☆ 4.7 Article

Physical, mechanical, and sliding wear behavior of epoxy composites filled with surface modified walnut shell particulate

POLYMER COMPOSITES (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Materials Science, Composites

A comprehensive review of coconut shell powder composites: Preparation, processing, and characterization

Seri Nur Iman Hidayah Ahmad Nadzri et al.

Summary: Coconut shell can be used to produce biocomposites, which can reduce pollution risk, synthetic fiber usage, production cost, and fuel consumption. This review focused on the fundamental, mechanical, physical, and thermal properties of CSP composites and provided a critical evaluation of their development and application design.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2022)

添加到收藏夹

Article Materials Science, Textiles

Effect of erosive parameters on solid particle erosion of cotton fiber-based nonwoven mat/wooden dust reinforced hybrid polymer composites

Sachin Tejyan

Summary: The addition of nonwoven cotton fibers to hybrid epoxy composites improves the physical, mechanical properties and erosion wear resistance of the materials, leading to increased impact strength, hardness, compressive and tensile strength. However, the density of the composites also increases with the addition of cotton fibers. In terms of erosion wear, the most significant parameter affecting the wear is impact velocity.

JOURNAL OF INDUSTRIAL TEXTILES (2022)

添加到收藏夹

Article Materials Science, Composites

Physical and mechanical properties of epoxy/Kota stone dust/fly ash hybrid composites for light duty structural applications

Virendra Rajput et al.

Summary: A novel hybrid composite utilizing Kota stone dust and fly ash as reinforcing phases in an epoxy matrix was developed and tested for physical and mechanical properties. The results showed that the hybrid composites exhibited better mechanical properties compared to single filler composites, although physical properties were slightly compromised by the hybridization of fillers.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Development and Characterization of Epoxy-Based Polymeric Composite with Bio-particulates as Filler Material

S. Chandraker et al.

Summary: This study developed polymeric composites using pistachio nutshells as filler material, showing potential applications in light-duty structures based on various test results.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Textiles

A Study on Alkali Treatment Influence on Prosopis Juliflora Fiber-Reinforced Epoxy Composites

P. Venkateshwar Reddy et al.

Summary: Recent studies have shown that alkali treatment of prosopis juliflora fibers can improve their bonding with the polymer matrix, increase their strength, and reduce water absorption. The effects of alkali treatment on prosopis juliflora fibers can be distinguished through FTIR, TGA, and SEM analysis, which are important for optimizing the performance of composite materials.

JOURNAL OF NATURAL FIBERS (2021)

添加到收藏夹

Article Materials Science, Textiles

Characterization of Hazelnut, Pistachio, and Apricot Kernel Shell Particles and Analysis of Their Composite Properties

Yahya Hisma Celik et al.

Summary: In this study, hazelnut, pistachio, and apricot kernel shells were analyzed for their chemical and structural properties, and their impact on the physical, thermal, and mechanical properties of polyester matrix composites was studied. The addition of powder particles at low rates was found to have a positive effect on bending and compressive strength of the matrix material.

JOURNAL OF NATURAL FIBERS (2021)

添加到收藏夹

Article Materials Science, Composites

Abrasive wear and dynamic-mechanical behavior of marble dust filled bagasse fiber reinforced hybrid polymer composites

Tej Singh et al.

Summary: The study explored the influence of waste materials on various properties of polymer composites, such as physico-mechanical, dynamic mechanical, and abrasive wear behavior. It was found that increasing the waste bagasse fiber loading led to improvements in density, impact energy, and flexural strength, while decreasing hardness and tensile strength after an optimal level. The composites with 10 wt% waste bagasse fiber showed the highest viscoelastic properties. Additionally, the Taguchi method was used to investigate the dry sand abrasive wear behavior, revealing that sliding distance had the most significant contribution to the wear of the composites.

POLYMER COMPOSITES (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Influence of the size of walnut shell particulates on mechanical properties of epoxy-based composites

Satish Kumar Shejkar et al.

Journal of Engineering Research (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Analysis of Dry Sliding Wear Behavior of Polyester Filled with Walnut Shell Powder Using Response Surface Method and Neural Networks

Priyabrat Pradhan et al.

Summary: This study critically analyzed the dry sliding wear characteristics of polyester-based composites using systematic experimentation integrated with artificial neural networks (ANN) and response surface methodology (RSM). It was found that sliding velocity, filler content, and normal load are significant factors influencing the wear rate of the composites.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)

添加到收藏夹

Article Materials Science, Characterization & Testing

Mechanical, dynamic and tribological characterization of HDPE/peanut shell composites

E. Garcia et al.

Summary: In this study, composites of HDPE with different proportions of peanut shell filler were tested for their dynamic mechanical and tribological properties. The results showed that an increase in fibre content initially led to an increase in strain in HDPE, but after a certain threshold, a significant reduction was observed. The E' values of the composites remained stable within a certain temperature range, and the addition of fibre did not significantly modify the tribological properties of HDPE.

POLYMER TESTING (2021)

添加到收藏夹

Article Materials Science, Composites

Fused deposition modeling of poly (lactic acid)/almond shell composite filaments

Xiaohui Song et al.

Summary: This paper investigates the preparation of PLA/ASP composite filaments, determines the optimal material ratios and chemical treatment conditions, enhances the thermal and mechanical properties of the composites, and ultimately manufactures lightweight parts with internal pores. The results demonstrate the potential of PLA/ASP composites in producing lighter-weight parts with internal pores through FDM.

POLYMER COMPOSITES (2021)

添加到收藏夹

Article Agricultural Engineering

The use of alkali treated walnut shells as filler in plasticized poly(lactic acid) matrix composites

Ander Orue et al.

INDUSTRIAL CROPS AND PRODUCTS (2020)

添加到收藏夹

Article Engineering, Chemical

Comparative mechanical, thermal properties and morphological study of untreated and NaOH-treated coconut shell-reinforced cardanol environmental friendly green composites

R. Udhayasankar et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Environmental

Effects of Various Methods of Chemical Modification of Lignocellulose Hazelnut Shell Waste on a Newly Synthesized Bio-based Epoxy Composite

Suheyla Kocaman et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2020)

添加到收藏夹

Article Materials Science, Composites

Influence of particulate surface treatment on physical, mechanical, thermal, and dielectric behavior of epoxy/hexagonal boron nitride composites

Alok Agrawal et al.

POLYMER COMPOSITES (2020)

添加到收藏夹

Article Materials Science, Composites

Polyester composites filled with walnut shell powder: Preparation and thermal characterization

Priyabrat Pradhan et al.

POLYMER COMPOSITES (2020)

添加到收藏夹

Article Polymer Science

Effect of Almond Shell Waste on Physicochemical Properties of Polyester-Based Biocomposites

Marina Ramos et al.

POLYMERS (2020)

添加到收藏夹

Article Materials Science, Characterization & Testing

Effect of walnut shells and silanized walnut shells on the mechanical and thermal properties of rigid polyurethane foams

Sylwia Czlonka et al.

POLYMER TESTING (2020)

添加到收藏夹

Article Materials Science, Textiles

Physico-mechanical and erosive wear analysis of polyester fibre-based nonwoven fabric-reinforced polymer composites

Sachin Tejyan et al.

JOURNAL OF INDUSTRIAL TEXTILES (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tensile and compressive strength of palm kernel shell particle reinforced polyester composites

I. C. Ezema Ike-Eze et al.

MATERIALS RESEARCH EXPRESS (2019)

添加到收藏夹

Article Environmental Sciences

Experimental analysis of tensile, flexural, and tribological properties of walnut shell powder/polyester composites

Vishal Ahlawat et al.

EURO-MEDITERRANEAN JOURNAL FOR ENVIRONMENTAL INTEGRATION (2019)

添加到收藏夹

Article Polymer Science

Evaluation of highly filled epoxy composites modified with walnut shell waste filler

Kamila Salasinska et al.

POLYMER BULLETIN (2018)

添加到收藏夹

Article Polymer Science

Investigation on Physicomechanical, Thermal, and Morphological of Dipodal Silane-Modified Walnut Shell Powder-Filled Polyurethane Green Composites and Their Application for Removal of Heavy Metal Ions from Water

Shahryar Pashaei et al.

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2018)

添加到收藏夹

Article Materials Science, Composites

Synergy of cashew nut shell filler on tribological behaviors of natural-fiber-reinforced epoxy composite

T. Palanisamy Sathishkumar et al.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2018)

添加到收藏夹

Article Engineering, Mechanical

Influence of surface modification on wear behavior of fly ash cenosphere/epoxy syntactic foam

Kiran Shahapurkar et al.

WEAR (2018)

添加到收藏夹

Article Biochemistry & Molecular Biology

Bio-composites based on polylactic acid and argan nut shell: Production and properties

Sana Ait Laaziz et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2017)

添加到收藏夹

Article Chemistry, Applied

Biocomposites based on Argan nut shell and a polymer matrix: Effect of filler content and coupling agent

Hamid Essabir et al.

CARBOHYDRATE POLYMERS (2016)

添加到收藏夹

Article Engineering, Mechanical

Dry sliding wear of epoxy/cenosphere syntactic foams

Vyasaraj Manakari et al.

TRIBOLOGY INTERNATIONAL (2015)

添加到收藏夹

Article Materials Science, Composites

Mechanical behavior of walnut (Juglans L.) shell particles reinforced bio-composite

Vinay K. Singh

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2015)

添加到收藏夹

Article Materials Science, Composites

Optimization of the alkali treatment process of date palm fibres for polymeric composites

I. Taha et al.

COMPOSITE INTERFACES (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.