☆ 4.7 Article

Fracture behavior, microstructure, and mechanical properties of PA6/NBR nanocomposites

POLYMER COMPOSITES (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Composites

Comparison of mechanical properties and thermal stability of graphene-based materials and halloysite nanotubes reinforced maleated polymer compatibilized polypropylene nanocomposites

Obinna Emmanuel Ezenkwa et al.

Summary: This study compared the reinforcing effects of different nanofillers in polypropylene nanocomposites. Graphene nanoplatelets showed the best mechanical properties and thermal stability, graphene oxide improved bending properties, and halloysite nanotubes exhibited good ductility.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Materials Science, Composites

Effect of fumed silica and halloysite nanoparticles on the microstructure, mechanical, and fracture properties of thermoplastic polyolefin elastomer toughened polypropylene

Pouya Rajaee et al.

Summary: The mechanical and fracture properties of nanoparticles filled polypropylene toughened with thermoplastic elastomers were investigated in this study. The addition of TPO enhanced the elongation at break and fracture behavior, while increasing the nanoparticles content improved the tensile strength and modulus. The blend nanocomposite with 10% PTPO and 1% FS demonstrated the best stiffness-toughness-strength equivalence. The experimental data showed good agreement with the full factorial models.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Predicting the tensile strength and elongation at break of PP/graphene/glass fiber/EPDM nanocomposites using response surface methodology

Faramarz Ashenai Ghasemi et al.

Summary: Graphene, glass fiber, and EPDM were found to have significant effects on the tensile properties of polypropylene-based nanocomposites. Main parameters influencing the properties were identified and models were proposed for each response, with optimum areas for tensile properties determined. Additionally, thermal analysis results showed that the presence of nanoparticles increased the glass transition temperature of the nanocomposites.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2021)

添加到收藏夹

Article Materials Science, Composites

Multi-objective optimization of wear performance of epoxy composites by gray-based response surface methodology

Satish Kumar Dharmalingam et al.

Summary: This study aimed to optimize the tribological performances of epoxy, epoxy/strand mat E-glass fiber composite, and hybrid composite of epoxy/strand mat E-glass fiber/carbon. Gray relational analysis was used to identify the optimal parameters for minimum weight loss and coefficient of friction. The results showed that the epoxy/strand mat E-glass fiber/carbon composite exhibited good wear resistance and a lower coefficient of friction.

POLYMER COMPOSITES (2021)

添加到收藏夹

Article Chemistry, Applied

Naturally occurring halloysite nanotubes for enhanced durability of natural rubber/ethylene propylene diene monomer rubber vulcanizate

Saman Ghaderzadeh et al.

Summary: The study demonstrates that the use of halloysite nanotubes (HNTs) significantly improves the stability and fatigue life of natural rubber (NR)/ethylene propylene diene monomer rubber (EPDM) blends, while reducing swelling in solvents.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Composites

Wear characteristics of glass-polyester-based hybrid composites: A parametric analysis using response surface method and fuzzy logic

Sandip Kumar Nayak et al.

POLYMER COMPOSITES (2020)

添加到收藏夹

Article Materials Science, Composites

Study of morphology and mechanical properties of PP/EPDM/clay nanocomposites prepared using twin-screw extruder and friction stir process

Mohammad Reza Nakhaei et al.

POLYMER COMPOSITES (2019)

添加到收藏夹

Article Materials Science, Composites

Effect of Process Parameters on Fracture Toughness of PP/EPDM/Nanoclay Nanocomposite Fabricated by Novel Method of Heat Assisted Friction Stir Processing

Amir Mostafapour et al.

POLYMER COMPOSITES (2018)

添加到收藏夹

Article Polymer Science

Effect of carbon nanotube on PA6/ECO composites: Morphology development, rheological, and thermal properties

Elnaz Esmizadeh et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2018)

添加到收藏夹

Article Mechanics

Essential work of fracture and failure mechanisms in dynamically vulcanized thermoplastic elastomer nanocomposites based on PA6/NBR/XNBR-grafted HNTs

S. M. R. Paran et al.

ENGINEERING FRACTURE MECHANICS (2018)

添加到收藏夹

Article Polymer Science

Mechanical and morphological properties of LDPE/perlite nanocomposite films

R. Sahraeian et al.

POLYMER BULLETIN (2017)

添加到收藏夹

Article Materials Science, Composites

Fracture toughness and deformation mechanism of un-vulcanized and dynamically vulcanized polypropylene/ethylene propylene diene monomer/graphene nanocomposites

M. Haghnegandar et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2017)

添加到收藏夹

Article Chemistry, Applied

Dynamically vulcanized polypropylene/ethylene-propylene diene monomer/organoclay nanocomposites: Effect of mixing sequence on structural, rheological, and mechanical properties

Ghasem Naderi et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synergistic toughening effects of dispersed components in PP/PA6/EPDM ternary blends; quantitative analysis of the fracture toughness via the essential work of fracture (EWF) methodology

Majid Mehrabi Mazidi et al.

RSC ADVANCES (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Fracture toughness and failure mechanisms in un-vulcanized and dynamically vulcanized PP/EPDM/MWCNT blend-nanocomposites

Mehrdad Khodabandelou et al.

RSC ADVANCES (2015)

添加到收藏夹

Article Engineering, Chemical

Essential work of fracture analysis of short glass fiber and/or calcite reinforced ABS/PA6 composites

Sinan Yilmaz et al.

POLYMER ENGINEERING AND SCIENCE (2014)

添加到收藏夹

Article Materials Science, Characterization & Testing

Rheological, Thermal and Dynamic Mechanical Studies of the LDPE/Perlite Nanocomposites

R. Sahraeian et al.

POLYMERS & POLYMER COMPOSITES (2013)

添加到收藏夹

Article Optics

Modeling and analysis of simultaneous laser transmission welding of polycarbonates using an FEM and RSM combined approach

Bappa Acherjee et al.

OPTICS AND LASER TECHNOLOGY (2012)

添加到收藏夹

Article Materials Science, Composites

Mechanical and Rheological Properties of PA6/ABS Blends - With and Without Short Glass Fiber

Agus Arsad et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)

添加到收藏夹

Review Polymer Science

Application of the essential work of fracture (EWF) concept for polymers, related blends and composites: A review

T. Barany et al.

PROGRESS IN POLYMER SCIENCE (2010)

添加到收藏夹

Article Mechanics

Rheological and morphological properties of PA6/ECO nanocomposites

Ehsan Taghizadeh et al.

RHEOLOGICA ACTA (2010)

添加到收藏夹

Article Materials Science, Composites

Effect of organoclay and ethylene-octene copolymer inclusion on the morphology and mechanical properties of polyamide/polypropylene blends

M. U. Wahit et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2006)

添加到收藏夹

Article Polymer Science

Deformation, yield and fracture of elastomer-modified polypropylene

SM Zebarjad et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2003)

添加到收藏夹

Article Engineering, Chemical

Essential work of fracture (EWF) analysis for short glass fiber reinforced and rubber toughened nylon-6

ECY Ching et al.

POLYMER ENGINEERING AND SCIENCE (2003)

添加到收藏夹

Article Materials Science, Characterization & Testing

Measurement of plane stress essential work of fracture (EWF) for polymer films: effects of gripping and notching methodology

WKY Poon et al.

POLYMER TESTING (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.