☆ 4.7 Article

Deagglomeration of selected high-load API-carrier particles in swirl-based dry powder inhalers

POWDER TECHNOLOGY (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Chemical

Prediction of the carrier shape effect on particle transport, interaction and deposition in two dry powder inhalers and a mouth-to-G13 human respiratory system: A CFD-DEM study

Jianan Zhao et al.

Summary: This study developed a computational method to evaluate the comparability between generic inhaler designs and reference listed drug inhalers. Numerical simulations showed that the shape of lactose carriers significantly influenced the delivery efficiency of the inhaler, while it had minimal impact on the deposition patterns of the active pharmaceutical ingredient. Low actuation flow rates could potentially enhance drug delivery efficiency.

JOURNAL OF AEROSOL SCIENCE (2022)

添加到收藏夹

Article Engineering, Chemical

Coarse-grain DEM-CFD modelling of dense particle flow in Gas-Solid cyclone

Erasmo S. Napolitano et al.

Summary: The design, scale-up and operation of cyclone gas-solid separators are mostly based on simplified models and experience, but previous simulations are not applicable for high-load operations with large particles. The use of DEM-CFD simulations allows for four-way coupled dense flow but is computationally expensive. Coarse-graining methods have been proposed to reduce the computational cost, but more research is needed to understand the trade-off between accuracy and speed-up. This study investigates a coarse-grain DEM-CFD approach for simulating two-phase flow in a cyclone and finds that while macroscopic quantities are maintained, detailed features of the gas and solids flow are affected by the level of coarse graining.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Chemical

Full-Scale DEM Simulation of Coupled Fluid and Dry-Coated Particle Flow in Swirl-Based Dry Powder Inhalers

Francesca Orsola Alfano et al.

Summary: Fine particle lift and aerodispersion play crucial roles in delivering active pharmaceutical ingredient (API) powder to patient lungs. Computational fluid dynamics-discrete element method (DEM) simulations are used to characterize the flow field of air and API-coated carrier particles in a swirl-based DPI geometry, providing valuable insights into microscopic mechanisms.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Effects of dose loading conditions and device geometry on the transport and aerosolization in dry powder inhalers: A simulation study

Mostafa Sulaiman et al.

Summary: The study used Computational Fluid Dynamics-Discrete Element Method simulations to investigate the transport and aerosolization of particles in different dry powder inhaler geometries. The research found that geometry modifications can significantly impact aerosolization quality and device performance.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

添加到收藏夹

Review Engineering, Chemical

Coarse-Grain DEM Modelling in Fluidized Bed Simulation: A Review

Alberto Di Renzo et al.

Summary: In the past decade, the application of CFD-DEM for fluidized beds has expanded from small, lab-scale units to larger scale systems, benefiting greatly from coarse graining methods. By introducing coarse graining procedures based on different physical backgrounds, the number of particles that can be simulated has increased, covering pilot-scale and industrially relevant systems. The review discusses scaling for contact forces, hydrodynamic forces, and cohesive forces, quantifying computational savings in terms of coarse graining degree and presenting recent applications and future directions in the field.

PROCESSES (2021)

添加到收藏夹

Article Engineering, Chemical

Computational analysis of triboelectrification due to aerodynamic powder dispersion

Francesca Orsola Alfano et al.

Summary: Triboelectric charging has a significant impact on bulk powder flow behavior, especially in pharmaceutical particles; the charge-to-surface area ratio is close to equilibrium value for different materials; aerodynamic dispersion shows great potential for inducing triboelectric charge transfer.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Inhaled Edoxaban dry powder inhaler formulations: Development, characterization and their effects on the coagulopathy associated with COVID-19 infection

Md Abdur Rashid et al.

Summary: In this study, a dry powder inhaler (DPI) formulation of edoxaban (EDX) was developed and characterized, demonstrating promising in-vitro anticoagulation effect for managing pulmonary or cerebral coagulopathy associated with COVID-19 infection.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

添加到收藏夹

Article Engineering, Chemical

Effect of carrier size and mechanical properties on adhesive unit stability for inhalation: A numerical study

Sohan Sarangi et al.

Summary: The Discrete Element Method (DEM) was used to investigate the micromechanics of adhesive units. Results showed that mannitol particles are more stable than lactose, and the 200 pm carrier is the most stable among the particles investigated. These findings could be applied to the development of macro models for particle engineering and formulation optimization.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Chemical

The effect of carrier surface roughness on wall collision-induced detachment of micronized pharmaceutical particles

Mohammad R. Tamadondar et al.

AICHE JOURNAL (2020)

添加到收藏夹

Article Engineering, Chemical

Numerical Investigation of Funicular Liquid Bridge Interactions Between Spherical Particles

Alberto Di Renzo et al.

CHEMICAL ENGINEERING & TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Chemical

CFD-DEM coupled with thermochemical sub-models for biomass gasification: Validation and sensitivity analysis

Shuai Wang et al.

CHEMICAL ENGINEERING SCIENCE (2020)

添加到收藏夹

Review Pharmacology & Pharmacy

Potential and constraints for the application of CFD combined with Lagrangian particle tracking to dry powder inhalers

M. Sommerfeld et al.

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2019)

添加到收藏夹

Article Pharmacology & Pharmacy

Limitations of high dose carrier based formulations

Stewart Yeung et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)

添加到收藏夹

Article Pharmacology & Pharmacy

Evaluation of a new dispersion technique for assessing triboelectric charging of powders

U. Zafar et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)

添加到收藏夹

Article Pharmacology & Pharmacy

Optical diagnostics studies of air flow and powder fluidisation in Nexthaler®. Part II: Use of fluorescent imaging to characterise transient release of fines from a dry powder inhaler

C. Merusi et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)

添加到收藏夹

Article Pharmacology & Pharmacy

DPI formulations for high dose applications - Challenges and opportunities

Regina Scherliess et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)

添加到收藏夹

Article Pharmacology & Pharmacy

Dosing challenges in respiratory therapies

Stewart Yeung et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)

添加到收藏夹

Article Engineering, Chemical

Wall collision and drug-carrier detachment in dry powder inhalers: Using DEM to devise a sub-scale model for CFD calculations

M. Ariane et al.

POWDER TECHNOLOGY (2018)

添加到收藏夹

Article Pharmacology & Pharmacy

Experimental and computational study of the effect of breath-actuated mechanism built in the NEXThaler® dry powder inhaler

Arpad Farkas et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)

添加到收藏夹

Article Engineering, Chemical

CFD-DEM study of the aerosolisation mechanism of carrier-based formulations with high drug loadings

Z. B. Tong et al.

POWDER TECHNOLOGY (2017)

添加到收藏夹

Article Engineering, Mechanical

Numerical Analysis of Carrier Particle Motion in a Dry Powder Inhaler

Martin Sommerfeld et al.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2016)

添加到收藏夹

Review Pharmacology & Pharmacy

Technological and practical challenges of dry powder inhalers and formulations

M. Hoppentocht et al.

ADVANCED DRUG DELIVERY REVIEWS (2014)

添加到收藏夹

Review Pharmacology & Pharmacy

How can we bring high drug doses to the lung?

Sarah Claus et al.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2014)

添加到收藏夹

Article Pharmacology & Pharmacy

Three-dimensional DEM-CFD analysis of air-flow-induced detachment of API particles from carrier particles in dry powder inhalers

Jiecheng Yang et al.

ACTA PHARMACEUTICA SINICA B (2014)

添加到收藏夹

Article Mechanics

Torque-coupling and particle-turbulence interactions

Helge I. Andersson et al.

JOURNAL OF FLUID MECHANICS (2012)

添加到收藏夹

Article Engineering, Chemical

Rolling friction as a technique for modelling particle shape in DEM

C. M. Wensrich et al.

POWDER TECHNOLOGY (2012)

添加到收藏夹

Article Engineering, Chemical

Open-source MFIX-DEM software for gas-solids flows: Part I-Verification studies

Rahul Garg et al.

POWDER TECHNOLOGY (2012)

添加到收藏夹

Article Engineering, Chemical

Open-source MFIX-DEM software for gas-solids flows: Part II - Validation studies

Tingwen Li et al.

POWDER TECHNOLOGY (2012)

添加到收藏夹

Article Pharmacology & Pharmacy

The influence of drug loading on formulation structure and aerosol performance in carrier based dry powder inhalers

Paul M. Young et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2011)

添加到收藏夹

Article Engineering, Chemical

Assessment of rolling resistance models in discrete element simulations

Jun Ai et al.

POWDER TECHNOLOGY (2011)

添加到收藏夹

Article Engineering, Chemical

A semi-empirical model for the drag force and fluid-particle interaction in polydisperse suspensions

Fernando Cello et al.

CHEMICAL ENGINEERING SCIENCE (2010)

添加到收藏夹

Review Pharmacology & Pharmacy

Dry powder inhalers (DPIs) - A review of device reliability and innovation

Nazrul Islam et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2008)

添加到收藏夹

Article Pharmacology & Pharmacy

The influence of dose on the performance of dry powder inhalation systems

PA Young et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2005)

添加到收藏夹

Article Engineering, Chemical

An improved integral non-linear model for the contact of particles in distinct element simulations

A Di Renzo et al.

CHEMICAL ENGINEERING SCIENCE (2005)

添加到收藏夹

Article Pharmacology & Pharmacy

The interaction between carrier rugosity and carrier payload, and its effect on drug particle redispersion from adhesive mixtures during inhalation

BHJ Dickhoff et al.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2005)

添加到收藏夹

Article Engineering, Chemical

Comparison of contact-force models for the simulation of collisions in DEM-based granular flow codes

A Di Renzo et al.

CHEMICAL ENGINEERING SCIENCE (2004)

添加到收藏夹

Article Chemistry, Multidisciplinary

The cohesive-adhesive balances in dry powder inhaler formulations I: Direct quantification by atomic force microscopy

P Begat et al.

PHARMACEUTICAL RESEARCH (2004)

添加到收藏夹

Article Chemistry, Multidisciplinary

The cohesive-adhesive balances in dry powder inhaler formulations II: Influence on fine particle delivery characteristics

P Begat et al.

PHARMACEUTICAL RESEARCH (2004)

添加到收藏夹

Article Pharmacology & Pharmacy

The effect of carrier surface and bulk properties on drug particle detachment from crystalline lactose carrier particles during inhalation, as function of carrier payload and mixing time

BHJ Dickhoff et al.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.