperature mechanical properties of cast CrFeCoNi high-entropy alloy by highly thermostable in-situ precipitated carbides

X. W. Liu et al.

Summary: In this study, significant high-temperature strengthening of cast CrFeCoNi HEA was achieved by in-situ precipitation of highly thermostable carbides, addressing the insufficient medium- and high-temperature strengths. The high thermostability of the microstructure, formed by the synergy of lacking growth driving force and Zenner pinning effect by carbides, contributes to the improved mechanical properties at elevated temperatures. The strengthening effect is mainly attributed to the precipitation hardening of carbide particles, leading to increased yield strength and ultimate tensile strength with enhanced elongation at higher temperatures.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

The effects of Y pre-alloying on the in-situ dispersoids of ODS CoCrFeMnNi high-entropy alloy

SeungHyeok Chung et al.

Summary: This study investigates the effects of in-situ and ex-situ oxide dispersoid formation in oxide dispersion strengthened high-entropy alloys using two different powder preparation methods classified by yttrium addition strategy. The in-situ dispersoid formation was observed dominantly in the Y-alloyed ODS-HEA, leading to an increase in Zener pinning forces on grain boundary movement. The presence of in-situ oxide dispersoids enhanced the formation of ultrafine-grained structures, resulting in an enhancement of tensile strength in the CoCrFeMnNi HEA.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Temperature dependent deformation behavior and stacking fault energy of Fe40Mn40Co10Cr10 alloy

A. K. Chandan et al.

Summary: The variation of stacking fault energy (SFE) with temperature in Fe40Mn40Co10Cr10 high entropy alloy was experimentally evaluated, showing a transition in deformation behavior from limited twin formation and slip dominance at room temperature to mixed-mode consisting of FCC -> HCP transformation and twinning at -100 degrees C. The simultaneous occurrence of twins and deformation-induced martensitic transformation at -100 degrees C led to superior strength-ductility combination in the specimen. The increase in SFE at room temperature, despite the removal of Ni, can be understood by considering the effect of alloy chemistry re-adjustment on Delta G(gamma ->epsilon).

SCRIPTA MATERIALIA (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

High-strength and high-ductility AlCoCrFeNi2.1 eutectic high-entropy alloy achieved via precipitation strengthening in a heterogeneous structure

Ting Xiong et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of sintering temperature on microstructural and mechanical properties of SPS processed CoCrCuFeNi based ODS high entropy alloy

K. Raja Rao et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Hot powder forging behavior analysis of sintered AISI 8740 PM steels for automotive application

L. Arulmani et al.

MATERIALS TODAY-PROCEEDINGS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Strengthening of Al0.3CoCrFeMnNi-based ODS high entropy alloys with incremental changes in the concentration of Y2O3

Bharat Gwalani et al.

SCRIPTA MATERIALIA (2019)

添加到收藏夹

Article Chemistry, Physical

Revealing the Hall-Petch relationship of Al0.1CoCrFeNi high-entropy alloy and its deformation mechanisms

J. Yang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Development of a large size FCC high-entropy alloy with excellent mechanical properties

K. Tang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Anomalous work hardening behavior of Fe40Mn40Cr10Co10 high entropy alloy single crystals deformed by twinning and slip

S. Picak et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of grain size on the tensile behavior of V10Cr15Mn5Fe35Co10Ni25 high entropy alloy

Peyman Asghari-Rad et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Recrystallized microstructures and mechanical properties of a C-containing CoCrFeNiMn-type high-entropy alloy

M. V. Klimova et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Multiscale investigations of nanoprecipitate nucleation, growth, and coarsening in annealed low-Cr oxide dispersion strengthened FeCrAl powder

Caleb P. Massey et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Boron doped ultrastrong and ductile high-entropy alloys

Jae Bok Seol et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the first direct observation of de-twinning in a twinning-induced plasticity steel

Scott J. McCormack et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Heavy carbon alloyed FCC-structured high entropy alloy with excellent combination of strength and ductility

L. B. Chen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Transition of twinning behavior in CoCrFeMnNi high entropy alloy with grain refinement

S. J. Sun et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

High-Entropy Alloys: Potential Candidates for High-Temperature Applications - An Overview

Sathiyamoorthi Praveen et al.

ADVANCED ENGINEERING MATERIALS (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

Recent Progress in High Entropy Alloy Research

B. E. Macdonald et al.

JOM (2017)

添加到收藏夹

Article Chemistry, Physical

Effect of SiC nano-particles on microstructure and mechanical properties of the CoCrFeMnNi high entropy alloy

Lukasz Rogal et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure characterization and strengthening mechanisms of oxide dispersion strengthened (ODS) Fe-9% Cr and Fe-14% Cr extruded bars

A. Chauhan et al.

JOURNAL OF NUCLEAR MATERIALS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Oxide dispersion strengthened CoCrFeNiMn high-entropy alloy

Hynek Hadraba et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Interstitial atoms enable joint twinning and transformation induced plasticity in strong and ductile high-entropy alloys

Zhiming Li et al.

SCIENTIFIC REPORTS (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Enhanced strength and ductility in a friction stir processing engineered dual phase high entropy alloy

S. S. Nene et al.

SCIENTIFIC REPORTS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

The effect of carbon on the microstructures, mechanical properties, and deformation mechanisms of thermo-mechanically treated Fe40.4Ni11.3Mn34.8Al17.5Cr6 high entropy alloys

Zhangwei Wang et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

The effect of interstitial carbon on the mechanical properties and dislocation substructure evolution in Fe40.4Ni11.3Mn34.8Al7.5Cr6 high entropy alloys

Zhangwei Wang et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

A precipitation-hardened high-entropy alloy with outstanding tensile properties

J. Y. He et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ultrafine-Grained AlCoCrFeNi2.1 Eutectic High-Entropy Alloy

I. S. Wani et al.

MATERIALS RESEARCH LETTERS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Design of a twinning-induced plasticity high entropy alloy

Y. Deng et al.

ACTA MATERIALIA (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Tensile properties of low-stacking fault energy high-entropy alloys

A. J. Zaddach et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility

Xiaolei Wu et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

A novel, single phase, non-equiatomic FeMnNiCoCr high-entropy alloy with exceptional phase stability and tensile ductility

M. J. Yao et al.

SCRIPTA MATERIALIA (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy

F. Otto et al.

ACTA MATERIALIA (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys

K. -Y. Tsai et al.

ACTA MATERIALIA (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study of the deformation mechanisms in a Fe-14% Cr ODS alloy

M. Praud et al.

JOURNAL OF NUCLEAR MATERIALS (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Tensile properties of an AlCrCuNiFeCo high-entropy alloy in as-cast and wrought conditions

A. V. Kuznetsov et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strength

Z Zhang et al.

SCRIPTA MATERIALIA (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.