☆ 4.7 Article

In-situ synchrotron X-ray analysis of metal Additive Manufacturing: Current state, opportunities and challenges

MATERIALS & DESIGN (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Industrial

In situ X-ray and thermal imaging of refractory high entropy alloying during laser directed deposition

Hui Wang et al.

Summary: In this study, MoNbTiV high-entropy alloy was in situ alloyed with laser power-blown directed energy deposition using a mixture of elemental powders of Mo, Nb, Ti, and V. High-speed synchrotron X-ray imaging and infrared imaging were used to provide a fundamental understanding of the alloying process. Differences in particle delivery velocities and residence times of different elemental powders were observed, with Mo powders showing the longest residence time. Porosity induced by unmelted particles and entrapped gas was observed during the alloying process, with Mo powders resulting in the most unmelted particles. Emissivity of the melt pool, changes in thermal properties, and melt pool morphology during alloying were also investigated with the assistance of an infrared camera.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

An Updated Index Including Toughness for Hot-Cracking Susceptibility

Guannan Tang et al.

Summary: Hot cracking is a major defect in laser-based additive manufacturing. This study presents a new criterion for hot-cracking initiation by estimating the volume change brought by thermal deformation and combining it with the intergranular volume change induced by grain growth and liquid backflow. Experimental data shows that hot-cracking susceptibility is strongly correlated with material high-temperature toughness.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2022)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

Application of Synchrotron X-Ray Imaging and Diffraction in Additive Manufacturing: A Review

Naying An et al.

Summary: Additive manufacturing (AM) is a rapid prototyping technology that economically fabricates complex components, but internal defects pose a challenge. Synchrotron X-ray technology can accurately characterize the internal defect characteristics and mechanical properties of AM parts.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

In Situ Analysis of Laser Powder Bed Fusion Using Simultaneous High-Speed Infrared and X-ray Imaging

Benjamin Gould et al.

Summary: This study presents a new technique that synchronizes high-speed X-ray imaging with high-speed infrared imaging to study laser powder bed fusion processes in real time. The paired observation of multiple phenomena, including three-dimensional melt pool visualization, vapor plume dynamics, spatter formation, thermal history, and point cooling rates, is critical for understanding the fundamentals of laser powder bed fusion and the overall impact of process parameters on print quality.

JOM (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Mechanistic models for additive manufacturing of metallic components

H. L. Wei et al.

Summary: This article discusses the application of additive manufacturing (AM) in the manufacturing of metallic components, focusing on the factors that affect the microstructure, properties, and defects of components and the corresponding model predictions. The critical review of the application of transport phenomena models in AM studies is provided, and opportunities for future research are identified.

PROGRESS IN MATERIALS SCIENCE (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Exploring Structural Changes, Manufacturing, Joining, and Repair of Intermetallic γ-TiAl-Based Alloys: Recent Progress Enabled by In Situ Synchrotron X-Ray Techniques

Petra Spoerk-Erdely et al.

Summary: Intermetallic gamma-TiAl-based alloys are promising materials for lightweight high-temperature applications, and have been successfully used in the automotive and aircraft engine industries. The development of these complex multiphase alloys has greatly benefited from (in situ) X-ray scattering and diffraction techniques.

ADVANCED ENGINEERING MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study of Powder Gas Entrapment and Its Effects on Porosity in 17-4 PH Stainless Steel Parts Fabricated in Laser Powder Bed Fusion

Ziheng Wu et al.

Summary: This study investigated the effects of entrapped gas in powders on porosity rates in fabricated parts and found a strong correlation between porosity in powders and the builds made from those powders. A threshold value was developed to classify powder-induced porosity based on pore morphology measured using computed tomography, and the transfer and coalescence of pores during laser melting was observed directly with dynamic x-ray radiography.

JOM (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

In-situ Observations of Directed Energy Deposition Additive Manufacturing Using High-Speed X-ray Imaging

Sarah J. Wolff et al.

Summary: Interactions among the laser beam, particle flow, and melt pool in laser-based directed energy deposition additive manufacturing were studied using two separate DED systems with different powder flow rates. The experiments showed that increased powder flow rates resulted in less laser absorption into the melt pool and increased particle velocities, leading to a decrease in melting times and a greater propensity for porosity formation. Understanding these interactions at various scales of the DED process will enable flexibility, control, and new materials development in DED-based additive manufacturing.

JOM (2021)

添加到收藏夹

Article Chemistry, Physical

In situ synchrotron X-ray imaging and mechanical properties characterization of additively manufactured high-entropy alloy composites

Jonathan W. Pegues et al.

Summary: The study utilized laser beam directed energy deposition to explore the composition space of a graded W-x(CoCrFeMnNi)(100-x) sample and found the formation of the Fe7W6 intermetallic phase and non-incorporated W particles at certain concentrations.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

In situ X-ray quantification of melt pool behaviour during directed energy deposition additive manufacturing of stainless steel

Yunhui Chen et al.

Summary: The study on the Directed Energy Deposition Additive Manufacturing (DED-AM) of SS316L using in situ and operando synchrotron X-ray imaging provides insights on the surface roughness of DED-AM builds, which can be caused by melt pool surface perturbations due to changes in melt flow and build stage motion. Process maps are developed to quantitatively correlate build quality to process parameters, clarifying how AM process parameters control build efficacy.

MATERIALS LETTERS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Correlative Synchrotron X-ray Imaging and Diffraction of Directed Energy Deposition Additive Manufacturing

Yunhui Chen et al.

Summary: The study revealed the governing mechanistic behaviour and microstructural evolution during Directed Energy Deposition Additive Manufacturing (DED-AM) using unique imaging and diffraction techniques, enhancing the understanding of solidification process and stress development in the alloy.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

In Situ Observation of γ′ Phase Transformation Dynamics During Selective Laser Melting of CMSX-4

Benjamin Wahlmann et al.

Summary: The study reports on the precipitation and dissolution of the gamma ' phase in the Ni-base superalloy CMSX-4 during selective laser melting, investigated using in situ SAXS and WAXS techniques. Different beam scanning strategies, laser power, and scanning speed were found to have a considerable effect on the phase transformation dynamics.

ADVANCED ENGINEERING MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Achieving homogeneity in a high-Fe β-Ti alloy laser-printed from blended elemental powders

Farheen F. Ahmed et al.

Summary: This study investigates the in-situ alloying and microstructure evolution during Selective Laser Melting with Blended Elemental powders. It is found that full alloying and consistent microstructures require further thermal cycling in the heat-affected zone.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Universal scaling laws of keyhole stability and porosity in 3D printing of metals

Zhengtao Gan et al.

Summary: Identifying scaling laws in metal 3D printing is crucial for process optimization and materials development. By using high-speed synchrotron X-ray imaging and multiphysics modeling, the authors report scaling laws to quantify the correlation between process parameters, keyhole stability, and pore formation.

NATURE COMMUNICATIONS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Internal Stress Evolution and Subsurface Phase Transformation in Titanium Parts Manufactured by Laser Powder Bed Fusion-An In Situ X-Ray Diffraction Study

Felix Schmeiser et al.

Summary: The study investigates the phase transformation and internal stress of commercially pure titanium parts made with laser powder bed fusion, showing that a combination of low laser power and scanning speed leads to a more uniform stress distribution in the observed gauge volumes. As the part height increases during the manufacturing process, a stress maximum is formed below the part surface, extending into deeper layers with increasing laser power.

ADVANCED ENGINEERING MATERIALS (2021)

添加到收藏夹

Article Engineering, Manufacturing

In situ X-ray imaging of pore formation mechanisms and dynamics in laser powder-blown directed energy deposition additive manufacturing

Sarah J. Wolff et al.

Summary: Directed energy deposition additive manufacturing is gaining attention for its applications in repair, remanufacturing, and fabrication of functionally graded structures. Understanding porosity formation mechanisms, especially related to the interactions between the delivered powder and melt pool, is crucial for DED AM part quality. High-speed X-ray imaging reveals four types of pore formation mechanisms unique to the laser-based, powder-blown DED process, providing insights for porosity mitigation and control.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)

添加到收藏夹

Article Chemistry, Physical

In-Situ Characterization of Pore Formation Dynamics in Pulsed Wave Laser Powder Bed Fusion

S. Mohammad H. Hojjatzadeh et al.

Summary: The study identified mechanisms of pore formation during pulsed wave LPBF, including vapor depression collapse and rapid melt pool solidification leading to cavity formation. These findings may guide the development of approaches to eliminate pores.

MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

The causal relationship between melt pool geometry and energy absorption measured in real time during laser-based manufacturing

Brian J. Simonds et al.

Summary: This study investigates laser absorption during laser powder bed fusion additive manufacturing by monitoring laser backscattered intensity and X-ray imaging. Laser absorption strongly reflects the stability of the vapor depression, oxygen content, and presence of powder, and may lead to reduced absorption and porosity during scanning. The findings suggest the potential of using a total backscattered light detection system for real-time process control.

APPLIED MATERIALS TODAY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Operando X-ray diffraction during laser 3D printing

Samy Hocine et al.

MATERIALS TODAY (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

S&x1d538;&x1d544;PLE: A Software Suite to Predict Consolidation and Microstructure for Powder Bed Fusion Additive Manufacturing

Matthias Markl et al.

ADVANCED ENGINEERING MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Optimal Design for Metal Additive Manufacturing: An Integrated Computational Materials Engineering (ICME) Approach

S. Amir H. Motaman et al.

JOM (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Analysis of cyclic phase transformations during additive manufacturing of hardenable tool steel by in-situ X-ray diffraction experiments

Jeremy Epp et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Subsurface Cooling Rates and Microstructural Response during Laser Based Metal Additive Manufacturing

Vivek Thampy et al.

SCIENTIFIC REPORTS (2020)

添加到收藏夹

Article Engineering, Manufacturing

Direct observation of pore formation mechanisms during LPBF additive manufacturing process and high energy density laser welding

S. Mohammad H. Hojjatzadeh et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2020)

添加到收藏夹

Article Instruments & Instrumentation

A laser powder bed fusion system for in situ x-ray diffraction with high-energy synchrotron radiation

Eckart Uhlmann et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Modeling and Simulation of Microstructure Evolution for Additive Manufacturing of Metals: A Critical Review

Carolin Koerner et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cooling dynamics of two titanium alloys during laser powder bed fusion probed with in situ X-ray imaging and diffraction

Nicholas P. Calta et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

In-situ Synchrotron imaging of keyhole mode multi-layer laser powder bed fusion additive manufacturing

Yunhui Chen et al.

APPLIED MATERIALS TODAY (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Critical instability at moving keyhole tip generates porosity in laser melting

Cang Zhao et al.

SCIENCE (2020)

添加到收藏夹

Proceedings Paper Engineering, Multidisciplinary

Melt pool morphology in directed energy deposition additive manufacturing process

Y. Chen et al.

INTERNATIONAL CONFERENCE ON MODELLING OF CASTING, WELDING AND ADVANCED SOLIDIFICATION PROCESSES (MCWASP XV) (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

In situ/operando synchrotron x-ray studies of metal additive manufacturing

Tao Sun et al.

MRS BULLETIN (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging

Ross Cunningham et al.

SCIENCE (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel

Hahn Choo et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Dynamics of pore formation during laser powder bed fusion additive manufacturing

Aiden A. Martin et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Laser-Induced Keyhole Defect Dynamics during Metal Additive Manufacturing

Andrew M. Kiss et al.

ADVANCED ENGINEERING MATERIALS (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Microstructure evolution during selective laser melting of metallic materials: A review

Xing Zhang et al.

JOURNAL OF LASER APPLICATIONS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Growth and coarsening kinetics of gamma prime precipitates in CMSX-4 under simulated additive manufacturing conditions

Benjamin Wahlmann et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

The effect of powder oxidation on defect formation in laser additive manufacturing

Chu Lun Alex Leung et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ultrafast dynamics of laser-metal interactions in additive manufacturing alloys captured by in situ X-ray imaging

Aiden A. Martin et al.

MATERIALS TODAY ADVANCES (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

In situ synchrotron X-ray imaging of 4140 steel laser powder bed fusion

Andrew Bobel et al.

MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Transient dynamics of powder spattering in laser powder bed fusion additive manufacturing process revealed by in-situ high-speed high-energy x-ray imaging

Qilin Guo et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

Additive manufacturing of metallic components - Process, structure and properties

T. DebRoy et al.

PROGRESS IN MATERIALS SCIENCE (2018)

添加到收藏夹

Article Instruments & Instrumentation

An instrument for in situ time-resolved X-ray imaging and diffraction of laser powder bed fusion additive manufacturing processes

Nicholas P. Calta et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing

Chu Lun Alex Leung et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Revealing particle-scale powder spreading dynamics in powder-bed-based additive manufacturing process by high-speed x-ray imaging

Luis Escano et al.

SCIENTIFIC REPORTS (2018)

添加到收藏夹

Article Instruments & Instrumentation

Ultrafast X-ray imaging of laser-metal additive manufacturing processes

Niranjan D. Parab et al.

JOURNAL OF SYNCHROTRON RADIATION (2018)

添加到收藏夹

Article Instruments & Instrumentation

PETRA IV: the ultralow-emittance source project at DESY

Christian G. Schroer et al.

JOURNAL OF SYNCHROTRON RADIATION (2018)

添加到收藏夹

Article Engineering, Mechanical

Multiaxial fatigue behavior of wrought and additive manufactured Ti-6Al-4V including surface finish effect

Ali Fatemi et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

添加到收藏夹

Article Engineering, Mechanical

Fatigue life of additively manufactured Ti-6Al-4V in the very high cycle fatigue regime

J. Guenther et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

An in situ USAXS-SAXS-WAXS study of precipitate size distribution evolution in a model Ni-based alloy

Ross N. Andrews et al.

JOURNAL OF APPLIED CRYSTALLOGRAPHY (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Analyzing the effects of powder and post-processing on porosity and properties of electron beam melted Ti-6Al-4V

Ross Cunningham et al.

MATERIALS RESEARCH LETTERS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

An improved prediction of residual stresses and distortion in additive manufacturing

T. Mukherjee et al.

COMPUTATIONAL MATERIALS SCIENCE (2017)

添加到收藏夹

Proceedings Paper Engineering, Industrial

State-of-the-art Laser Additive Manufacturing for Hot-work Tool Steels

Fritz Klocke et al.

MANUFACTURING SYSTEMS 4.0 (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Powder bed charging during electron-beam additive manufacturing

Zachary C. Cordero et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Additive manufacturing of metals

Dirk Herzog et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Review Materials Science, Multidisciplinary

Additive manufacturing of metallic components by selective electron beam melting - a review

C. Koerner

INTERNATIONAL MATERIALS REVIEWS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Overview of Materials Qualification Needs for Metal Additive Manufacturing

Mohsen Seifi et al.

JOM (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Grain structure evolution in Inconel 718 during selective electron beam melting

H. Helmer et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles

Michael Cloots et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Solution Heat Treatment of the Single Crystal Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting

Markus Ramsperger et al.

ADVANCED ENGINEERING MATERIALS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Comparison of Residual Stresses in Inconel 718 Simple Parts Made by Electron Beam Melting and Direct Laser Metal Sintering

L. M. Sochalski-Kolbus et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)

添加到收藏夹

Article Engineering, Manufacturing

Residual stress and distortion modeling of electron beam direct manufacturing Ti-6Al-4V

Erik R. Denlinger et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2015)

添加到收藏夹

Proceedings Paper Optics

Large-Area Kapton X-ray Windows

M. Antimonov et al.

ADVANCES IN X-RAY/EUV OPTICS AND COMPONENTS X (2015)

添加到收藏夹

Review Materials Science, Multidisciplinary

Quantitative X-ray tomography

E. Maire et al.

INTERNATIONAL MATERIALS REVIEWS (2014)

添加到收藏夹

Article Engineering, Industrial

Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing

Wayne E. King et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)

添加到收藏夹

Article Engineering, Mechanical

On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance

S. Lenders et al.

INTERNATIONAL JOURNAL OF FATIGUE (2013)

添加到收藏夹

Review Materials Science, Multidisciplinary

Initiation and growth mechanisms for weld solidification cracking

N. Coniglio et al.

INTERNATIONAL MATERIALS REVIEWS (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

A low-background-intensity focusing small-angle X-ray scattering undulator beamline

Nigel M. Kirby et al.

JOURNAL OF APPLIED CRYSTALLOGRAPHY (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Quantitative Characterization of Precipitate Microstructures in Metallic Alloys Using Small-Angle Scattering

Alexis Deschamps et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

In Situ Experiments with Synchrotron High-Energy X-Rays and Neutrons

Peter Staron et al.

ADVANCED ENGINEERING MATERIALS (2011)

添加到收藏夹

Article Instruments & Instrumentation

Multipurpose furnace for in situ studies of polycrystalline materials using synchrotron radiation

Hemant Sharma et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2009)

添加到收藏夹

Article Engineering, Manufacturing

Electron beam sintering of metal powder

J. Milberg et al.

PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2008)

添加到收藏夹

Article Instruments & Instrumentation

Windows for small-angle X-ray scattering cryostats

Laurence Lurio et al.

JOURNAL OF SYNCHROTRON RADIATION (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

The influence of phase transformations on residual stresses induced by the welding process - 3D and 2D numerical models

P Ferro et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2006)

添加到收藏夹

Article Engineering, Mechanical

Residual stresses in selective laser sintering and selective laser melting

Peter Mercelis et al.

RAPID PROTOTYPING JOURNAL (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Sintering of commercially pure titanium powder with a Nd:YAG laser source

P Fischer et al.

ACTA MATERIALIA (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.