4.7 Article

Modeling the mechanical properties of polypropylene/lignin/flax hybrid composites

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Composites

A novel hybrid polyurethane composites with ZnO particles and sheath palm residues: Synergistic effect

Noelle C. Zanini et al.

Summary: This study developed hybrid PU composites filled with ZnO and palm sheath residues, evaluating the impact of fiber loading on various properties. Results showed that the hybrid PU composite with 20 wt% of palm fiber yielded the best results, demonstrating the reinforcement effect of environmentally friendly materials in PU foams.

POLYMER COMPOSITES (2021)

Article Polymer Science

Effect of various organic fibers on the stiffness, strength and impact resistance of polypropylene; a comparison

Robert Vardai et al.

Summary: Composites were prepared from a polypropylene homopolymer and four types of organic fibers, showing significant improvements in deformability and fracture resistance with PET and PVA fibers compared to traditional stiff fibers. Local deformation processes can be tracked by acoustic emission testing.

POLYMER INTERNATIONAL (2021)

Article Polymer Science

Structural biomaterials engineered from lignocellulosic agricultural waste

Zoltan Karpati et al.

Summary: The addition of milled sunflower husk to polyolefins coupled with maleic anhydride-grafted polyolefin agents significantly improves interfacial adhesion, but at high filler content, the elongation-at-break values are very small, posing a major obstacle for practical applications.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Article Materials Science, Multidisciplinary

Biomimetic approaches towards lightweight composite structures for car interior parts

Katrin Greta Hoffmann et al.

Summary: Natural fibre-reinforced plastic composites made from fleeces and felts are commonly used in automotive interior parts due to their good density specific mechanical properties and low carbon footprint. By employing a biomimetic technology-pull approach, natural fibre-reinforced polypropylene plates with improved lightweight potential were produced, with the best results achieved using a sandwich structure surrounding a needle felt core.

MATERIALS & DESIGN (2021)

Article Polymer Science

Polypropylene hybrid composites: Effect of reinforcement of sisal and carbon fibre on mechanical, thermal and morphological properties

Jyoti Agarwal et al.

Summary: Polypropylene (PP)/sisal fibre (SF)/carbon fibre (CF) hybrid composites were prepared using a melt blending process, with varying ratios of CF to SF. The addition of 20 wt% CF, 10 wt% SF, and 5 wt% MgP resulted in significantly improved mechanical performance and impact strength compared to PP/SF composites.

JOURNAL OF POLYMER ENGINEERING (2021)

Article Polymer Science

Improvement of the impact resistance of natural fiber-reinforced polypropylene composites through hybridization

Robert Vardai et al.

Summary: PP hybrid composites prepared by combining natural reinforcements and PET fibers exhibit good overall performance, with different types of natural fibers working together with PET fibers to improve impact resistance, increased strength through enhanced interfacial adhesion from coupling agents, and controlled amounts of PET fibers improving tensile and impact properties.

POLYMERS FOR ADVANCED TECHNOLOGIES (2021)

Article Materials Science, Characterization & Testing

Effect of fiber attrition, particle characteristics and interfacial adhesion on the properties of PP/sugarcane bagasse fiber composites

Andras Bartos et al.

Summary: PP/sugarcane bagasse fiber composites were prepared by injection molding using two fractions of fibers with different particle characteristics, and their mechanical properties, local deformation processes, and interfacial adhesion were studied. The coupling can considerably improve interfacial adhesion and strength of the composites. Fiber fracture consumes energy, leading to an increase in impact resistance.

POLYMER TESTING (2021)

Article Engineering, Multidisciplinary

Ionic liquid-modified lignin as a bio-coupling agent for natural fiber-recycled polypropylene composites

Hamed Younesi-Kordkheili et al.

COMPOSITES PART B-ENGINEERING (2020)

Article Materials Science, Multidisciplinary

Mechanical Properties of Sisal/Cattail Hybrid-Reinforced Polyester Composites

Silas M. Mbeche et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2020)

Review Biochemistry & Molecular Biology

Towards lignin derived thermoplastic polymers

Mahesh Parit et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Review Biochemistry & Molecular Biology

Valorization of lignin in polymer and composite systems for advanced engineering applications - A review

Maurice N. Collins et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

Review Chemistry, Multidisciplinary

About Making Lignin Great Again-Some Lessons From the Past

Wolfgang G. Glasser

FRONTIERS IN CHEMISTRY (2019)

Article Multidisciplinary Sciences

Lignin-polysaccharide interactions in plant secondary cell walls revealed by solid-state NMR

Xue Kang et al.

NATURE COMMUNICATIONS (2019)

Article Materials Science, Multidisciplinary

Synergistic effects of halloysite and carbon nanotubes (HNTs

Mohd Shahneel Saharudin et al.

AIMS MATERIALS SCIENCE (2019)

Article Multidisciplinary Sciences

Direct evidence for α ether linkage between lignin and carbohydrates in wood cell walls

Hiroshi Nishimura et al.

SCIENTIFIC REPORTS (2018)

Article Chemistry, Multidisciplinary

Correlations among Miscibility, Structure, and Properties in Thermoplastic Polymer/Lignin Blends

Vivien Romhanyi et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Article Materials Science, Composites

Evaluation of Kraft Lignin as Natural Compatibilizer in Wood Flour/Polypropylene Composites

Shupin Luo et al.

POLYMER COMPOSITES (2017)

Article Thermodynamics

Thermal characterization of a series of lignin-based polypropylene blends

Ignazio Blanco et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2017)

Article Materials Science, Paper & Wood

Physical and Mechanical Properties of Polypropylene-Wood-Carbon Fiber Hybrid Composites

Djamila Kada et al.

BioResources (2016)

Article Mechanics

Fracture resistance of hybrid PP/elastomer/wood composites

A. Sudar et al.

COMPOSITE STRUCTURES (2016)

Article Engineering, Manufacturing

High performance hybrid PP and PLA biocomposites reinforced with short man-made cellulose fibres and softwood flour

A. K. Bledzki et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

Article Engineering, Multidisciplinary

Functionalized cork-polymer composites (CPC) by reactive extrusion using suberin and lignin from cork as coupling agents

Emanuel M. Fernandes et al.

COMPOSITES PART B-ENGINEERING (2014)

Article Chemistry, Multidisciplinary

SYNERGIC EFFECT OF TWO INORGANIC FILLERS ON THE MECHANICAL AND THERMAL PROPERTIES OF HYBRID POLYPROPYLENE COMPOSITES

Hector Aguilar et al.

JOURNAL OF THE CHILEAN CHEMICAL SOCIETY (2014)

Article Materials Science, Composites

Thermoplastic-lignocellulose composites enhanced by chemically treated Alcell lignin as compatibilizer

G. S. Tay et al.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2013)

Article Chemistry, Applied

Lignin as additive in polypropylene/coir composites: Thermal, mechanical and morphological properties

Andreia A. Morandim-Giannetti et al.

CARBOHYDRATE POLYMERS (2012)

Article Polymer Science

Tensile and impact properties of three-component PP/wood/elastomer composites

G. Keledi et al.

EXPRESS POLYMER LETTERS (2012)

Article Materials Science, Composites

Micro-structural, thermal, and mechanical properties of injection-molded glass fiber/nanoclay/polypropylene composites

Normasmira Abd Rahman et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012)

Article Materials Science, Composites

Use of lignin as a compatibiliser in hemp/epoxy composites

Benjamin M. Wood et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2011)

Review Materials Science, Multidisciplinary

Recent Advances in the Application of Natural Fiber Based Composites

Jitendra K. Pandey et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2010)

Article Polymer Science

Lignin in Jute Fabric-Polypropylene Composites

B. A. Acha et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2009)

Article Materials Science, Composites

Polypropylene-Bamboo/Glass Fiber Hybrid Composites: Fabrication and Analysis of Mechanical, Morphological, Thermal, and Dynamic Mechanical Behavior

Sushanta K. Samal et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2009)

Article Polymer Science

Banana/Glass Fiber-Reinforced Polypropylene Hybrid Composites: Fabrication and Performance Evaluation

Sushanta K. Samal et al.

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2009)

Article Materials Science, Composites

Studies on tensile and flexural properties of short banana/glass hybrid fiber reinforced polystyrene composites

Anshida Haneefa et al.

JOURNAL OF COMPOSITE MATERIALS (2008)

Article Materials Science, Multidisciplinary

Application of lignin as natural adhesion promoter in cotton fibre-reinforced poly(lactic acid) (PLA) composites

Nina Graupner

JOURNAL OF MATERIALS SCIENCE (2008)

Article Materials Science, Composites

Polypropylene hybrid composites reinforced with long glass fibres and particulate filler

J Hartikainen et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2005)

Article Polymer Science

Novel applications of lignin in composite materials

W Thielemans et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2002)

Article Polymer Science

Preliminary studies on the use of modified ALCELL lignin as a coupling agent in the biofiber composites

HD Rozman et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2001)