☆ 4.7 Article

Investigation on dynamic strength of 3D-printed continuous ramie fiber reinforced biocomposites at various strain rates using machine learning methods

POLYMER COMPOSITES (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Composites

Stochastic integrated machine learning based multiscale approach for the prediction of the thermal conductivity in carbon nanotube reinforced polymeric composites

Bokai Liu et al.

Summary: We propose a stochastic integrated machine learning approach for predicting the macroscopic thermal conductivity in carbon nanotube reinforced polymeric composites. By utilizing different machine learning models and optimizing hyperparameters with particle swarm optimization, this approach reduces computational cost and provides valuable insights in the computational design of new composites for thermal management applications.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Civil

On crashworthiness behaviors of 3D printed multi-cell filled thin-walled structures

Kui Wang et al.

Summary: In this paper, multi-cell filled thin-walled structures were prepared using fused deposition modeling by carbon-fiber-reinforced polyamide. The crashworthiness behaviors of the structures were studied, and the effect of fillings on their performance was investigated. The results showed that increasing the filling density improved the specific energy absorption and crushing force efficiency. The circular filled structures exhibited higher specific energy absorption, and at high loading velocity, the energy absorption and crushing force efficiency of all structures decreased. The failure mode of the structures also changed from ductile damage to brittle fracture.

ENGINEERING STRUCTURES (2022)

添加到收藏夹

Article Polymer Science

Effect of temperature and strain rate on the formation of shear bands in polymers under quasi-static and dynamic compressive loadings: Proposed constitutive model and numerical validation

E. Farotti et al.

Summary: The mechanical behavior of polymers is greatly influenced by temperature and strain rate conditions. This study proposes a constitutive law for characterizing polymers that exhibit shear banding during compression loading, and the validity of this method is confirmed through numerical calculations and experimental observations.

POLYMER (2022)

添加到收藏夹

Article Materials Science, Composites

Flexural damage and failure behavior of 3D printed continuous fiber composites by complementary nondestructive testing technology

Zhi-bo Pan et al.

Summary: This study investigates the flexural damage and evolution behavior of 3D printed continuous fiber-reinforced composites using acoustic emission technology. The results show that matrix buckling and interface failure are the main failure modes and Kevlar fiber-reinforced composites have more serious damage. The combination of complementary detection methods is beneficial for the nondestructive evaluation and health monitoring of 3D printed composite materials.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Materials Science, Composites

Mechanical behavior and damage kinetics of a unidirectional carbon/epoxy laminated composite under dynamic compressive loading

Wenbo Xie et al.

Summary: This work investigated the mechanical behavior and damage kinetics of a unidirectional carbon/epoxy laminated composite (CFRP) under dynamic compressive loading. Experimental tests were conducted using an Instron testing machine and a pulse-shaped split Hopkinson pressure bar (SHPB) apparatus. Digital image correlation (DIC) combined with ultra high-speed photography was used to study the deformation and failure process. The research established an empirical formula for dynamic compression strength and developed a simplified nonlinear visco-hyperelastic constitutive model to predict the mechanical behaviors. The findings contribute to the improvement of CFRP composite design subjected to high-speed impact loads.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Materials Science, Characterization & Testing

Application of machine learning methods on dynamic strength analysis for additive manufactured polypropylene-based composites

Ruijun Cai et al.

Summary: This study applied machine learning methods to analyze the dynamic strength of 3D-printed polypropylene-based composites, evaluating six different algorithms for their performance. Artificial neural network showed high prediction accuracy but low computational efficiency, while support vector regression provided satisfactory prediction with good accuracy and efficiency. Extreme gradient boosting and random forest approaches were recommended for importance of input.

POLYMER TESTING (2022)

添加到收藏夹

Review Engineering, Manufacturing

Data-driven modeling of process, structure and property in additive manufacturing: A review and future directions

Zhuo Wang et al.

Summary: This paper provides a systematic review of existing data-driven additive manufacturing (AM) modeling, focusing on different quantities of interest (QoI) along the process-structure-property chain. It summarizes important information and analyzes the successes achieved so far. The paper also discusses the limitations and suggests promising research directions for advancing data-driven AM modeling.

JOURNAL OF MANUFACTURING PROCESSES (2022)

添加到收藏夹

Review Materials Science, Characterization & Testing

The mechanical testing and performance analysis of polymer-fibre composites prepared through the additive manufacturing

Vigneshwaran Shanmugam et al.

Summary: The recent development of fibre composites is strong due to their high performance and durability. However, polymer-fibre composites manufactured through additive manufacturing (AM) have lower strength compared to traditional processes. This comprehensive review focuses on mechanical testing and performance analysis of polymer-fibre composites fabricated through AM, particularly fused deposition modelling (FDM).

POLYMER TESTING (2021)

添加到收藏夹

Article Engineering, Manufacturing

Influence of residual stress and fluid-structure interaction on the impact behavior of fused filament fabrication components

Sumair Sunny et al.

Summary: This study examines the fluid-structure interaction behavior of cellular fused filament fabrication polymer components under high strain-rate impact conditions and the influence of residual stresses on stress states. Findings show that residual stresses significantly affect the stress-strain response during dynamic impact and must be considered along with fluid-structure interaction for accurate characterization of impact behavior. The 2-stage computational approach is validated by comparing numerical predictions with experimental measurements, demonstrating the importance of residual stresses and FSI in impact scenarios.

ADDITIVE MANUFACTURING (2021)

添加到收藏夹

Review Engineering, Multidisciplinary

A review of artificial neural networks in the constitutive modeling of composite materials

Xin Liu et al.

Summary: Machine learning models, especially artificial neural networks, are increasingly used in engineering fields. However, there are still unsolved issues hindering the acceptance of ANN models in the practical design and analysis of composite materials. The emerging machine learning techniques pose both new opportunities and challenges in the data-based design paradigm.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Agricultural Engineering

Interfacial and mechanical properties of continuous ramie fiber reinforced biocomposites fabricated by in-situ impregnated 3D printing

Ping Cheng et al.

Summary: This study aimed to investigate the mechanical properties and interfacial analysis of 3D printed continuous vegetal fiber reinforced biomass based composites. The results showed that the mechanical behaviors of the biocomposites were influenced by the interfacial properties between deposited layers and between fiber/matrix interfaces. By controlling the printing parameters, significant microstructure changes were observed in the biocomposites, leading to the highest tensile strength found at specific printing conditions.

INDUSTRIAL CROPS AND PRODUCTS (2021)

添加到收藏夹

Review Chemistry, Physical

Artificial Neural Network Algorithms for 3D Printing

Muhammad Arif Mahmood et al.

Summary: The application of machine learning technology, particularly the use of artificial neural network models, shows great potential in the field of 3D printing due to its ability to handle large datasets and strong computational power.

MATERIALS (2021)

添加到收藏夹

Article Materials Science, Composites

Mechanical properties enhancement in composite material structures of poly-lactic acid/epoxy/milled glass fibers prepared by fused filament fabrication and solution casting

Ammar Mustafa et al.

Summary: The study focused on utilizing additive manufacturing technology to develop multi-material components with different structures. Mechanical properties were evaluated through compression, bending, and tensile tests, showing that incorporating 5% volume of glass fibers (MGFs) in the TMS resulted in significantly improved performance. Cone-beam CT scan and high-resolution scanning electron microscope were used to observe voids and microstructural evolution in the developed materials.

POLYMER COMPOSITES (2021)

添加到收藏夹

Article Materials Science, Characterization & Testing

Compressive behaviors of 3D printed polypropylene-based composites at low and high strain rates

Kui Wang et al.

Summary: The study found that by controlling the extrusion temperature and layer thickness of 3D-printed PP-based composites, the size and porosity of voids generated during processing can be effectively reduced, thereby improving the mechanical properties of the parts. Under dynamic compression loading, the apparent strength and modulus of the materials were significantly higher.

POLYMER TESTING (2021)

添加到收藏夹

Article Engineering, Mechanical

High strain rate impact effect and failure behavior of 3D six-directional braided composites

Dian-sen Li et al.

Summary: This paper investigates the high strain rate impact effect and failure behavior of three-dimensional six-directional (3D6d) braided composites. The results indicate that the composites exhibit typical strain rate sensitivity, with increased strength and modulus but decreased failure strain as the strain rate rises. Additionally, composites with larger braiding angles show higher dynamic curves and improved high strain rate properties.

EXTREME MECHANICS LETTERS (2021)

添加到收藏夹

Article Materials Science, Composites

Effect of process parameters on thermal and mechanical properties of polymer-based composites using fused filament fabrication

Khaled Benfriha et al.

Summary: This study investigates the effect of key process parameters on the temperature evolution and mechanical behavior of PA6 reinforced with chopped carbon fibers produced by FFF. Results indicate the relationship between parameters and mechanical properties of parts. The measurement of temperature profiles reveals the impact of process parameters on cooling and filament bonding.

POLYMER COMPOSITES (2021)

添加到收藏夹

Article Materials Science, Composites

3D printing of continuous carbon fiber reinforced thermoset composites using UV curable resin

Md Atikur Rahman et al.

Summary: This study addresses the challenge of 3D printing with continuous fiber-reinforced thermoset composite by developing a 3D printer capable of printing a UV curable resin system reinforced with continuous carbon fiber. The variations of printed composites' mechanical properties depending on the fiber tow characteristic were investigated, with two different carbon fiber types and their associated tow twist count and sizing evaluated. Burn-off tests were used to determine the printed composites' final fiber volume fraction, and predicted strength and modulus values were compared against experimental values, showing good agreement for modulus but significant deviation for strength.

POLYMER COMPOSITES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Machine learning in predicting mechanical behavior of additively manufactured parts

Sara Nasiri et al.

Summary: This study introduces the application of machine learning in predicting the structural performance and fracture of additively manufactured components, with a focus on its use in predicting the mechanical behavior of 3D printed parts. Previous research on the application of ML in characterizing polymeric and metallic 3D-printed parts is reviewed and discussed to highlight potential limitations, challenges, and future perspectives for industrial applications of ML in additive manufacturing.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Review Engineering, Manufacturing

Additively manufactured carbon fiber-reinforced composites: State of the art and perspective

Nekoda van de Werken et al.

ADDITIVE MANUFACTURING (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Machine Learning in Additive Manufacturing: A Review

Lingbin Meng et al.

JOM (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Design of FDM 3D printed polymers: An experimental-modelling methodology for the prediction of mechanical properties

S. Garzon-Hernandez et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Mechanics

Experimental investigation on the dynamic behavior of 3D printed CF-PEKK composite under cyclic uniaxial compression

M. Nachtane et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Engineering, Industrial

The effect of additive manufacturing adoption on supply chain flexibility and performance: An empirical analysis from the automotive industry

Mia Delic et al.

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Tailoring the mechanical properties of 3D-printed continuous flax/PLA biocomposites by controlling the slicing parameters

A. Le Duigou et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Engineering, Manufacturing

Machine learning in additive manufacturing: State-of-the-art and perspectives

C. Wang et al.

ADDITIVE MANUFACTURING (2020)

添加到收藏夹

Review Engineering, Multidisciplinary

A critical review on the fused deposition modeling of thermoplastic polymer composites

Pavan Kumar Penumakala et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Composites

Low-pressure additive manufacturing of continuous fiber-reinforced polymer composites

Heather J. O'Connor et al.

POLYMER COMPOSITES (2019)

添加到收藏夹

Article Agricultural Engineering

Manufacturing and characterization of sustainable hybrid composites using sisal and hemp fibres as reinforcement of poly (lactic acid) via injection moulding

Asokan Pappu et al.

INDUSTRIAL CROPS AND PRODUCTS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D printing of continuous flax fibre reinforced biocomposites for structural applications

A. Le Duigou et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite

Guo Dong Goh et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

添加到收藏夹

Review Engineering, Multidisciplinary

Additive manufacturing (3D printing): A review of materials, methods, applications and challenges

Tuan D. Ngo et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Engineering, Manufacturing

Interfacial performance and fracture patterns of 3D printed continuous carbon fiber with sizing reinforced PA6 composites

Tengfei Liu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

添加到收藏夹

Review Construction & Building Technology

A review on split Hopkinson bar experiments on the dynamic characterisation of concrete

Mohammad Reza Khosravani et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Polymer Science

Experimental study on the 3D-printed plastic parts and predicting the mechanical properties using artificial neural networks

Omer Bayraktar et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2017)

添加到收藏夹

Article Engineering, Manufacturing

Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites

Xiaoyong Tian et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Elastic and yield behaviors of recycled polypropylene-based composites: Experimental and modeling study

K. Wang et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Impact absorption capacity of 3D-printed components fabricated by fused deposition modelling

A. Tsouknidas et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation

Ryosuke Matsuzaki et al.

SCIENTIFIC REPORTS (2016)

添加到收藏夹

Article Materials Science, Composites

Impact response of recycled polypropylene-based composites under a wide range of temperature: Effect of filler content and recycling

K. Wang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2014)

添加到收藏夹

Article Multidisciplinary Sciences

Experimental investigation and empirical modelling of FDM process for compressive strength improvement

Anoop K. Sood et al.

JOURNAL OF ADVANCED RESEARCH (2012)

添加到收藏夹

Article Engineering, Mechanical

Review of experimental techniques for high rate deformation and shock studies

JE Field et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2004)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Random forests

L Breiman

MACHINE LEARNING (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.