4.8 Article

Mechanistic insight into the impact of pre-lithiation on the cycling stability of lithium-ion battery

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Review Chemistry, Applied

Recent progress and perspectives on silicon anode: Synthesis and prelithiation for LIBs energy storage

Yuanxing Zhang et al.

Summary: The ever-increasing environmental/energy crisis and the rapid advancement of mobile devices have directed attention towards promising alternative energy storage and conversion devices. This review summarizes recent progress in the synthetic method of silicon matrix composites and highlights challenges and prospects in silicon anode lithium-ion battery research.

JOURNAL OF ENERGY CHEMISTRY (2022)

Article Chemistry, Multidisciplinary

Li-Rich Li2[Ni0.8Co0.1Mn0.1]O2 for Anode-Free Lithium Metal Batteries

Liangdong Lin et al.

Summary: The lifespan of anode-free lithium metal batteries can be extended by introducing Li-rich Li-2[Ni0.8Co0.1Mn0.1]O-2 into the cathode, resulting in high energy density and capacity retention after 100 cycles under limited electrolyte addition conditions.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Multidisciplinary

The Formation/Decomposition Equilibrium of LiH and its Contribution on Anode Failure in Practical Lithium Metal Batteries

Gaojie Xu et al.

Summary: This study reveals a negative correlation between the accumulation of LiH and the cyclability of practical LMBs. Additionally, a temperature-sensitive equilibrium governing the formation and decomposition process of LiH at the Li anode is identified, providing important insights for efficient Li protection and the ultimate application of LMBs.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Multidisciplinary

Pre-Lithiating SiO Anodes for Lithium-Ion Batteries by a Simple, Effective, and Controllable Strategy Using Stabilized Lithium Metal Powder

Ben Huang et al.

Summary: The researchers proposed a simple and effective pre-lithiation strategy using SST as a relatively stable pre-lithiation reagent to improve SiO anodes, successfully adjusting ICE to 60-120%. Pre-lithiation is considered as an important way to improve ICE and reduce lithium loss.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Article Chemistry, Physical

Prelithiated Li-Enriched Gradient Interphase toward Practical High-Energy NMC-Silicon Full Cell

Xiaoxiao Liu et al.

Summary: This study focuses on high-energy-density lithium-ion batteries using nickel-rich layered oxide cathodes and Si-based anodes. By designing LR-Ni65, excess electrochemically active lithium is provided to compensate for lithium loss at the anode, resulting in improved capacity and cycling stability.

ACS ENERGY LETTERS (2021)

Article Nanoscience & Nanotechnology

A Scalable Cathode Chemical Prelithiation Strategy for Advanced Silicon-Based Lithium Ion Full Batteries

Zongzhe Liu et al.

Summary: This study presents a cathode prelithiation method using Li2S-PAN as a lithium donor, which enhances the initial charge capacity of LiFePO4 electrodes and improves the performance of full-cell systems. The combination with a silicon anode results in higher reversible capacity, enhanced interfacial stability, and improved reaction kinetics in the cells. The proposed cathode prelithiation process shows compatibility with industrial electrode preparation processes, showing promising application prospects.

ACS APPLIED MATERIALS & INTERFACES (2021)

Review Chemistry, Multidisciplinary

Prelithiation: A Crucial Strategy for Boosting the Practical Application of Next-Generation Lithium Ion Battery

Fei Wang et al.

Summary: This review systematically summarizes and analyzes the advantages and challenges of various prelithiation methods, providing enlightenment for the further development of each prelithiation strategy towards commercialization, thus facilitating the practical application of high-specific-capacity anodes in the next-generation high-energy-density lithium-ion batteries.

ACS NANO (2021)

Article Materials Science, Multidisciplinary

From scaled-up production of silicon-graphene nanocomposite to the realization of an ultra-stable full-cell Li-ion battery

Sara Abouali et al.

Summary: A high-performance Li-ion full-cell utilizing a silicon/graphene/carbon (Si/G/C) nanocomposite anodic material and commercial LiNi0.33Mn0.33Co0.33O2 (NMC111) cathode has been developed, exhibiting a high energy density and excellent capacity retention after 300 cycles. The scalability of the Si-based anode synthesis is a promising step towards the commercialization of high-capacity and high-energy density Li-ion batteries.

2D MATERIALS (2021)

Article Chemistry, Multidisciplinary

Achieving Desirable Initial Coulombic Efficiencies and Full Capacity Utilization of Li-Ion Batteries by Chemical Prelithiation of Graphite Anode

Yifei Shen et al.

Summary: A new design strategy for prelithiation solution has been proposed to successfully prelithiate graphite anodes by selecting a suitable solvent to tune the redox potential of prelithiation reagent and prevent solvent co-intercalation. The developed prelithiation solution, lithium biphenylide/2-methyl tetrahydrofuran, accurately prelithiates graphite anodes to the desired state in a few minutes without damaging the lattice structure, leading to significantly improved performance in full cells.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Physical

Dehydrogenation-driven Li metal-free prelithiation for high initial efficiency SiO-based lithium storage materials

Dong Jae Chung et al.

Summary: Research shows that dehydrogenation-driven prelithiation using lithium hydride can significantly improve the initial Coulombic efficiency of silicon monoxide, thereby enhancing the performance of lithium-ion batteries. Silicon monoxide prelithiated through this method exhibits higher capacity and better cycling stability in tests, enabling a significant increase in the energy density of the overall battery system.

NANO ENERGY (2021)

Article Chemistry, Multidisciplinary

Pre-Lithiation Strategies for Next-Generation Practical Lithium-Ion Batteries

Liming Jin et al.

Summary: This progress report outlines the initial active lithium loss issue in next-generation Li-ion batteries and the development, classification, and comparison of various pre-lithiation strategies to address this problem. It also reviews the research progress of pre-lithiation strategies for representative electrochemical systems, discusses current challenges, future perspectives, and aims to provide guidance for research directions tailored for different applications based on the proposed pre-lithiation strategies summaries and comparisons.

ADVANCED SCIENCE (2021)

Article Chemistry, Physical

Robust Solid/Electrolyte Interphase (SEI) Formation on Si Anodes Using Glyme-Based Electrolytes

Guang Yang et al.

Summary: The study demonstrates that glyme-based electrolytes can effectively improve the stability and cycling performance of silicon anodes in lithium-ion batteries, reducing early parasitic current, decreasing interfacial resistance, and promoting capacity retention. Mechanistic investigation shows that GlyEl enriches the SEI on silicon with elastic polyether while diminishing carbonate species, making it a viable option for future high energy density lithium-ion batteries.

ACS ENERGY LETTERS (2021)

Article Chemistry, Physical

Dual-Functional Cathodic Prelithiation Reagent of Li3P in Lithium-Ion Battery for Compensating Initial Capacity Loss and Enhancing Safety

Xiaoyi Wang et al.

Summary: Prelithiation with Li3P is an effective way to compensate initial capacity loss and enhance safety in lithium-ion batteries. Li3P has a high theoretical capacity and low lithiation potential, providing higher initial charge capacity and improving overall energy capacity.

ACS APPLIED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

Weakly Solvating Solution Enables Chemical Prelithiation of Graphite-SiOx Anodes for High-Energy Li-Ion Batteries

Jinkwan Choi et al.

Summary: The initial Coulombic efficiency of the anode is crucial for the energy density of a Li-ion battery, and a blend of graphite and Si/SiOx is the most practical way to balance capacity and cycle life, but its low ICE limits its commercial viability. A chemical prelithiation method can maximize the ICE of the blend anodes, leading to a near-ideal energy density in a full cell.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Review Chemistry, Physical

Promises and Challenges of the Practical Implementation of Prelithiation in Lithium-Ion Batteries

Renming Zhan et al.

Summary: This study discusses the key parameters and issues involved in implementing prelithiation methods in lithium-ion batteries, as well as potential future directions in this emerging field. Further development in prelithiation technology is crucial to enable next-generation high-energy-density LIBs in the near future.

ADVANCED ENERGY MATERIALS (2021)

Article Nanoscience & Nanotechnology

Fast and Controllable Prelithiation of Hard Carbon Anodes for Lithium-Ion Batteries

Xiaoxiao Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Physical

Practical implementation of Li doped SiO in high energy density 21700 cell

Y. Reynier et al.

JOURNAL OF POWER SOURCES (2020)

Article Nanoscience & Nanotechnology

Controlled Prelithiation of SnO2/C Nanocomposite Anodes for Building Full Lithium-Ion Batteries

Feifei Li et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Multidisciplinary

Molecularly Tailored Lithium-Arene Complex Enables Chemical Prelithiation of High-Capacity Lithium-Ion Battery Anodes

Juyoung Jang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Chemistry, Multidisciplinary

Conformal Prelithiation Nanoshell on LiCoO2 Enabling High-Energy Lithium-Ion Batteries

Xiaoxiao Liu et al.

NANO LETTERS (2020)

Article Chemistry, Physical

Prelithiation of silicon/graphite composite anodes: Benefits and mechanisms for long-lasting Li-Ion batteries

Christopher L. Berhaut et al.

ENERGY STORAGE MATERIALS (2020)

Article Electrochemistry

Electrochemical Dilatometry of Si-Bearing Electrodes: Dimensional Changes and Experiment Design

Andressa Y. R. Prado et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Article Electrochemistry

Beneficial Effect of Li5FeO4 Lithium Source for Li-Ion Batteries with a Layered NMC Cathode and Si Anode

Wesley M. Dose et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Article Nanoscience & Nanotechnology

Prelithiated Surface Oxide Layer Enabled High-Performance Si Anode for Lithium Storage

Yuanchao Zhu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Physical

Towards better estimability of electrode-specific state of health: Decoding the cell expansion

Peyman Mohtat et al.

JOURNAL OF POWER SOURCES (2019)

Article Nanoscience & Nanotechnology

Chemical Prelithiation of Negative Electrodes in Ambient Air for Advanced Lithium-Ion Batteries

Gongwei Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Electrochemistry

Communication-Effect of Lower Cutoff Voltage on the 1st Cycle Performance of Silicon Electrodes

Adam Tornheim et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Article Chemistry, Physical

Volume Changes of Graphite Anodes Revisited: A Combined Operando X-ray Diffraction and In Situ Pressure Analysis Study

Simon Schweidler et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

Article Chemistry, Physical

Application of Li2S to compensate for loss of active lithium in a Si-C anode

Yuanjie Zhan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Article Electrochemistry

Probing the Reversibility of Silicon Monoxide Electrodes for Lithium-Ion Batteries

Tian Tan et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Article Chemistry, Physical

Toward High Power Batteries: Pre-lithiated Carbon Nanospheres as High Rate Anode Material for Lithium Ion Batteries

Florian Holtstiege et al.

ACS APPLIED ENERGY MATERIALS (2018)

Article Materials Science, Multidisciplinary

Improving the initial Coulombic efficiency of hard carbon-based anode for rechargeable batteries with high energy density

Xiang Zhang et al.

JOURNAL OF MATERIALS SCIENCE (2017)

Review Chemistry, Physical

Recent advancement of SiOx, based anodes for lithium-ion batteries

Tao Chen et al.

JOURNAL OF POWER SOURCES (2017)

Article Chemistry, Physical

Scalable process for application of stabilized lithium metal powder in Li-ion batteries

Guo Ai et al.

JOURNAL OF POWER SOURCES (2016)

Article Multidisciplinary Sciences

Metallurgically lithiated SiOx anode with high capacity and ambient air compatibility

Jie Zhao et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)

Article Multidisciplinary Sciences

Atomic-scale disproportionation in amorphous silicon monoxide

Akihiko Hirata et al.

NATURE COMMUNICATIONS (2016)

Article Chemistry, Physical

Li3N as a Cathode Additive for High-Energy-Density Lithium-Ion Batteries

Kyusung Park et al.

ADVANCED ENERGY MATERIALS (2016)

Article Chemistry, Multidisciplinary

Li-Metal-Free Prelithiation of Si-Based Negative Electrodes for Full Li-Ion Batteries

Haitao Zhou et al.

CHEMSUSCHEM (2015)

Article Materials Science, Multidisciplinary

Modeling interfaces between solids: Application to Li battery materials

N. D. Lepley et al.

PHYSICAL REVIEW B (2015)

Review Chemistry, Multidisciplinary

Alloy Negative Electrodes for Li-Ion Batteries

M. N. Obrovac et al.

CHEMICAL REVIEWS (2014)

Article Chemistry, Physical

Interweaved Si@C/CNTs&CNFs composites as anode materials for Li-ion batteries

Miao Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

Article Chemistry, Physical

Modified SiO as a high performance anode for Li-ion batteries

Yoon Hwa et al.

JOURNAL OF POWER SOURCES (2013)

Article Chemistry, Multidisciplinary

Size-Dependent Fracture of Silicon Nanoparticles During Lithiation

Xiao Hua Liu et al.

ACS NANO (2012)

Article Chemistry, Multidisciplinary

A Highly Cross-Linked Polymeric Binder for High-Performance Silicon Negative Electrodes in Lithium Ion Batteries

Bonjae Koo et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2012)

Article Nanoscience & Nanotechnology

In situ atomic-scale imaging of electrochemical lithiation in silicon

Xiao Hua Liu et al.

NATURE NANOTECHNOLOGY (2012)

Article Chemistry, Multidisciplinary

Prelithiated Silicon Nanowires as an Anode for Lithium Ion Batteries

Nian Liu et al.

ACS NANO (2011)

Article Chemistry, Analytical

Electrochemical behavior of SiO anode for Li secondary batteries

Jae-Hun Kim et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2011)

Article Chemistry, Multidisciplinary

Amorphous Hierarchical Porous GeOx as High-Capacity Anodes for Li Ion Batteries with Very Long Cycling Life

Xiao-Liang Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)

Article Electrochemistry

Alloy design for lithium-ion battery anodes

M. N. Obrovac et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)

Article Chemistry, Physical

A prelithiated carbon anode for lithium-ion battery applications

C. R. Jarvis et al.

JOURNAL OF POWER SOURCES (2006)

Article Materials Science, Multidisciplinary

Electrochemical characterization of a novel Si-graphite-Li2.6Co0.4N composite as anode material for lithium secondary batteries

Y Liu et al.

MATERIALS CHEMISTRY AND PHYSICS (2005)

Article Chemistry, Physical

Transport properties of hectorite based nanocomposite single ion conductors

RG Singhal et al.

JOURNAL OF POWER SOURCES (2004)