4.7 Article

Numerical prediction of {1122}(1123) compression twin activation in commercially pure titanium under uniaxial tension

出版社

ELSEVIER SCIENCE SA
DOI: 10.1016/j.msea.2022.143302

关键词

CP-Ti; HCP; EBSD; Twin; Crystal plasticity; Slip operation factor

资金

  1. JSPS KAKENHI [19K04983, 22K04666]
  2. Iron and Steel Institute of Japan
  3. Grants-in-Aid for Scientific Research [19K04983] Funding Source: KAKEN

向作者/读者索取更多资源

In this study, the criteria for {1122} compression twinning in commercially pure titanium (CP-Ti) were investigated. It was found that the dominant active twin system was {1122} compression twin, primarily activated through prismatic slip. Considering plastic deformation allowed for accurate prediction of twinning positions. The study revealed that hydrostatic pressure and resolved shear stress (RSS) may be potential criteria for {1122} twinning.
In this study, the criteria for {1122} compression twinning in commercially pure titanium (CP-Ti) were investigated by uniaxial tensile tests, crystal plasticity finite element (CPFE) analyses, and slip operation factor (SOF) calculations. First, the aggregates of the [0001] axes of CP-Ti were inclined in the rolling direction (RD), implying its RD-split texture. The development of the crystal orientation distribution with deformation was observed by electron back-scattered diffraction (EBSD). Active slip systems were identified by kernel average misorientation (KAM) and intergranular misorientation axis (IGMA) analyses. The dominant slip system was prismatic , whereas the non-prismatic slip systems were activated near the grain boundary. Active twin systems were also identified by the rotation angles of the [0001] axes between the twin and matrix. The dominant active twin system was the {1122} compression twin, although a uniaxial tensile load was applied. Second, the positions of {1122} twinning were predicted by CPFE analysis using the resolved shear stress (RSS) criterion while considering plastic deformation. SOF analysis was also employed for the prediction. The CPFE and SOF analyses yielded almost the same level of prediction accuracy. However, these calculations do not completely predict the twinning positions. Finally, the criteria for {1122} twinning were discussed, and it was revealed that hydrostatic pressure and RSS are possible criteria for {1122} twinning in the continuum model.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.7
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据