相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。In-process stochastic tool wear identification and its application to the improved cutting force modeling of micro milling
Xuewei Zhang et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)
Milling force prediction model based on transfer learning and neural network
Juncheng Wang et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2021)
Milling Force Model for Aviation Aluminum Alloy: Academic Insight and Perspective Analysis
Zhenjing Duan et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2021)
In-situ tool wear area evaluation in micro milling with considering the influence of cutting force
Si Li et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)
Stability analysis of milling process by combining the gyroscopic effect with the symmetry and runout of the cutter
Min Wan et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)
Milling Force Prediction Model for Five-Axis Machining of Freeform Surface Considering Mesoscopic Size Effect
Minglong Guo et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2021)
Cutting force modeling and experimental validation for micro end milling
Weijie Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Physics-informed Bayesian inference for milling stability analysis*
Gengxiang Chen et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)
Stochastic fractal search-optimized multi-support vector regression for remaining useful life prediction of bearings
Yuxiong Li et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2021)
Wiener-based remaining useful life prediction of rolling bearings using improved Kalman filtering and adaptive modification
Yuxiong Li et al.
MEASUREMENT (2021)
A Multilevel Monte Carlo Method for Performing Time-Variant Reliability Analysis
Jian Wang et al.
IEEE ACCESS (2021)
Reliability analysis of chatter stability for milling process system with uncertainties based on neural network and fourth moment method
Congying Deng et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2020)
Reliability assessment with density scanned adaptive Kriging
Rui Teixeira et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)
An adaptive scheme for reliability-based global design optimization: A Markov chain Monte Carlo approach
H. A. Jensen et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)
Failure Evolution Law of Reinforced Anchor System under Pullout Load Based on DIC
Yue Li et al.
ADVANCES IN CIVIL ENGINEERING (2020)
Micro-milling tool wear monitoring under variable cutting parameters and runout using fast cutting force coefficient identification method
Tongshun Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Time-variant reliability analysis using the parallel subset simulation
Weiqi Du et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2019)
Research on the ploughing force in micro milling of soft-brittle crystals
Ni Chen et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Multi harmonic and random stiffness excitation for milling chatter suppression
Chenxi Wang et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)
Experimental research on micro-milling force of a single-crystal nickel-based superalloy
Qi Gao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Conditional optimization of a noisy function using a kriging metamodel
Diarietou Sambakhe et al.
JOURNAL OF GLOBAL OPTIMIZATION (2019)
An efficient Kriging-based subset simulation method for hybrid reliability analysis under random and interval variables with small failure probability
Mi Xiao et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2019)
Performance reliability of jet pipe servo valve under random vibration environment
Yu Wang et al.
MECHATRONICS (2019)
Bayesian inference with Subset Simulation: Strategies and improvements
Wolfgang Betz et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2018)
Bayesian updating of slope reliability in spatially variable soils with in-situ measurements
Shui-Hua Jiang et al.
ENGINEERING GEOLOGY (2018)
Experimental investigations and empirical modeling for optimization of surface roughness and machining time parameters in micro end milling using Genetic Algorithm
S. P. Leo Kumar
MEASUREMENT (2018)
Uncertainty analysis of force coefficients during micromilling of titanium alloy
Erman Gozu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Instantaneous uncut chip thickness modeling for micro-end milling process
Xuewei Zhang et al.
MACHINING SCIENCE AND TECHNOLOGY (2017)
On modeling of cutting forces in micro-end milling operation
Tesfaye M. Moges et al.
MACHINING SCIENCE AND TECHNOLOGY (2017)
Reliability analysis and updating of deteriorating systems with subset simulation
Ronald Schneider et al.
STRUCTURAL SAFETY (2017)
3D Finite Element Simulation of Micro End-Milling by Considering the Effect of Tool Run-Out
Ali Davoudinejad et al.
MICROMACHINES (2017)
On the wavelet analysis of cutting forces for chatter identification in milling
Cesar Giovanni Cabrera et al.
ADVANCES IN MANUFACTURING (2017)
A generic instantaneous undeformed chip thickness model for the cutting force modeling in micromilling
Kexuan Li et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
Speed-varying cutting force coefficient identification in milling
N. Grossi et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2015)
MCMC algorithms for Subset Simulation
Iason Papaioannou et al.
PROBABILISTIC ENGINEERING MECHANICS (2015)
Investigation of machining stability in micro milling considering the parameter uncertainty
Ziyang Cao et al.
ADVANCES IN MECHANICAL ENGINEERING (2015)
Application of Bayesian Inference to Milling Force Modeling
Jaydeep M. Karandikar et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2014)
Tool life prediction using Bayesian updating. Part 2: Turning tool life using a Markov Chain Monte Carlo approach
Jaydeep M. Karandikar et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2014)
Mathematical modelling of chip thickness in micro-end-milling: A Fourier modelling
Y. H. Kang et al.
APPLIED MATHEMATICAL MODELLING (2013)
Probabilistic back analysis of slope failure - A case study in Taiwan
Lei Wang et al.
COMPUTERS AND GEOTECHNICS (2013)
Structural reliability analysis and reliability-based design optimization: Recent advances
Qiu ZhiPing et al.
SCIENCE CHINA-PHYSICS MECHANICS & ASTRONOMY (2013)
Reliability updating in geotechnical engineering including spatial variability of soil
Iason Papaioannou et al.
COMPUTERS AND GEOTECHNICS (2012)
A New Mechanistic Approach for Micro End Milling Force Modeling
Martin B. G. Jun et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2012)
Prediction of milling cutting force coefficients for Aluminum 6082-T4
G. Campatelli et al.
FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012 (2012)
Single Edge Cutting Phenomenon and Instantaneous Uncut Chip Thickness Model of Micro-Ball-End Milling
Zhenyu Han et al.
ADVANCED SCIENCE LETTERS (2011)
Cutting force modeling for flat end milling including bottom edge cutting effect
Jian-Wei Dang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
Bayesian system identification based on probability logic
James L. Beck
STRUCTURAL CONTROL & HEALTH MONITORING (2010)
Modeling of dynamic micro-milling cutting forces
Mohammad Malekian et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
A tutorial on adaptive MCMC
Christophe Andrieu et al.
STATISTICS AND COMPUTING (2008)
Cutting force-based real-time estimation of tool wear in face milling using a combination of signal processing techniques
P. Bhattacharyya et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2007)