相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Can hydro-thermo-mechanical treatment by instant controlled pressure-drop (DIC) be used as short time roasting process? Effect of processing parameters on sensory, physical, functional, and color attributes of Egyptian carob powder
Sabah Mounir et al.
JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE (2021)
Lactose-free skim milk and prebiotics as carrier agents of Bifidobacterium BB-12 microencapsulation: physicochemical properties, survival during storage and in vitro gastrointestinal condition behaviour
Adriana Dantas et al.
INTERNATIONAL JOURNAL OF FOOD SCIENCE AND TECHNOLOGY (2021)
Sugar beet powder production using different drying methods, characterization and influence on sensory quality of cocoa-hazelnut cream
Ertan Ermis et al.
JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE (2021)
Chemical and sensorial characterization of spray driedhydroSOStainablealmond milk
Leontina Lipan et al.
JOURNAL OF THE SCIENCE OF FOOD AND AGRICULTURE (2021)
Micro wet milling and spray drying of whole mandarin powder and its characterization
Md Zohurul Islam et al.
JOURNAL OF FOOD MEASUREMENT AND CHARACTERIZATION (2021)
Influence of sucrose reduction and starch type on bulk and powder properties of ready-to-use powdered dessert
Duygu Aslan Turker et al.
EUROPEAN FOOD RESEARCH AND TECHNOLOGY (2021)
Wettability improvement of pea protein isolate agglomerated in pulsed fluid bed
Raul Favaro Nascimento et al.
PARTICULATE SCIENCE AND TECHNOLOGY (2020)
Microencapsulation in foam spray drying
Artur Lewandowski et al.
DRYING TECHNOLOGY (2020)
A moment-based kinetic theory model for polydisperse gas-particle flows
Bo Kong et al.
POWDER TECHNOLOGY (2020)
Coating particles using liquids and foams based on viscous formulations with industrial mixers: Batch operation
D. Kontziampasis et al.
PARTICUOLOGY (2020)
Prediction of particle size and layer-thickness distributions in a continuous horizontal fluidized-bed coating process
P. Bachmann et al.
PARTICUOLOGY (2020)
Functional characteristics and microbiological viability of foam-mat dried Bambara groundnut (Vigna subterranea) yogurt from reconstituted Bambara groundnut milk powder
Zolelwa Hardy et al.
FOOD SCIENCE & NUTRITION (2020)
The control of paracetamol particle size and surface morphology through crystallisation in a spray dryer
Alan F. McDonagh et al.
ADVANCED POWDER TECHNOLOGY (2020)
A second-order realizable scheme for moment advection on unstructured grids
Alberto Passalacqua et al.
COMPUTER PHYSICS COMMUNICATIONS (2020)
Encapsulation of Pomegranate Seed Oil by Emulsification Followed by Spray Drying: Evaluation of Different Biopolymers and Their Effect on Particle Properties
Talita A. Comunian et al.
FOOD AND BIOPROCESS TECHNOLOGY (2020)
Mechanistic modelling of fluid bed granulation, Part I: Agglomeration in pilot scale process
Maryam Askarishahi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Effects of morphology on the dispersibility of instant whole milk powder
Haohan Ding et al.
JOURNAL OF FOOD ENGINEERING (2020)
Application of pulsed spray and moisture content control strategies on quality consistency control in fluidized bed granulation: A comparative study
Geng Tian et al.
POWDER TECHNOLOGY (2020)
Development and verification of a novel design space and improved scale-up procedure for fluid bed granulation using a mechanistic model
Ian C. Kemp et al.
POWDER TECHNOLOGY (2020)
Original Research Paper Selection function in breakage processes: PBM and Monte Carlo modeling
Ashok Das et al.
ADVANCED POWDER TECHNOLOGY (2020)
Estimation of the dominant size enlargement mechanism in spray fluidized bed processes
Christian Rieck et al.
AICHE JOURNAL (2020)
Investigation on agglomeration kinetics of acetaminophen using fluidized bed wet granulation
Suresh Pathi et al.
ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING (2020)
GPU-accelerated simulation of polydisperse multiphase flows using dual-quadrature-based moment methods
Fabio P. Santos et al.
CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2020)
Prebiotic carbohydrates: Effect on physicochemical stability and solubility of algal oil nanoparticles
Yue Wang et al.
CARBOHYDRATE POLYMERS (2020)
A CFD-PBM-EMMS integrated model applicable for heterogeneous gas-solid flow
Shanwei Hu et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Distribution characteristics of salt-out particles in steam turbine stage
Pengfei Hu et al.
ENERGY (2020)
Effect of Calcium and Phosphorus on Interactions between Quartz Sand and K-Salt-Doped Wood under Both Steam Gasification and Combustion Atmospheres
Zimeng He et al.
ENERGY & FUELS (2020)
Encapsulation of Oils Recovered from brewer's Spent Grain by Particles from Gas Saturated Solutions Technique
John Ndayishimiye et al.
FOOD AND BIOPROCESS TECHNOLOGY (2020)
The ash-quartz sand interaction behaviours during steam gasification or combustion of a freshwater and a marine species of macroalgae
Zimeng He et al.
FUEL (2020)
Effects of spraying surfactants in a fluidised bed on the rehydration behaviour of milk protein isolate powder
Shaozong Wu et al.
JOURNAL OF FOOD ENGINEERING (2020)
Effect of microwave treatment on preparation of stable PUFA enriched vegetable oil powder and its influence on quality parameters
Monalisha Pattnaik et al.
JOURNAL OF FOOD PROCESSING AND PRESERVATION (2020)
Microencapsulation of Bacillus megaterium NCT-2 and its effect on remediation of secondary salinization soil
Yaowei Chi et al.
JOURNAL OF MICROENCAPSULATION (2020)
Reformulation of spray-dried apple concentrate and honey for the enhancement of drying process performance and the physicochemical properties of powders
Katarzyna Samborska et al.
JOURNAL OF THE SCIENCE OF FOOD AND AGRICULTURE (2020)
Production of Hematite Micro- and Nanoparticles in a Fluidized Bed Process-Mechanism Study
Nadine Le Bolay et al.
KONA POWDER AND PARTICLE JOURNAL (2020)
Production of phenolic enriched mushroom powder as affected by impregnation method and air drying temperature
Fatih Mehmet Yilmaz et al.
LWT-FOOD SCIENCE AND TECHNOLOGY (2020)
Influence of process variables on spray agglomeration process in a continuously operated horizontal fluidized bed
J. Du et al.
POWDER TECHNOLOGY (2020)
Agglomerated xanthan gum powder used as a food thickener: Effect of sugar binders on physical, microstructural, and rheological properties
Hyundo Lee et al.
POWDER TECHNOLOGY (2020)
Enhancing the collection efficiency of a gas cyclone with atomization and electrostatic charging
Bo Wang et al.
POWDER TECHNOLOGY (2020)
Microencapsulation of sour cherry oil by spray drying: Evaluation of physical morphology, thermal properties, storage stability, and antimicrobial activity
Bulent Basyigit et al.
POWDER TECHNOLOGY (2020)
In-line particle size measurement and process influences on rotary fluidized bed agglomeration
Marcel Langner et al.
POWDER TECHNOLOGY (2020)
Use of a Taguchi Design in Hibiscus sabdariffa Extracts Encapsulated by Spray-Drying
Migdalia Sarahy Navidad-Murrieta et al.
FOODS (2020)
Enhanced collection of fine particles in a cyclone using ultrasonic vapor with surfactants
Chenwen Wang et al.
ADVANCED POWDER TECHNOLOGY (2020)
CFD modeling of an industrial scale two-fluid nozzle fluidized bed granulator
A. Tabeei et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2020)
An overview of microencapsulation in the food industry: opportunities, challenges, and innovations
Marta Arenas-Jal et al.
EUROPEAN FOOD RESEARCH AND TECHNOLOGY (2020)
Agglomeration tendency of a fluidized bed during addition of different phosphate compounds
Christoffer Sevonius et al.
FUEL (2020)
Quantification of Solid Mixing in Bubbling Fluidized Beds via Two-Fluid Model Simulations
Mohammad-Sadegh Salehi et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)
Structural and functional properties of raw and defatted flaxseed flour and degradation of cynogenic contents using different processing methods
Bushra Safdar et al.
JOURNAL OF FOOD PROCESS ENGINEERING (2020)
Acacia gum fluidized bed agglomeration: Use of inulin as a binder and process parameters analysis
Juliana G. Rosa et al.
JOURNAL OF FOOD PROCESS ENGINEERING (2020)
The effect of different drying techniques and microwave finish drying on the powder properties of the red pepper powder (Capsicum annuum L.)
Gulsah Caliskan Koc
JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE (2020)
Numerical Methods for the Solution of Population Balance Equations Coupled with Computational Fluid Dynamics
Mohsen Shiea et al.
ANNUAL REVIEW OF CHEMICAL AND BIOMOLECULAR ENGINEERING, VOL 11 (2020)
Approximate Moment Methods for Population Balance Equations in Particulate and Bioengineering Processes
Robert Duerr et al.
PROCESSES (2020)
Effect of Reconstituted Broth on the Taste-Active Metabolites and Sensory Quality of Stewed and Roasted Pork-Hock
Yi Yang et al.
FOODS (2020)
Microencapsulation of Pineapple Peel Extract by Spray Drying Using Maltodextrin, Inulin, and Arabic Gum as Wall Matrices
Sofia C. Lourenco et al.
FOODS (2020)
A protein powder agglomeration process using acai pulp as the binder: An analysis of the process parameters
Giovanna Rodrigues Custodio et al.
ADVANCED POWDER TECHNOLOGY (2020)
Textural and sensorial characteristics of set-type yogurt containingBifidobacterium animalissubsp.lactisBb-12 and quince powder
Senay Burak Cinar et al.
JOURNAL OF FOOD MEASUREMENT AND CHARACTERIZATION (2020)
Particle agglomeration of gum mixture thickeners used for dysphagia diets
Jeachun Park et al.
JOURNAL OF FOOD ENGINEERING (2020)
Modelling of urea aggregation efficiency via particle tracking velocimetry in fluidized bed granulation
Ehsan Zhalehrajabi et al.
CHEMICAL ENGINEERING SCIENCE (2020)
Application of the agglomeration process on spinach juice powders obtained using spray drying method
Hira Yuksel et al.
DRYING TECHNOLOGY (2020)
Particle engineering for improved stability and handling properties of carrot concentrate powders using fluidized bed granulation and agglomeration
Klara Haas et al.
POWDER TECHNOLOGY (2020)
Conversion of indomethacin nanosuspensions into solid dosage forms via fluid bed granulation and compaction
F. Sahnen et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2020)
Maillard conjugates from spent brewer's yeast by-product as an innovative encapsulating material
Gabriela Vollet Marson et al.
FOOD RESEARCH INTERNATIONAL (2020)
A review of regime maps for granulation
Sebastian Pohl et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Influence of operating parameters on process behavior and product quality in continuous spray fluidized bed agglomeration
G. Strenzke et al.
POWDER TECHNOLOGY (2020)
Fabrication of Spray-Dried Microcapsules Containing Noni Juice Using Blends of Maltodextrin and Gum Acacia: Physicochemical Properties of Powders and Bioaccessibility of Bioactives during In Vitro Digestion
Chuang Zhang et al.
FOODS (2020)
Cross-linking of double oil-in-water-in-oil emulsions: A new way for fragrance encapsulation with tunable sustained release
Margot Stasse et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)
In vitro bioaccessibility of isoflavones from a soymilk-based beverage as affected by thermal and non-thermal processing
Maria Janeth Rodriguez-Roque et al.
INNOVATIVE FOOD SCIENCE & EMERGING TECHNOLOGIES (2020)
Some physical properties and adsorption isotherms of vacuum-dried honey powder with different carrier materials
Ceren Mutlu et al.
LWT-FOOD SCIENCE AND TECHNOLOGY (2020)
Development of phytonutrient enriched avocado milkshake powder and its quality evaluation
Shreya Pandey et al.
INDIAN JOURNAL OF DAIRY SCIENCE (2020)
QBMMlib: A library of quadrature-based moment methods
Spencer H. Bryngelson et al.
SOFTWAREX (2020)
Agglomeration and the effect of process conditions on fluidized bed combustion of biomasses with olivine and silica sand as bed materials: Pilot-scale investigation
Jonathan D. Morris et al.
BIOMASS & BIOENERGY (2020)
Microencapsulation of copigmented anthocyanins using double emulsion followed by complex coacervation: Preparation, characterization and stability
Nattapong Kanha et al.
LWT-FOOD SCIENCE AND TECHNOLOGY (2020)
Dataset on applying HPMC polymer to improve encapsulation efficiency and stability of the fish oil: In vitro evaluation
I. S. M. Zaidul et al.
DATA IN BRIEF (2020)
Particle size of ginseng (Panax ginseng Meyer) insoluble dietary fiber and its effect on physicochemical properties and antioxidant activities
Guihun Jiang et al.
APPLIED BIOLOGICAL CHEMISTRY (2020)
Influence of Flowability of Ceramic Tile Granule Powders on Sintering Behavior of Relief Ceramic Tile
Cheol Shin et al.
KOREAN JOURNAL OF MATERIALS RESEARCH (2020)
Mathematical Modeling of the Dynamics of Inertial Polydisperse Particles in a Vortex Flow
A. K. Gilfanov et al.
UCHENYE ZAPISKI KAZANSKOGO UNIVERSITETA-SERIYA FIZIKO-MATEMATICHESKIE NAUKI (2020)
Preparation and characterisation of a novel emulsifier system based on glycerol monooleate by spray-drying
Chia Chun Loi et al.
JOURNAL OF FOOD ENGINEERING (2020)
The effect of wall formulation on storage stability and physicochemical properties of cinnamon essential oil microencapsulated by spray drying
Mostafa Shahidi Noghabi et al.
CHEMICAL PAPERS (2020)
Antioxidant Nano Phlorotannin Powder from Brown Algae Sargassum serratum: Spray Drying, Antioxidant Activities, Physic-Chemical Characterization
Dang Xuan Cuong
JOURNAL OF PHARMACEUTICAL RESEARCH INTERNATIONAL (2020)
Effects of encapsulated green coffee extract and canola oil on liquid kashk quality
Elnaz Rahpeyma et al.
FOODS AND RAW MATERIALS (2020)
Application of chemical equilibrium calculations for the prediction of ash-induced agglomeration
Bernhard Gatternig et al.
BIOMASS CONVERSION AND BIOREFINERY (2019)
Impact of sodium salts on agglomeration in a laboratory fluidized bed
Christoffer Sevonius et al.
FUEL (2019)
Defluidization Prediction and Prevention during Cocombustion of ReEngineered Feedstock with Coal in a Bubbling Fluidized Bed Combustor
Jaber Shabanian et al.
ENERGY & FUELS (2019)
Ash-Bed Material Interaction during the Combustion and Steam Gasification of Australian Agricultural Residues
Zimeng He et al.
ENERGY & FUELS (2018)
Mechanisms and mitigation of agglomeration during fluidized bed combustion of biomass: A review
Jonathan D. Morris et al.
FUEL (2018)
Mn-based oxygen carriers prepared by impregnation for Chemical Looping Combustion with diverse fuels
T. R. Costa et al.
FUEL PROCESSING TECHNOLOGY (2018)
Particle agglomeration during fluidized bed combustion: Mechanisms, early detection and possible countermeasures
Fabrizio Scala
FUEL PROCESSING TECHNOLOGY (2018)
Co-firing of oil palm residues in a fuel staged fluidized-bed combustor using mixtures of alumina and silica sand as the bed material
Vladimir Kuprianov et al.
APPLIED THERMAL ENGINEERING (2018)
Time-Dependent Crack Layer Formation in Quartz Bed Particles during Fluidized Bed Combustion of Woody Biomass
Hanbing He et al.
ENERGY & FUELS (2017)
Time-Dependent Layer Formation on K-Feldspar Bed Particles during Fluidized Bed Combustion of Woody Fuels
Hanbing He et al.
ENERGY & FUELS (2017)
Enhanced wetting behaviours of whey protein isolate powder: The different effects of lecithin addition by fluidised bed agglomeration and coating processes
Junfu Ji et al.
FOOD HYDROCOLLOIDS (2017)
Experimental Study and Thermodynamic Modelling of High Temperature Interactions Between Molten Miscanthus Ashes and Bed Particles in Fluidized Bed Reactors
J. Kaknics et al.
WASTE AND BIOMASS VALORIZATION (2017)
Comparative Analysis of the Physical and Chemical Properties of Different Biomass Ashes Produced from Various Combustion Conditions
Xiwen Yao et al.
BIORESOURCES (2017)
Effects of temperature, pressure, and interparticle forces on the hydrodynamics of a gas-solid fluidized bed
Jaber Shabanian et al.
CHEMICAL ENGINEERING JOURNAL (2017)
A study on combustion of oil palm empty fruit bunch in a fluidized bed using alternative bed materials: Performance, emissions, and time-domain changes in the bed condition
Pichet Ninduangdee et al.
APPLIED ENERGY (2016)
Defluidization in fluidized bed gasifiers using high-alkali content fuels
Vikas Narayan et al.
BIOMASS & BIOENERGY (2016)
The mechanism of agglomeration of the refractory materials in a fluidized-bed reactor
Rudy Michel et al.
CERAMICS INTERNATIONAL (2016)
Fluidization characteristics of a bubbling gas-solid fluidized bed at high temperature in the presence of interparticle forces
Jaber Shabanian et al.
CHEMICAL ENGINEERING JOURNAL (2016)
Gas and Bed Axial Composition in a Bubbling Fluidized Bed Gasifier: Results with Miscanthus and Olivine
George Lardier et al.
ENERGY & FUELS (2016)
Biomass-Ash-Induced Agglomeration in a Fluidized Bed. Part 1: Experimental Study on the Effects of a Gas Atmosphere
Teng Ma et al.
ENERGY & FUELS (2016)
Mechanism of Layer Formation on Olivine Bed Particles in Industrial-Scale Dual Fluid Bed Gasification of Wood
Matthias Kuba et al.
ENERGY & FUELS (2016)
Control of Agglomeration during Circulating Fluidized Bed Gasification of a South Australian Low-Rank Coal: Pilot Scale Testing
Philip J. van Eyk et al.
ENERGY & FUELS (2016)
Mechanism of Quartz Bed Particle Layer Formation in Fluidized Bed Combustion of Wood-Derived Fuels
Hanbing He et al.
ENERGY & FUELS (2016)
Miscanthus ash transformation and interaction with bed materials at high temperature
Judit Kaknics et al.
FUEL PROCESSING TECHNOLOGY (2016)
Ash-related issues during biomass combustion: Alkali-induced slagging, silicate melt-induced slagging (ash fusion), agglomeration, corrosion, ash utilization, and related countermeasures
Yanqing Niu et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2016)
Measuring attrition resistance of oxygen carrier particles for chemical looping combustion with a customized jet cup
Magnus Ryden et al.
POWDER TECHNOLOGY (2014)
Effect of particle size, liquid content and location on the stability of agglomerates in a fluidized bed
Flora Parveen et al.
POWDER TECHNOLOGY (2013)
Fluidized bed agglomeration of skim milk powder: Analysis of sampling for the follow-up of agglomerate growth
Christelle Turchiuli et al.
POWDER TECHNOLOGY (2013)
Development of Cu-based oxygen carriers for Chemical-Looping with Oxygen Uncoupling (CLOU) process
Pilar Gayan et al.
FUEL (2012)
Progress in Chemical-Looping Combustion and Reforming technologies
Juan Adanez et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2012)
In-line particle sizing for real-time process control by fibre-optical spatial filtering technique (SFT)
Petrak Dieter et al.
ADVANCED POWDER TECHNOLOGY (2011)
Agglomeration of Food Powder and Applications
K. Dhanalakshmi et al.
CRITICAL REVIEWS IN FOOD SCIENCE AND NUTRITION (2011)
Effect of particle size distribution on agglomeration/defluidization during fluidized bed combustion
Chiou-Liang Lin et al.
POWDER TECHNOLOGY (2011)
Monitoring Fluidized Bed Drying of Pharmaceutical Granules
Lauren Briens et al.
AAPS PHARMSCITECH (2010)
Effect of fuel particle size on reaction rate in chemical looping combustion
Martin Iggland et al.
CHEMICAL ENGINEERING SCIENCE (2010)
Evaluation of in-line spatial filter velocimetry as PAT monitoring tool for particle growth during fluid bed granulation
A. Burggraeve et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2010)
IDENTIFICATION OF THE STATE OF A WET SPOUTED BED THROUGH TIME-FREQUENCY ANALYSIS OF PRESSURE FLUCTUATION TIME SERIES
W. R. Oliveira et al.
CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2009)
The feasibility of using acoustic emissions for monitoring of fluidized bed granulation
Sanni Matero et al.
CHEMOMETRICS AND INTELLIGENT LABORATORY SYSTEMS (2009)
Biomass combustion in fluidized bed boilers: Potential problems and remedies
A. A. Khan et al.
FUEL PROCESSING TECHNOLOGY (2009)
Granule size control and targeting in pulsed spray fluid bed granulation
Henrik Ehlers et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2009)
PEPT visualisation of particle motion in a tapered fluidised bed coater
F. Depypere et al.
JOURNAL OF FOOD ENGINEERING (2009)
Monitoring Granulation Rate Processes Using Three PAT Tools in a Pilot-Scale Fluidized Bed
Ai Tee Tok et al.
AAPS PHARMSCITECH (2008)
Countermeasures against alkali-related problems during combustion of biomass in a circulating fluidized bed boiler
K. O. Davidsson et al.
CHEMICAL ENGINEERING SCIENCE (2008)
In-line monitoring of granule moisture in fluidized-bed dryers using microwave resonance technology
Caroline Buschmueller et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2008)
Use of Coal as Fuel for Chemical-Looping Combustion with Ni-Based Oxygen Carrier
Zhengping Gao et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2008)
Study growth kinetics in fluidized bed granulation with at-line FBRM
Xinhui Hu et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2008)
Controlling granule size by granulation liquid feed pulsing
Tero Narvanen et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2008)
Production of instant soymilk powders by ultrafiltration, spray drying and fluidized bed agglomeration
Nakarin Jinapong et al.
JOURNAL OF FOOD ENGINEERING (2008)
Development of a triboelectric procedure for the measurement of mixing and drying in a vibrated fluidized bed
W. Brennan et al.
POWDER TECHNOLOGY (2008)
Detection of the minimum gas velocity region using Gaussian spectral pressure distribution in a gas-solid fluidized bed
M. R. Parise et al.
POWDER TECHNOLOGY (2008)
Agglomeration in fluidized beds at high temperatures: Mechanisms, detection and prevention
Malte Bartels et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2008)
Fluidised bed characterisation using Raman spectroscopy: Applications to pharmaceutical processing
G. Walker et al.
CHEMICAL ENGINEERING SCIENCE (2007)
Operation of a 10 kWth chemical-looping combustor during 200 h with a CuO-Al2O3 oxygen carrier
Luis F. de Diego et al.
FUEL (2007)
Acoustic monitoring of a fluidized bed coating process
Kaisa Naelapaa et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2007)
Mapping of the range of operational conditions for Cu-, Fe-, and Ni-based oxygen carriers in chemical-looping combustion
Alberto Abad et al.
CHEMICAL ENGINEERING SCIENCE (2007)
Acoustic chemometric monitoring of an industrial granulation production process - a PAT feasibility study
Maths Halstensen et al.
CHEMOMETRICS AND INTELLIGENT LABORATORY SYSTEMS (2006)
Chemical looping combustion in a 10 kWth prototype using a CuO/Al2O3 oxygen carrier:: Effect of operating conditions on methane combustion
Juan Adanez et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2006)
A model for the spray zone in early-stage fluidized bed granulation
S. H. Schaafsma et al.
AICHE JOURNAL (2006)
Effect of process parameters on the melt granulation of pharmaceutical powders
G. M. Walker et al.
POWDER TECHNOLOGY (2006)
Encapsulation of oil in powder using spray drying and fluidised bed agglomeration
M Fuchs et al.
JOURNAL OF FOOD ENGINEERING (2006)
Chemical-looping combustion in a 300 W continuously operating reactor system using a manganese-based oxygen carrier
A Abad et al.
FUEL (2006)
Particles agglomeration in a conical fluidized bed in relation with air temperature profiles
Teresa Jimenez et al.
CHEMICAL ENGINEERING SCIENCE (2006)
Fluidization of moist sawdust in binary particle systems in a gas-solid fluidized bed
KL Clarke et al.
CHEMICAL ENGINEERING SCIENCE (2005)
Application of electrical capacitance tomography to the fluidized bed drying of pharmaceutical granule
G Chaplin et al.
CHEMICAL ENGINEERING SCIENCE (2005)
Use of triboelectric probes for on-line monitoring of liquid concentration in wet gas-solid fluidized beds
F Portoghese et al.
CHEMICAL ENGINEERING SCIENCE (2005)
Fluidised bed agglomeration: Agglomerates shape and end-use properties
C Turchiuli et al.
POWDER TECHNOLOGY (2005)
The effect of glass transition on the desired and undesired agglomeration of amorphous food powders
S Palzer
CHEMICAL ENGINEERING SCIENCE (2005)
Sulfur transformations during thermal conversion of herbaceous biomass
JN Knudsen et al.
ENERGY & FUELS (2004)
Application of the direct quadrature method of moments to polydisperse gas-solid fluidized beds
R Fan et al.
POWDER TECHNOLOGY (2004)
Comparison of iron-, nickel-, copper- and manganese-based oxygen carriers for chemical-looping combustion
P Cho et al.
FUEL (2004)
Multicycle reduction and oxidation of different types of iron oxide particles - Application to chemical-looping combustion
T Mattisson et al.
ENERGY & FUELS (2004)
Agglomeration in bio-fuel fired fluidized bed combustors
WG Lin et al.
CHEMICAL ENGINEERING JOURNAL (2003)
An interdisciplinary approach to size enlargement by agglomeration
W Pietsch
POWDER TECHNOLOGY (2003)
Simultaneous measurement of particle size and particle velocity by the spatial filtering technique
D Petrak
PARTICLE & PARTICLE SYSTEMS CHARACTERIZATION (2002)
Vibro-fluidization of fine boron nitride powder at low pressure
JR Wank et al.
POWDER TECHNOLOGY (2001)
Structuring agglomerated products for improved performance
PC Knight
POWDER TECHNOLOGY (2001)
The ash chemistry in fluidised bed gasification of biomass fuels. Part I: predicting the chemistry of melting ashes and ash-bed material interaction
M Zevenhoven-Onderwater et al.
FUEL (2001)
Nucleation, growth and breakage phenomena in agitated wet granulation processes: a review
SM Iveson et al.
POWDER TECHNOLOGY (2001)
Direct control of wet granulation processes by image processing system
S Watano
POWDER TECHNOLOGY (2001)
Monitoring particle fluidization in a fluidized bed granulator with an acoustic emission sensor
H Tsujimoto et al.
POWDER TECHNOLOGY (2000)
Fluidization and elutriation of iron oxide particles.: A study of attrition and agglomeration processes in fluidized beds
JM Rodríguez et al.
POWDER TECHNOLOGY (2000)
Bed agglomeration characteristics during fluidized bed combustion of biomass fuels
M Ohman et al.
ENERGY & FUELS (2000)
分享论文
