☆ 4.7 Article

Ultrafast low-temperature near-seamless joining of Cf/SiC using a sacrificial Pr3Si2C2 filler via electric current field-assisted sintering technique

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Ceramics

Effects of interfacial residual stress on mechanical behavior of SiCf/SiC composites

Xiaowu Chen et al.

Summary: Residual stress in boron nitride interphase of continuous SiC fiber-reinforced SiC composites was measured, and it was found that an increase in fabrication temperature leads to increased residual stress, which significantly affects the mechanical properties of the composites.

JOURNAL OF ADVANCED CERAMICS (2022)

添加到收藏夹

Article Materials Science, Ceramics

Low-temperature Pr3Si2C2-assisted liquid-phase sintering of SiC with improved thermal conductivity

Jie Xu et al.

Summary: In this study, a novel Pr3Si2C2 additive was prepared and successfully applied in the liquid-phase sintering of SiC ceramics. It was found that an appropriate amount of additive could improve the sintering rate and thermal conductivity of SiC, while excessive additive could decrease the thermal conductivity due to increased interfacial thermal resistance. SiC materials with optimized amount of additive and grain boundary structure exhibited the highest thermal conductivity.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2022)

添加到收藏夹

Article Materials Science, Ceramics

Joining of SiC using CoFeCrNiCuTi high entropy alloy filler by electric current field assisted sintering

Yihe Liu et al.

Summary: SiC ceramics were successfully brazed at lower temperatures using CoFeCrNiCuTi high-entropy alloy and electric field-assisted sintering technology. The inter-diffusion between the filler and ceramics was improved due to the high-entropy effect and the accelerated diffusion of elements. This approach provides a new and efficient filler system for ceramic brazing.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

添加到收藏夹

Article Materials Science, Ceramics

Near-seamless joining of Cf/SiC composites using Y3Si2C2 via electric field-assisted sintering technique

Teng Yu et al.

Summary: Y3Si2C2 material was synthesized at a low temperature and used as a joining material for C-f/SiC composites, resulting in near-seamless joints using an electric field-assisted sintering technique.

JOURNAL OF ADVANCED CERAMICS (2022)

添加到收藏夹

Article Materials Science, Ceramics

Electric current-assisted direct joining of silicon carbide

Huaxin Li et al.

Summary: The study successfully demonstrated the joining of SiC materials at relatively low temperature through the electric current-assisted joining (ECAJ) method. Enhancing the current passage achieved the joining of low-resistivity grade, nitrogen doped beta-SiC; rapid crystal growth of textured SiC was found at the interface when joining at higher temperatures.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Ytterbium disilicate-based glass-ceramic as joining material for ceramic matrix composites

Federico Smeacetto et al.

Summary: The ceramic matrix composites integration requires a reliable joining technique, with an ytterbium disilicate based glass-ceramic material showing promise for joining SiC/SiC and C/SiC composites. The material exhibits an apparent shear strength of 35 MPa and self-healing behavior at elevated temperatures, making it a potential joining material for CMCs.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Microstructure and properties of SiCf/SiC composite joints with CaO-Y2O3-Al2O3-SiO2 interlayer

Le Wang et al.

Summary: The study investigated the joining performance of CYAS glass powder sintered under different temperature conditions with SiCf/SiC composites. The joint prepared under 1400 degrees C/30 min condition was the densest, defect-free, with the highest shear strength.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Ceramics

Joining of Ti-coated monolithic SiC using a SiCw/Ti3SiC2 filler by electric field-assisted sintering

Teng Yu et al.

Summary: Monolithic SiC was successfully joined using a SiC whisker-reinforced Ti3SiC2 composite filler via electric field-assisted sintering technique, achieving a joint strength higher than 250 MPa. Optimization of process parameters and the addition of up to 15 wt. % SiC whiskers improved joint strength, but a lower joint strength was observed with 20 wt. % SiC whisker addition due to thermal expansion mismatch.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Effect of mass transfer channels on flexural strength of C/SiC composites fabricated by femtosecond laser assisted CVI method with optimized laser power

Jing Wang et al.

Summary: The study finds that the femtosecond laser assisted-chemical vapor infiltration (LA-CVI) method is effective in producing C/SiC composites with mass transfer channels, with the increase in laser machining power contributing to the integrity of hole structures. C/SiC composites with different mass transfer channels exhibit significantly improved densification, with flexural strengths reaching up to 546±15MPa, and the enhancement mechanism is mainly attributed to the increased densification and formation of dense band.

JOURNAL OF ADVANCED CERAMICS (2021)

添加到收藏夹

Article Materials Science, Ceramics

Fast seamless joining of SiCw/Ti3SiC2 composite using electric field-assisted sintering technique

Xiaobing Zhou et al.

Summary: Using electric field-assisted sintering technology, a pair of SiC whiskers (SiCw) reinforced Ti3SiC2 (SiCw/Ti3SiC2) composites were successfully self-joined at a temperature as low as 1090 degrees C. The solid-state diffusion was the main joining mechanism, with a high current density facilitating the process. The shear strength of the joints reached 51.8 MPa, with failure occurring in the matrix rather than at the interface.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Microstructure and properties of nano-laminated Y3Si2C2 ceramics fabricated via in situ reaction by spark plasma sintering

Lin-Kun Shi et al.

Summary: A nano-laminated Y3Si2C2 ceramic material was successfully synthesized through in situ reaction between YH2 and SiC using spark plasma sintering technology. The material exhibited unique fracture behavior with nano-laminated features and showed high hardness and elastic modulus when sintered at 1500 degrees C.

JOURNAL OF ADVANCED CERAMICS (2021)

添加到收藏夹

Article Materials Science, Ceramics

Joining of SiC ceramics using the Ni-Mo filler alloy for heat exchanger applications

Zikang Wang et al.

Summary: A Ni-Mo filler alloy was developed and utilized to meet the sealing demands of SiC heat exchangers. The wettability of the alloy on SiC ceramics, interfacial microstructure of the brazed joints, and flexural strengths were systematically analyzed. The joints exhibited good room-temperature and high-temperature strength, as well as resistance to acid corrosion, making them promising for applications in challenging environments.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Low temperature seamless joining of SiC using a Ytterbium film

Lin-Kun Shi et al.

Summary: The study successfully achieved seamless joining of monolithic SiC at a low temperature using electric field-assisted sintering technology, with Yb coating on SiC forming Yb3Si2C2 to create almost completely seamless joints. The high bending strength of the joints indicates a sound connection, potentially useful for SiC-based composites.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Low-temperature joining of SiC ceramics using NITE phase with Al2O3-Ho2O3 additive

Wen-Bin Niu et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Pressureless joining of silicon carbide using Ti3SiC2 MAX phase at 1500°C

Hai-Bin Ma et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Ceramics

Thermodynamic descriptions of the light rare-earth elements in silicon carbide ceramics

Kai Xu et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Almost seamless joining of SiC using an in-situ reaction transition phase of Y3Si2C2

Xiaobing Zhou et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Molten salt synthesis, formation mechanism, and oxidation behavior of nanocrystalline HfB2 powders

Da Liu et al.

JOURNAL OF ADVANCED CERAMICS (2020)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication, microstructure, and properties of SiC/Al4SiC4 multiphase ceramics via an in-situ formed liquid phase sintering

Junwen Liu et al.

JOURNAL OF ADVANCED CERAMICS (2020)

添加到收藏夹

Article Materials Science, Ceramics

Pressure-less joining of SiCf/SiC composites by Y2O3-Al2O3-SiO2 glass: Microstructure and properties

Le Wang et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Ceramics

Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behavior

Xiaowu Chen et al.

JOURNAL OF ADVANCED CERAMICS (2020)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication of SiCw/Ti3SiC2composites with improved thermal conductivity and mechanical properties using spark plasma sintering

Xiaobing Zhou et al.

JOURNAL OF ADVANCED CERAMICS (2020)

添加到收藏夹

Article Materials Science, Ceramics

A novel high entropy CoFeCrNiCu alloy filler to braze SiC ceramics

Gang Wang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Review Materials Science, Ceramics

Recent advances in joining of SiC-based materials (monolithic SiC and SiCf/SiC composites): Joining processes, joint strength, and interfacial behavior

Guiwu Liu et al.

JOURNAL OF ADVANCED CERAMICS (2019)

添加到收藏夹

Article Materials Science, Ceramics

Thermodynamic description of the sintering aid system in silicon carbide ceramics with the addition of yttrium

Kai Xu et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

添加到收藏夹

Article Materials Science, Ceramics

Nano-infiltration and transient eutectic (NITE) phase joining SiC ceramics at 1500°C

Li-Xiang Wu et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Materials Science, Ceramics

Effect of BNNTs/matrix interface tailoring on toughness and fracture morphology of hierarchical SiCf/SiC composites

Guangxiang Zhu et al.

JOURNAL OF ADVANCED CERAMICS (2019)

添加到收藏夹

Article Materials Science, Ceramics

Joining of SiCf/SiC using polycarbosilane and polysilazane preceramic mixtures

Dong-Hyuk Jeong et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Materials Science, Ceramics

Microstructure and properties of SiCf/SiC joint brazed by Y-Al-Si-O glass

Shangwu Fan et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Materials Science, Ceramics

SiC ceramics joined with an in-situ reaction gradient layer of TiC/Ti3SiC2 and interface stress distribution simulations

Xiaobing Zhou et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Recent progress in the development of SiC composites for nuclear fusion applications

T. Koyanagi et al.

JOURNAL OF NUCLEAR MATERIALS (2018)

添加到收藏夹

Article Materials Science, Ceramics

Preparation of TiC/Ti2AlC coating on carbon fiber and investigation of the oxidation resistance properties

Mian Li et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2018)

添加到收藏夹

Article Materials Science, Ceramics

Joining of SiC monoliths using a thin MAX phase tape and the elimination of joining layer by solid-state diffusion

Pipit Fitriani et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

添加到收藏夹

Article Materials Science, Ceramics

A heat-resistant preceramic polymer with broad working temperature range for silicon carbide joining

Bo Tang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

添加到收藏夹

Article Materials Science, Ceramics

KD-S SiCf/SiC composites with BN interface fabricated by polymer infiltration and pyrolysis process

Honglei Wang et al.

JOURNAL OF ADVANCED CERAMICS (2018)

添加到收藏夹

Article Chemistry, Physical

Pre-infiltration and brazing behaviors of C-f /C composites with high temperature Ti-Si eutectic alloy

Zongjing He et al.

CARBON (2018)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication and characterization of SPS sintered SiC-based ceramic from Y3Si2C2-coated SiC powders

Junqi Shao et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

添加到收藏夹

Article Materials Science, Ceramics

Flash joining of CVD-SiC coated Cf/SiC composites with a Ti interlayer

Peter Tatarko et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

添加到收藏夹

Article Materials Science, Ceramics

Low Pressure Joining of SiCf/SiC Composites Using Ti3AlC2 or Ti3SiC2 MAX Phase Tape

Arifin Septiadi et al.

JOURNAL OF THE KOREAN CERAMIC SOCIETY (2017)

添加到收藏夹

Article Chemistry, Physical

Joining of carbon fiber reinforced carbon composites with Ti3SiC2 tape film by electric field assisted sintering technique

Xiaobing Zhou et al.

CARBON (2016)

添加到收藏夹

Article Materials Science, Ceramics

Joining of CVD-SiC coated and uncoated fibre reinforced ceramic matrix composites with pre-sintered Ti3SiC2 MAX phase using Spark Plasma Sintering

Peter Tatarko et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of heat treatment on the microstructure and tensile strength of KD-II SiC fibers

Shiyi Cao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Article Chemistry, Physical

Mechanical and electromagnetic shielding properties of carbon fiber reinforced silicon carbide matrix composites

Lingqi Chen et al.

CARBON (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fast joining SiC ceramics with Ti3SiC2 tape film by electric field-assisted sintering technology

Xiaobing Zhou et al.

JOURNAL OF NUCLEAR MATERIALS (2015)

添加到收藏夹

Review Materials Science, Multidisciplinary

Field-Assisted Sintering Technology/Spark Plasma Sintering: Mechanisms, Materials, and Technology Developments

Olivier Guillon et al.

ADVANCED ENGINEERING MATERIALS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Radiation-tolerant joining technologies for silicon carbide ceramics and composites

Yutai Katoh et al.

JOURNAL OF NUCLEAR MATERIALS (2014)

添加到收藏夹

Article Materials Science, Ceramics

Microstructure of reaction layer and its effect on the joining strength of SiC/SiC joints brazed using Ag-Cu-In-Ti alloy

Yan Liu et al.

JOURNAL OF ADVANCED CERAMICS (2014)

添加到收藏夹

Article Materials Science, Composites

Effect of braking pressure and braking speed on the tribological properties of C/SiC aircraft brake materials

Shangwu Fan et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2010)

添加到收藏夹

Article Thermodynamics

Kinetic analysis of dechlorination and oxidation of PrOCl by using a non-isothermal TG method

H. C. Yang et al.

THERMOCHIMICA ACTA (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Handbook of SiC properties for fuel performance modeling

Lance L. Snead et al.

JOURNAL OF NUCLEAR MATERIALS (2007)

添加到收藏夹

Review Materials Science, Multidisciplinary

The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method

ZA Munir et al.

JOURNAL OF MATERIALS SCIENCE (2006)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of pyrolysis processes on the microstructures and mechanical properties of Cf/SiC composites using polycarbosilane

K Jian et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.