相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。On-line prediction of ultrasonic elliptical vibration cutting surface roughness of tungsten heavy alloy based on deep learning
Yanan Pan et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2022)
3-DOF ultrasonic elliptical vibration tool holder based on coupled resonance modes for manufacturing micro-groove
Rendi Kurniawan et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2021)
Structural transition and ductility enhancement of a tungsten heavy alloy under high pressure
Linmao Qian et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2021)
Generation mechanism of irregular microstructures on the machined surface in single-point diamond turning
Yanbing Chen et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
A comparative study on tool life and wear of uncoated and coated cutting tools in turning of tungsten heavy alloys
Qinqiang Wang et al.
WEAR (2021)
A study on strengthening and machining integrated ultrasonic peening drilling of Ti-6Al-4V
Yihang Liu et al.
MATERIALS & DESIGN (2021)
Effect of ZrB2 addition on microstructure evolution and mechanical properties of 93 wt.% tungsten heavy alloys
Zhi-Bo Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
The effect of hot rolling on the strength and fracture toughness of 90W-7Ni3Fe tungsten heavy metal alloys
M. E. Alam et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Nanometric cutting mechanism of silicon carbide
Jinshi Wang et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2021)
Finite Element Analysis in Ultrasonic Elliptical Vibration Cutting (UEVC) During Micro-Grooving in AISI 1045
Rendi Kurniawan et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2021)
Delamination formation and suppression during rotary ultrasonic elliptical machining of CFRP
Daxi Geng et al.
COMPOSITES PART B-ENGINEERING (2020)
Effect of laser texturing on the performance of ultra-hard single-point cutting tools
Priyanka Ghosh et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Fundamental study of ductile-regime diamond turning of single crystal gallium arsenide
Junyun Chen et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2020)
Elucidating the dual role of grain boundaries as dislocation sources and obstacles and its impact on toughness and brittle-to-ductile transition
Jens Reiser et al.
SCIENTIFIC REPORTS (2020)
Influence of vibration parameters on ultrasonic elliptical vibration cutting of reaction-bonded silicon carbide
La Han et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Subsurface damage and phase transformation in laser-assisted nanometric cutting of single crystal silicon
Xiao Chen et al.
MATERIALS & DESIGN (2020)
Effect of ultrasonic elliptical vibration assistance on the surface layer defect of M-plane sapphire in microcutting
Yinhui Wang et al.
MATERIALS & DESIGN (2020)
Review of hybrid methods and advanced technologies for in-process metrology in ultra-high-precision single-point diamond turning
Shahrokh Hatefi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Brittle-ductile transition temperature of recrystallized tungsten following exposure to fusion relevant cyclic high heat load
V Shah et al.
JOURNAL OF NUCLEAR MATERIALS (2020)
Sintering densification behavior and kinetic mechanism of nano-tungsten powder prepared by sol-spray drying
Zhi-Yuan Du et al.
TUNGSTEN (2020)
Experimental and analytical study of ultrasonic elliptical vibration cutting on AISI 1045 for sustainable machining of round-shaped microgroove pattern
Rendi Kurniawan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Microstructure and mechanical properties of spark plasma sintered tungsten heavy alloys
N. Senthilnathan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
The brittle-ductile transition of tungsten single crystals at the micro-scale
J. Ast et al.
MATERIALS & DESIGN (2018)
Development of a two-frequency, elliptical-vibration texturing device for surface texturing
Rendi Kurniawan et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2017)
Temperature insensitivity of the flow stress in body-centered cubic micropillar crystals
Yinan Cui et al.
ACTA MATERIALIA (2016)
Unraveling the temperature dependence of the yield strength in single-crystal tungsten using atomistically-informed crystal plasticity calculations
David Cereceda et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Cold rolled tungsten (W) plates and foils: Evolution of the microstructure
Simon Bonk et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2016)
Fabrication, characterization, and mechanical properties of 93W-4.9Ni-2.1Fe/95W-2.8Ni-1.2Fe-1Al2O3 heavy alloy composites
Ke Hu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Tensile mechanical properties and fracture behavior of tungsten heavy alloys at 25-1100 °C
Xing Gong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Study on manufacturing of W-Cu alloy thin wall parts by selective laser melting
Changhui Song et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Microstructural evolution and grain refinement mechanism of pure tungsten under explosive loading condition
Fuchi Wang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2014)
Effect of material microstructure and tool geometry on surface generation in single point diamond turning
M. Tauhiduzzaman et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2014)
Wear behavior of natural diamond tool in cutting tungsten-based alloy
Yuanliang Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Brittle-ductile transition during diamond turning of single crystal silicon carbide
Saurav Goel et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
Property change of advanced tungsten alloys due to neutron irradiation
Makoto Fukuda et al.
JOURNAL OF NUCLEAR MATERIALS (2013)
Recent progress in research on tungsten materials for nuclear fusion applications in Europe
M. Rieth et al.
JOURNAL OF NUCLEAR MATERIALS (2013)
Thermo-chemical wear model and worn tool shapes for single-crystal diamond tools cutting steel
B. M. Lane et al.
WEAR (2013)
Dislocation density-based modeling of subsurface grain refinement with laser-induced shock compression
Hongtao Ding et al.
COMPUTATIONAL MATERIALS SCIENCE (2012)
Tungsten as material for plasma-facing components in fusion devices
V. Philipps
JOURNAL OF NUCLEAR MATERIALS (2011)
Controlling Radiation Damage
Graeme Ackland
SCIENCE (2010)
Performance of cutting tools in machining Cu/W alloys for application in EDM electrodes
J. P. Davim et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2009)
Investigation of tungsten and beryllium behaviour under short transient events
G. Pintsuk et al.
FUSION ENGINEERING AND DESIGN (2007)
Influence of recrystallization on thermal shock resistance of various tungsten grades
I. Uytdenhouwen et al.
JOURNAL OF NUCLEAR MATERIALS (2007)
Strain-rate dependence of the brittle-to-ductile transition temperature in tungsten
A. Giannattasio et al.
PHILOSOPHICAL MAGAZINE (2007)
Elliptical vibration cutting of tungsten alloy molds for optical glass parts
N. Suzuki et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2007)
A non-singular continuum theory of dislocations
W Cai et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2006)
Multiscale dislocation dynamics analyses of laser shock peening in silicon single crystals
G. J. Cheng et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2006)
Mobility laws in dislocation dynamics simulations
W Cai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)