相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Anisotropic Plasticity and Fracture of Three 6000-Series Aluminum Alloys
Susanne Thomesen et al.
METALS (2021)
Influence of strain rate sensitivity on localization and void coalescence
Javier Reboul et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
A Numerical Study on Ductile Failure of Porous Ductile Solids With Rate-Dependent Matrix Behavior
Lars Edvard Blystad Daehli et al.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2020)
Investigation of the competition between void coalescence and macroscopic strain localization using the periodic homogenization multiscale scheme
J. C. Zhu et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)
Cohesive traction-separation relations for tearing of ductile plates with randomly distributed void nucleation sites
R. G. Andersen et al.
INTERNATIONAL JOURNAL OF FRACTURE (2020)
Numerical study of ductile failure under non-proportional loading
David Morin et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2019)
Modelling and simulation of ductile failure in textured aluminium alloys subjected to compression-tension loading
Bjorn Hakon Frodal et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Micromechanical modeling and simulation of the loading path dependence of ductile failure by void growth to coalescence
Vishal Vishwakarma et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2019)
Effect of damage-related microstructural parameters on plate tearing at steady state
C. Tekoglu et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2019)
On the description of ductile fracture in metals by the strain localization theory
David Morin et al.
INTERNATIONAL JOURNAL OF FRACTURE (2018)
A Lode-dependent Gurson model motivated by unit cell analyses
Lars Edvard Daehli et al.
ENGINEERING FRACTURE MECHANICS (2018)
Combined effects of triaxiality, Lode parameter and shear stress on void growth and coalescence
Yazhi Zhu et al.
ENGINEERING FRACTURE MECHANICS (2018)
On the prediction of ductile fracture by void coalescence and strain localization
Tuo Luo et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)
Void-sheet analysis on macroscopic strain localization and void coalescence
T. F. Guo et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)
The mechanisms of ductile rupture
Philip J. Noell et al.
ACTA MATERIALIA (2018)
Unit cell simulations and porous plasticity modelling for strongly anisotropic FCC metals
Lars Edvard Bryhni Daehli et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2017)
Predicting the ductile failure of Al5083-H116 specimens with a mechanistic model and no free fitting parameters
G. F. Bomarito et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)
Influence of yield surface curvature on the macroscopic yielding and ductile failure of isotropic porous plastic materials
Lars Edvard Bryhni Daehli et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2017)
A multi-surface plasticity model for ductile fracture simulations
Shyam M. Keralavarma
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2017)
Failure of metals I: Brittle and ductile fracture
A. Pineau et al.
ACTA MATERIALIA (2016)
Using unit cell simulations to investigate fracture due to compression-tension loading
Martin Kristoffersen et al.
ENGINEERING FRACTURE MECHANICS (2016)
Effects of loading path on the fracture loci in a 3D space
Haiyang Yu et al.
ENGINEERING FRACTURE MECHANICS (2016)
Anisotropic ductile failure of a high-strength line pipe steel
Y. Shinohara et al.
INTERNATIONAL JOURNAL OF FRACTURE (2016)
Ductile failure modeling
Ahmed Amine Benzerga et al.
INTERNATIONAL JOURNAL OF FRACTURE (2016)
Void behaviors from low to high triaxialities: Transition from void collapse to void coalescence
Z. G. Liu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Influence of loading path on ductile fracture of tensile specimens made from aluminium alloys
Lars Edvard Bryhni Daehli et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2016)
On strain and damage interactions during tearing: 3D in situ measurements and simulations for a ductile alloy (AA2139-T3)
Thilo F. Morgeneyer et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2016)
Study of localization in a void-sheet under stress states near pure shear
Viggo Tvergaard
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
Micromechanical investigation of ductile failure in Al 5083-H116 via 3D unit cell modeling
G. F. Bomarito et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2015)
On the energetics of tensile and shear void coalescences
W. H. Wong et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2015)
On localization and void coalescence as a precursor to ductile fracture
C. Tekoglu et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2015)
In situ 3-D observation of early strain localization during failure of thin Al alloy (2198) sheet
Thilo F. Morgeneyer et al.
ACTA MATERIALIA (2014)
Representative volume element calculations under constant stress triaxiality, Lode parameter, and shear ratio
C. Tekoglu
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2014)
Effect of Lode parameter on plastic flow localization after proportional loading at low stress triaxialities
Matthieu Dunand et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2014)
Micro-mechanical studies on the effect of the stress triaxiality and the Lode parameter on ductile damage
Michael Bruenig et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Collapse and coalescence of spherical voids subject to intense shearing: studied in full 3D
Kim L. Nielsen et al.
INTERNATIONAL JOURNAL OF FRACTURE (2012)
On the path-dependence of the fracture locus in ductile materials - Analysis
A. A. Benzerga et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2012)
Effect of stress-state and spacing on voids in a shear-field
Viggo Tvergaard
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)
Effect of Contact Conditions on Void Coalescence at Low Stress Triaxiality Shearing
Jonas Dahl et al.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2012)
Damage quantification in aluminium alloys using in situ tensile tests in X-ray tomography
Eric Maire et al.
ENGINEERING FRACTURE MECHANICS (2011)
Void growth and coalescence in ductile solids with stage III and stage IV strain hardening
L. Lecarme et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2011)
Micromechanical analysis on the influence of the Lode parameter on void growth and coalescence
Imad Barsoum et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2011)
Void growth and coalescence in anisotropic plastic solids
S. M. Keralavarma et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2011)
The growth and coalescence of ellipsoidal voids in plane strain under combined shear and tension
F. Scheyvaerts et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2011)
Interaction between anisotropic plastic deformation and damage evolution in Al 2198 sheet metal
D. Steglich et al.
ENGINEERING FRACTURE MECHANICS (2010)
Void Coalescence With and Without Prestrain History
Z. L. Zhang et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2010)
A Study on the Effect of the Stress State on Ductile Fracture
Xiaosheng Gao et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2010)
A micromechanics based damage model for composite materials
C. Tekoglu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2010)
Void growth and coalescence in single crystals
S. K. Yerra et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2010)
A theoretical approach of strain localization within thin planar bands in porous ductile. materials
Jean-Baptiste Leblond et al.
COMPTES RENDUS MECANIQUE (2008)
Anisotropic ductile fracture of Al 2024 alloys
Dirk Steglich et al.
ENGINEERING FRACTURE MECHANICS (2008)
Observation of void nucleation, growth and coalescence in a model metal matrix composite using X-ray tomography
A. Weck et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Rupture mechanisms in combined tension and shear - Micromechanics
Imad Barsoum et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)
Void interaction and coalescence in polymeric materials
L. Cheng et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)
Modeling of ductile fracture: Significance of void coalescence
Xiaosheng Gao et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)
Performing RVE calculations under constant stress triaxiality for monotonous and cyclic loading
R. C. Lin et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2006)
Modeling of void growth in ductile solids: effects of stress triaxiality and initial porosity
J Kim et al.
ENGINEERING FRACTURE MECHANICS (2004)
Damage initiation in model metallic materials:: X-ray tomography and modelling
L Babout et al.
ACTA MATERIALIA (2004)
On fracture locus in the equivalent strain and stress triaxiality space
YB Bao et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2004)
Numerical analysis of the influence of the Lode parameter on void growth
KS Zhang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2001)