相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Correlating temperature-dependent stacking fault energy and in-situ bulk deformation behavior for a metastable austenitic stainless steel
Benjamin Neding et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Description of anisotropic material response of wire and arc additively manufactured thin-walled stainless steel elements
Nicolas Hadjipantelis et al.
THIN-WALLED STRUCTURES (2022)
Strengthening contributions of dislocations and twins in warm-rolled TWIP steels
Y. Z. Li et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2022)
The combined influence of grain size distribution and dislocation density on hardness of interstitial free steel
Wei Li et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Attenuation and velocity of elastic waves in polycrystals with generally anisotropic grains: Analytic and numerical modeling
G. Sha et al.
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2020)
Line-length-dependent dislocation mobilities in an FCC stainless steel alloy
Ryan B. Sills et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
The Scattering of Phonons by Infinitely Long Quantum Dislocations Segments and the Generation of Thermal Transport Anisotropy in a Solid Threaded by Many Parallel Dislocations
Fernando Lund et al.
NANOMATERIALS (2020)
Dislocation densities and intergranular stresses of plastically deformed austenitic steels
Y. Tomota et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
An analysis of phase stresses in additively manufactured 304L stainless steel using neutron diffraction measurements and crystal plasticity finite element simulations
Reeju Pokharel et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
The interplay between deformation mechanisms in austenitic 304 steel during uniaxial and equibiaxial loading
E. Polatidis et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Stress state-dependent mechanics of additively manufactured 304L stainless steel: Part 2-Characterization and modeling of macroscopic plasticity behavior
Zhuqing Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Scattering of phonons by quantum-dislocation segments in an elastic continuum
Fernando Lund et al.
PHYSICAL REVIEW B (2019)
Mechanical response of stainless steel subjected to biaxial load path changes: Cruciform experiments and multi-scale modeling
Manas V. Upadhyay et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
A Continuum Deformation Model for Steel Coated with Nanolaminate Metallic Systems
Mohammed H. Anazi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Linear Versus Nonlinear Acoustic Probing of Plasticity in Metals: A Quantitative Assessment
Carolina Espinoza et al.
MATERIALS (2018)
In situ monitoring of dislocation proliferation during plastic deformation using ultrasound
Vicente Salinas et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Influence of Temperature on Mechanical Properties, Fracture Morphology and Strain Hardening Behavior of a 304 Stainless Steel
Guilherme Correa Soares et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2017)
Microstructure-tensile property correlation in 304 stainless steel after cold deformation and austenite reversion
P. Mallick et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
In Situ Neutron Diffraction Study of the Influence of Microstructure on the Mechanical Response of Additively Manufactured 304L Stainless Steel
D. W. Brown et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
A review on the strain rate dependency of the dynamic viscoplastic response of FCC metals
Francisco C. Salvado et al.
PROGRESS IN MATERIALS SCIENCE (2017)
In-situ neutron diffraction during biaxial deformation
S. Van Petegem et al.
ACTA MATERIALIA (2016)
The α-factor in the Taylor flow-stress law in monotonic, cyclic and quasi-stationary deformations: Dependence on slip mode, dislocation arrangement and density
Hael Mughrabi
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2016)
Slip activities in polycrystals determined by coupling DIC measurements with crystal plasticity calculations
Adrien Guery et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Improved tensile properties of a new aluminum alloy for high pressure die casting
Peng Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Mechanical properties of Austenitic Stainless Steel 304L and 316L at elevated temperatures
Raghuram Karthik Desu et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2016)
An experimental study of the polycrystalline plasticity of austenitic stainless steel
Fabio Di Gioacchino et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
The Use of Ultrasound to Measure Dislocation Density
Felipe Barra et al.
JOM (2015)
Orientation-dependent evolution of the dislocation density in grain populations with different crystallographic orientations relative to the tensile axis in a polycrystalline aggregate of stainless steel
Tamas Ungar et al.
ACTA MATERIALIA (2014)
In situ X-ray microdiffraction study of deformation-induced phase transformation in 304 austenitic stainless steel
N. Li et al.
ACTA MATERIALIA (2014)
Mechanical properties and corrosion behaviour of nanocrystalline Ti-5Ta-1.8Nb alloy produced by cryo-rolling
Pragna Bhaskar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Real time correlation between flow stress and dislocation density in steel during deformation
Ling Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Elastic constants of austenitic stainless steel: Investigation by the first-principles calculations and the artificial neural network approach
Kamel Benyelloul et al.
COMPUTATIONAL MATERIALS SCIENCE (2013)
Ultrasound as a probe of dislocation density in aluminum
Nicolas Mujica et al.
ACTA MATERIALIA (2012)
Connection between deformation-induced dislocation substructures and martensite formation in stainless steel
Arpan Das et al.
PHILOSOPHICAL MAGAZINE LETTERS (2011)
A perspective on trends in multiscale plasticity
David L. McDowell
INTERNATIONAL JOURNAL OF PLASTICITY (2010)
Dislocation evolution in 316L stainless steel subjected to uniaxial ratchetting deformation
Guozheng Kang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Interaction between elastic waves and prismatic dislocation loops
Natalia Rodriguez et al.
JOURNAL OF APPLIED PHYSICS (2009)
Observations on the definition of yield stress
R. M. Christensen
ACTA MECHANICA (2008)
Microstructure and strength of severely deformed fcc metals
J. Gubicza et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Interaction between an elastic wave and a single pinned dislocation
A Maurel et al.
PHYSICAL REVIEW B (2005)
Wave propagation through a random array of pinned dislocations: Velocity change and attenuation in a generalized Granato and Lucke theory
A Maurel et al.
PHYSICAL REVIEW B (2005)
Real-time ultrasonic measurement during tensile testing of aluminum alloys
XH Min et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Determination of elastic, anelastic, and piezoelectric coefficients of piezoelectric materials from a single specimen by acoustic resonance spectroscopy
H Ogi et al.
ULTRASONICS (2004)
Ultrasonic attenuation due to grain boundary scattering in copper and copper-aluminum
XG Zhang et al.
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2004)
Scattering of an elastic wave by a single dislocation
A Maurel et al.
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2004)
Single-crystal elastic constants of Fe-15Ni-15Cr alloy
A Teklu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)
Complete mode identification for resonance ultrasound spectroscopy
H Ogi et al.
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2002)
Ultrasonic attenuation peak during fatigue of polycrystalline copper
M Hirao et al.
ACTA MATERIALIA (2000)
分享论文
