☆ 4.7 Article

Ablation behavior of CVD-TaC coatings with different crystal structures for C/C composites under oxyacetylene flame

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Effects of h-BN particles on the structure, oxidation behaviour, and kinetics of C/C composites fabricated via CVI

Zi-bo Niu et al.

Summary: The study examined how the h-BN content affects the deposition mechanism, morphology, pore system, and oxidation behavior of C/C composites, leading to different oxidation kinetics. It was found that the oxidation of C/C composites is controlled by a mixed diffusion/reaction mode across the entire temperature range, while at higher temperatures (800-900 degrees C), the oxidation of C/C-BN composites is controlled mainly by diffusion due to the self-healing effect of B2O3.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of microstructure on the ablation behavior and mechanical properties of CVD-HfC coating

Jian Zhang et al.

Summary: HfC coatings with different microstructures exhibit varying mechanical properties and ablation resistance. The dense coarse columnar structure shows good mechanical properties, while the fine columnar structure coating has better ablation resistance.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Materials Science, Ceramics

Ablation-resistant Ta0.78Hf0.22C solid solution ceramic modified C/C composites for oxidizing environments over 2200 °C

Yulei Zhang et al.

Summary: Ta0.78Hf0.22C solid solution ceramic was introduced into carbon/carbon (C/C) composites through polymer infiltration and pyrolysis (PIP). The addition of Ta0.78Hf0.22C led to a significant increase in flexural strength and modulus of the composites, as well as improved ablation resistance under high temperature oxyacetylene ablation environment. The enhanced performance was attributed to the formation of oxide particles with low melting point and the solid solution oxide particles that could effectively seal cracks and improve oxygen-barrier capacity.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Ablation behavior of HfC coating with different thickness for carbon/carbon composites at ultra-high temperature

Jian Zhang et al.

Summary: The research showed that moderate thickness of HfC coating can effectively release the thermal stress generated during ablation and improve ablation resistance. The 40 μm-thick HfC coating exhibited the best ablation resistance, alleviating thermal stress.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Improvement of ablation resistance of CVD-HfC/SiC coating on hemisphere shaped C/C composites by introducing diffusion interface

Mingde Tong et al.

Summary: In this study, the bonding strength and ablation resistance of HfC based coating on hemisphere shaped C/C composites were optimized by introducing a HfC-SiC diffusion interface. The results showed a significant increase in bonding strength and a reduction in linear and mass ablation rates after introducing HfC-SiC diffusion. The enhancement of ablation resistance was attributed to the adhesion effect of Hf-Si-O glass phase and the increase of bonding strength in the outer layer.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Ablation resistance of HfC-TaC/HfC-SiC alternate coating for SiC-coated carbon/carbon composites under cyclic ablation

Guanghui Feng et al.

Summary: Alternate coatings of HfC-TaC/HfC-SiC with different sublayer thicknesses were fabricated on SiC-coated carbon/carbon composites, showing the best ablation performance due to the dense oxide layer and stress release from dendritic cracks. Additionally, exfoliation at the interface of adjacent sublayers in some coatings led to violent evaporation of exposed sublayers.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Long-time ablation behavior of the multilayer alternating CVD-(SiC/HfC)3 coating for carbon/carbon composites

Jian Zhang et al.

Summary: The SiC/HfC coating with multi-layer alternating structure prepared on C/C composites by LPCVD showed improved ablation resistance under ultra-high temperature environments, attributed to the formation of Hf-Si-O sticky glass phase and the multi-layer structure.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of carbon preform density on the microstructure and ablation resistance of CLVD-C/C-ZrC-SiC composites

Qinchuan He et al.

Summary: The study focused on the effects of preform density on the microstructure and ablation behavior of CLVD-C/C-ZrC-SiC composites. Results showed that composites prepared from preforms with a density of 0.91 g/cm(3) exhibited dense microstructure and proper ceramic content, leading to excellent ablation resistance attributed to the formation of a uniform and continuous protective layer of ZrO2-SiO2.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Materials Science, Ceramics

Structural design and ablation performance of ZrB2/MoSi2 laminated coating for SiC coated carbon/carbon composites

Hu Dou et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Microstructure and anti-ablation performance of HfC-TaC and HfC-ZrC coatings synthesized by CVD on C/C composites

Jincui Ren et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Ceramics

Mechanical properties and ablation resistance of HfC nanowire modified carbon/carbon composites

Yanqin Fu et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigation on the ablation performance and mechanism of HfC coating modified with TaC

Guanghui Feng et al.

CORROSION SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Damage tolerance of carbon-carbon composites in aerospace application

Piyas Chowdhury et al.

CARBON (2018)

添加到收藏夹

Article Materials Science, Ceramics

Ablation behavior of C/C-ZrC and C/SiC-ZrC composites fabricated by a joint process of slurry impregnation and chemical vapor infiltration

Haijun Zhou et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Materials Science, Ceramics

Mechanical properties and ablation behavior of C/C-ZrC and C/C-ZrC-SiC composites prepared by precursor infiltration and pyrolysis combined with chemical vapor infiltration

Zhigang Zhao et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ablation Mechanism of HfC-HfO2 Protective Coating for SiC-Coated C/C Composites in an Oxyacetylene Torch Environment

Yang Yang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Ultra-high temperature ceramics: Materials for extreme environments

William G. Fahrenholtz et al.

SCRIPTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Coatings & Films

SiC/ZrB2-SiC-ZrC multilayer coating for carbon/carbon composites against ablation

Yulei Zhang et al.

SURFACE & COATINGS TECHNOLOGY (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

HfC nanowire-toughened TaSi2-TaC-SiC-Si multiphase coating for C/C composites against oxidation

Yu-Lei Zhang et al.

CORROSION SCIENCE (2015)

添加到收藏夹

Article Materials Science, Coatings & Films

Preparation of oxidation protective ZrB2-SiC coating by in-situ reaction method on SiC-coated carbon/carbon composites

Xuanru Ren et al.

SURFACE & COATINGS TECHNOLOGY (2014)

添加到收藏夹

Article Chemistry, Physical

Effects of porous C/C density on the densification behavior and ablation property of C/C-ZrC-SiC composites

Ke-zhi Li et al.

CARBON (2013)

添加到收藏夹

Article Materials Science, Ceramics

Ablation behaviour of a TaC coating on SiC coated C/C composites at different temperatures

Yong-jie Wang et al.

CERAMICS INTERNATIONAL (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Diffusion and solid solution formation between the binary carbides of TaC, HfC and ZrC

S. A. Ghaffari et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2013)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

Effect of gas composition on the microstructure and growth behavior of HfC coatings prepared by LPCVD

Ya-lei Wang et al.

SOLID STATE SCIENCES (2013)

添加到收藏夹

Article Materials Science, Coatings & Films

Effect of Y2O3 on the oxidation resistant of ZrSiO4/SiC coating prepared by supersonic plasma spraying technique for carbon/carbon composites

Can Sun et al.

SURFACE & COATINGS TECHNOLOGY (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ablation behavior of HfC protective coatings for carbon/carbon composites in an oxyacetylene combustion flame

Ya-lei Wang et al.

CORROSION SCIENCE (2012)

添加到收藏夹

Article Materials Science, Coatings & Films

Synthesis in molten salts and formation reaction kinetics of tantalum carbide coatings on various carbon fibers

Z. J. Dong et al.

SURFACE & COATINGS TECHNOLOGY (2012)

添加到收藏夹

Article Chemistry, Physical

Ablative property of HfC-based multilayer coating for C/C composites under oxy-acetylene torch

Wang Yong-Jie et al.

APPLIED SURFACE SCIENCE (2011)

添加到收藏夹

Article Materials Science, Ceramics

Microstructure characteristics of silicon carbide coatings fabricated on C/C composites by plasma spraying technology

Yaran Niu et al.

CERAMICS INTERNATIONAL (2011)

添加到收藏夹

Article Chemistry, Physical

Texture structure and ablation behavior of TaC coating on carbon/carbon composites

Chen Zhao-Ke et al.

APPLIED SURFACE SCIENCE (2010)

添加到收藏夹

Article Materials Science, Ceramics

Improved ablation resistance of C-C composites using zirconium diboride and boron carbide

Erica L. Corral et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2010)

添加到收藏夹

Article Chemistry, Physical

Ablation behaviors of carbon/carbon composites with C-SiC-TaC multi-interlayers

Chen Zhao-ke et al.

APPLIED SURFACE SCIENCE (2009)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.