相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。A homogenous solid polymer electrolyte prepared by facile spray drying method is used for room-temperature solid lithium metal batteries
Zehao Zhou et al.
NANO RESEARCH (2023)
Research Article Deciphering the Role of Fluoroethylene Carbonate towards Highly Reversible Sodium Metal Anodes
Xueying Zheng et al.
RESEARCH (2022)
NaF-rich solid electrolyte interphase for dendrite-free sodium metal batteries
Mengyang Xu et al.
ENERGY STORAGE MATERIALS (2022)
Surface-substituted Prussian blue analogue cathode for sustainable potassium-ion batteries
Junmin Ge et al.
NATURE SUSTAINABILITY (2022)
High-Potential Cathodes with Nitrogen Active Centres for Quasi-Solid Proton-Ion Batteries
Dongyang Shen et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)
An organosulfide-based energetic liquid as the catholyte in high-energy density lithium metal batteries for large-scale grid energy storage
Zhengkun Xie et al.
NANO RESEARCH (2022)
A robust interphase via in-situ pre-reconfiguring lithium anode surface for long-term lithium-oxygen batteries
Pan Xu et al.
JOURNAL OF ENERGY CHEMISTRY (2022)
Nitrogen-Doped Amorphous Zn-Carbon Multichannel Fibers for Stable Lithium Metal Anodes
Yongjin Fang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)
A Carbon Foam with Sodiophilic Surface for Highly Reversible, Ultra-Long Cycle Sodium Metal Anode
Xue-Yang Cui et al.
ADVANCED SCIENCE (2021)
3D Ag@C Cloth for Stable Anode Free Sodium Metal Batteries
Hui Wang et al.
SMALL METHODS (2021)
Hierarchical ZnO nanorod arrays grown on copper foam as an advanced three-dimensional skeleton for dendrite-free sodium metal anodes
Wu Yang et al.
NANO ENERGY (2021)
Prospects of Electrode Materials and Electrolytes for Practical Potassium-Based Batteries
Ling Fan et al.
SMALL METHODS (2021)
Recent advances in semimetallic pnictogen (As, Sb, Bi) based anodes for sodium-ion batteries: Structural design, charge storage mechanisms, key challenges and perspectives
Samrat Sarkar et al.
NANO RESEARCH (2021)
Critical effects of electrolyte recipes for Li and Na metal batteries
Xueying Zheng et al.
CHEM (2021)
Enabling high-performance sodium metal anode via a presodiated alloy-induced interphase
Siyuan Liu et al.
CHEMICAL ENGINEERING JOURNAL (2021)
A Lithium-Metal Anode with Ultra-High Areal Capacity (50 mAh cm-2) by Gridding Lithium Plating/Stripping
Pan Xu et al.
ENERGY STORAGE MATERIALS (2021)
A highly reversible sodium metal anode by mitigating electrodeposition overpotential
Pan Xu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2021)
Knocking down the kinetic barriers towards fast-charging and low-temperature sodium metal batteries
Xueying Zheng et al.
ENERGY & ENVIRONMENTAL SCIENCE (2021)
A honeycomb-like nitrogen-doped carbon as high-performance anode for potassium-ion batteries
Junpeng Li et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Designing solid-state electrolytes for safe, energy-dense batteries
Qing Zhao et al.
NATURE REVIEWS MATERIALS (2020)
Embedding a percolated dual-conductive skeleton with high sodiophilicity toward stable sodium metal anodes
Xueying Zheng et al.
NANO ENERGY (2020)
Anodes and Sodium-Free Cathodes in Sodium Ion Batteries
Xuming Yang et al.
ADVANCED ENERGY MATERIALS (2020)
N-doped interconnected carbon aerogels as an efficient SeS2 host for long life Na-SeS2 batteries
Yurui Deng et al.
NANO RESEARCH (2020)
Ultrastable All-Solid-State Sodium Rechargeable Batteries
Jing Yang et al.
ACS ENERGY LETTERS (2020)
Ion-Solvent Chemistry-Inspired Cation-Additive Strategy to Stabilize Electrolytes for Sodium-Metal Batteries
Xiang Chen et al.
CHEM (2020)
High reversible Li plating and stripping by in-situ construction a multifunctional lithium-pinned array
Pan Xu et al.
ENERGY STORAGE MATERIALS (2020)
Solid Electrolyte Interphases on Sodium Metal Anodes
Changyuan Bao et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
3D uniform nitrogen-doped carbon skeleton for ultra-stable sodium metal anode
Ben Liu et al.
NANO RESEARCH (2020)
Interfacial design principle of sodiophilicity-regulated interlayer deposition in a sandwiched sodium metal anode
Xin Jin et al.
ENERGY STORAGE MATERIALS (2020)
Affinity-engineered carbon nanofibers as a scaffold for Na metal anodes
Alessandro Susca et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Advanced carbon nanostructures for future high performance sodium metal anodes
Caiyun Ma et al.
ENERGY STORAGE MATERIALS (2020)
Dendrite-free all-solid-state lithium batteries with lithium phosphorous oxynitride-modified lithium metal anode and composite solid electrolytes
Chunhua Wang et al.
NANO RESEARCH (2019)
Flame-retardant quasi-solid polymer electrolyte enabling sodium metal batteries with highly safe characteristic and superior cycling stability
Jinfeng Yang et al.
NANO RESEARCH (2019)
Stable Na Metal Anode Enabled by a Reinforced Multistructural SEI Layer
Zhixin Xu et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Homogeneous guiding deposition of sodium through main group II metals toward dendrite-free sodium anodes
Mengqi Zhu et al.
SCIENCE ADVANCES (2019)
A stable artificial protective layer for high capacity dendrite-free lithium metal anode
Zhipeng Wen et al.
NANO RESEARCH (2019)
Sustainability-inspired cell design for a fully recyclable sodium ion battery
Tiefeng Liu et al.
NATURE COMMUNICATIONS (2019)
Developments and Perspectives on Emerging High-Energy-Density Sodium-Metal Batteries
Yunxiao Wang et al.
CHEM (2019)
Boosting the Reversibility of Sodium Metal Anode via Heteroatom-Doped Hollow Carbon Fibers
Xueying Zheng et al.
SMALL (2019)
Revealing an Interconnected Interfacial Layer in Solid-State Polymer Sodium Batteries
Chenglong Zhao et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)
A Sodiophilic Interphase-Mediated, Dendrite-Free Anode with Ultrahigh Specific Capacity for Sodium-Metal Batteries
Lei Ye et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)
Mega High Utilization of Sodium Metal Anodes Enabled by Single Zinc Atom Sites
Tingzhou Yang et al.
NANO LETTERS (2019)
Cross-linked beta alumina nanowires with compact gel polymer electrolyte coating for ultra-stable sodium metal battery
Danni Lei et al.
NATURE COMMUNICATIONS (2019)
Binding ZnO nanorods in reduced graphene oxide via facile electrochemical method for Na-ion battery
Mingjun Jing et al.
APPLIED SURFACE SCIENCE (2019)
Atomic layer deposited-ZnO@3D-Ni-foam composite for Na-ion battery anode: A novel route for easy and efficient electrode preparation
Soumyadeep Sinha et al.
CERAMICS INTERNATIONAL (2019)
Prevention of dendrite growth and volume expansion to give high-performance aprotic bimetallic Li-Na alloy-O-2 batteries
Jin-ling Ma et al.
NATURE CHEMISTRY (2019)
Stable Na Plating and Stripping Electrochemistry Promoted by In Situ Construction of an Alloy-Based Sodiophilic Interphase
Shuai Tang et al.
ADVANCED MATERIALS (2019)
Dendrite-tamed deposition kinetics using single-atom Zn sites for Li metal anode
Kangli Xu et al.
ENERGY STORAGE MATERIALS (2019)
Uniform nucleation of sodium in 3D carbon nanotube framework via oxygen doping for long-life and efficient Na metal anodes
Chenxiao Chu et al.
ENERGY STORAGE MATERIALS (2019)
A Chemically Engineered Porous Copper Matrix with Cylindrical Core-Shell Skeleton as a Stable Host for Metallic Sodium Anodes
Chuanlong Wang et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
A robust 3D host for sodium metal anodes with excellent machinability and cycling stability
Wan-Sheng Xiong et al.
CHEMICAL COMMUNICATIONS (2018)
A room-temperature sodium metal anode enabled by a sodiophilic layer
Shuai Tang et al.
NANO ENERGY (2018)
Highly dispersed Zn nanoparticles confined in a nanoporous carbon network: promising anode materials for sodium and potassium ion batteries
Chunliu Yan et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Lightweight, Thin, and Flexible Silver Nanopaper Electrodes for High-Capacity Dendrite-Free Sodium Metal Anodes
Zhaohui Wang et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Honeycomb-like porous 3D nickel electrodeposition for stable Li and Na metal anodes
Yaolin Xu et al.
ENERGY STORAGE MATERIALS (2018)
Porous Al Current Collector for Dendrite-Free Na Metal Anodes
Shan Liu et al.
NANO LETTERS (2017)
Challenges and perspectives on high and intermediate-temperature sodium batteries
Karina B. Hueso et al.
NANO RESEARCH (2017)
Reviving the lithium metal anode for high-energy batteries
Dingchang Lin et al.
NATURE NANOTECHNOLOGY (2017)
Rhombic Dodecahedron ZIF-8 Precursor: Designing Porous N-Doped Carbon for Sodium-Ion Batteries
Yang Liu et al.
CHEMELECTROCHEM (2017)
Stable Na plating/stripping electrochemistry realized by a 3D Cu current collector with thin nanowires
Yanying Lu et al.
CHEMICAL COMMUNICATIONS (2017)
Ammonia-treated porous carbon derived from ZIF-8 for enhanced CO2 adsorption
Xiancheng Ma et al.
APPLIED SURFACE SCIENCE (2016)
A novel synergistic composite with multi-functional effects for high-performance Li-S batteries
Yi-Juan Li et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
NiO-PTA supported on ZIF-8 as a highly effective catalyst for hydrocracking of Jatropha oil
Jing Liu et al.
SCIENTIFIC REPORTS (2016)
Bimetallic Metal-Organic Frameworks for Controlled Catalytic Graphitization of Nanoporous Carbons
Jing Tang et al.
SCIENTIFIC REPORTS (2016)
From Bimetallic Metal-Organic Framework to Porous Carbon: High Surface Area and Multicomponent Active Dopants for Excellent Electrocatalysis
Yu-Zhen Chen et al.
ADVANCED MATERIALS (2015)
Towards greener and more sustainable batteries for electrical energy storage
D. Larcher et al.
NATURE CHEMISTRY (2015)
High-throughput synthesis of zeolitic imidazolate frameworks and application to CO2 capture
Rahul Banerjee et al.
SCIENCE (2008)