☆ 4.7 Article

Direct ink writing of porous SiC ceramics with geopolymer as binder

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Environmental

Cell spheroids containing bioactive molecule-immobilized porous particles with a leaf-stacked structure

Min Ji Kim et al.

Summary: The study demonstrated that cell spheroids containing bone morphogenetic protein-2 (BMP-2)-immobilized polycaprolactone (PCL) particles could address the challenges of cellular heterogeneity, low structural stability, and uncontrolled cell differentiation. The porous leaf-stacked structure (LSS) particles were able to prevent cellular heterogeneity while providing a stable surface for cell adhesion, leading to effective osteogenic differentiation of stem cells and new bone formation. This approach represents a potential strategy to overcome the limitations of conventional cell spheroids and is a promising platform for tissue regeneration and high-throughput screening in pharmacology and toxicology studies.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Materials Science, Ceramics

Lattice-structured SiC ceramics obtained via 3D printing, gel casting, and gaseous silicon infiltration sintering

Yuli Wang et al.

Summary: This study investigated the preparation of silicon carbide ceramics with complex shapes using gel casting combined with 3D printing. The slurry preparation, gel curing, and ceramic molding processes were examined. The results showed that the ratio of components affected the fluidity and stability of the slurry. The temperature and initiator also influenced the gel curing speed. A 3D lattice-structured ceramic with high relative density and compressive strength could be obtained by gaseous silicon infiltration sintering.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

3D-printing of architectured short carbon fiber-geopolymer composite

Siqi Ma et al.

Summary: A novel approach combining 3D printing technology and Bouligand structure design was used to fabricate lightweight, high strength, and superior toughness CsfGP composites, showing outstanding mechanical properties with consistent fiber orientation distribution and sophisticated interfaces.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Energy & Fuels

Synthesis of hollow Al-doped MgO spheres via a sacrificial templating method for enhanced CO2 adsorption

Xiaodi Niu et al.

Summary: This study investigated the effects of Mg(NO3)2·6H2O concentration and Al doping on the structure and CO2 adsorption performance of MgO spheres. The results showed that Al incorporation led to the formation of hollow MgO spheres with improved CO2 adsorption capacity. Overall, this work provided insights into enhancing CO2 adsorption using MgO-based adsorbents.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2021)

添加到收藏夹

Review Materials Science, Ceramics

Oxidation of ultrahigh temperature ceramics: kinetics, mechanisms, and applications

K. A. Kane et al.

Summary: This review examines the need for materials capable of withstanding oxidation at ultrahigh temperatures, evaluating the performance of various ultra-high temperature ceramics in terms of oxidation resistance for specific applications.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Formation of SiC whiskers/leucite-based ceramic composites from low temperature hardening geopolymer

Siqi Ma et al.

Summary: SiC whiskers have a significant impact on the flexural strength of SCWS/KGP composites, and the flexural strength can be further enhanced with increasing heat treatment temperatures.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Review Materials Science, Ceramics

Dense ceramics with complex shape fabricated by 3D printing: A review

Zhe Chen et al.

Summary: This review discusses the principles of four 3D printing technologies and the parameters affecting the densification of 3D printed ceramics, as well as technical challenges and suggestions for achieving higher ceramic density. The goal is to understand critical parameters in the subsequent 3D printing process to prepare dense ceramics for practical applications.

JOURNAL OF ADVANCED CERAMICS (2021)

添加到收藏夹

Article Materials Science, Ceramics

Direct foaming of Al2O3-based macroporous ceramics containing pre-foamed colloidal alumina, calcite and CAC suspension

I. C. Finhana et al.

Summary: By adding pre-foamed colloidal alumina, calcium aluminate cement suspension, and CaCO3 to ultrastable Al2O3-stabilised foams, the solidification kinetics can be accelerated, mechanical strength improved, and shrinkage reduced after firing, while maintaining high porosity and smaller pore sizes.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Review Materials Science, Ceramics

Mine tailings-based geopolymers: Properties, applications and industrial prospects

R. S. Krishna et al.

Summary: The use of mine tailings as precursors of geopolymers shows promising potential for sustainable utilization and environmental benefits. However, due to the complex composition of mine tailings, further research is needed to better understand the geopolymerization process and the influence of various factors on the properties of mine tailings-based geopolymers.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Environmental Sciences

Hydrothermal transformation of geopolymers to bulk zeolite structures for efficient hazardous elements adsorption

Peigang He et al.

Summary: This study demonstrates a facile method to prepare bulk zeolites with tunable phase compositions and microstructures by combining hydrothermal treatment and geopolymer precursor technique. By systematically investigating the effects of hydrothermal conditions, the optimal hydrothermal procedure for specific phase compositions is determined. The resulting zeolites show promising adsorption performance for hazardous elements, with mechanisms of chemisorption and ion exchanges elucidated.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

添加到收藏夹

Article Construction & Building Technology

Large-scale 3D printing concrete technology: Current status and future opportunities

Jianzhuang Xiao et al.

Summary: This review focuses on large-scale extrusion-based 3D printing concrete (3DPC) technologies, which are subdivided into three categories according to different printed objects and construction processes, and compares the different printability requirements of large-scale and lab-scale 3DPC. Practical problems of large-scale 3DPC are discussed, including reinforcement constructions, preparation and remix of concrete, and different large-scale 3D printing systems.

CEMENT & CONCRETE COMPOSITES (2021)

添加到收藏夹

Review Construction & Building Technology

Geopolymer as underwater concreting material: A review

Fakhryna Hannanee Ahmad Zaidi et al.

Summary: Underwater concrete is a special type of high-performance concrete commonly used for constructing underwater structures. Geopolymer, a new material, shows potential to replace ordinary Portland cement as a binder in underwater concrete, exhibiting excellent properties and performance. Limited research has been conducted on the use of geopolymers in underwater concreting, presenting future research opportunities in this area.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

Thermal reduction of graphene oxide in the presence of carbon suboxide

Ruta Aukstakojyte et al.

Summary: The study showed that the presence of C3O2 increases the chemical reactivity of GO and lowers the activation energy for thermal decomposition. The thermal decomposition of GO is found to involve both consecutive zero-order and first-order processes. Comparing enthalpy values, it was found that GO with C3O2 releases less energy during thermal reduction compared to pure GO.

JOURNAL OF SOLID STATE CHEMISTRY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Microwave induced in-situ formation of SiC nanowires on SiCNO ceramic aerogels with excellent electromagnetic wave absorption performance

Keke Yuan et al.

Summary: SiCnw/SiCNO composite aerogels with excellent EMA performance were successfully fabricated by regulating morphology and phase composition through microwave treatment temperature variation. The superior EMA performance is mainly attributed to improved impedance matching, multi-reflection, multi-interfacial polarization, and micro current caused by migration of hopping electrons.

JOURNAL OF ADVANCED CERAMICS (2021)

添加到收藏夹

Review Materials Science, Ceramics

Progress and challenges towards additive manufacturing of SiC ceramic

Rujie He et al.

Summary: The emergence of additive manufacturing technologies has opened up new avenues for the fabrication of SiC ceramic products. This paper reviews the recent developments in additive manufacturing of SiC ceramic, highlights key challenges, and forecasts potential opportunities for the future. The aim is to provide guidance for the additive manufacturing of SiC ceramic and other structural ceramics.

JOURNAL OF ADVANCED CERAMICS (2021)

添加到收藏夹

Article Materials Science, Ceramics

Insights into the pore-forming effect of polyvinyl butyral (PVB) as the polymer template to synthesize mesoporous alumina nanofibers via electrospinning

Xiaolei Song et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Ceramics

3D printing of ceramics and graphene circuits-on-ceramics by thermal bubble inkjet technology and high temperature sintering

Zheguan Huang et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Ceramics

Preliminary 3D printing of large inclined-shaped alumina ceramic parts by direct ink writing

Liangliang Yang et al.

JOURNAL OF ADVANCED CERAMICS (2020)

添加到收藏夹

Article Materials Science, Ceramics

3D printing of porous SiC ceramics added with SiO2 hollow microspheres

Xiaomei Sun et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Engineering, Chemical

Recovery and concentration of ammonia from return liquor to promote enhanced CO2 absorption and simultaneous ammonium bicarbonate crystallisation during biogas upgrading in a hollow fibre membrane contactor

S. Bavarella et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Physical

Synthesis and characterization of a geopolymer/hexagonal-boron nitride composite for free forming 3D extrusion-based printing

Qinglei Sun et al.

APPLIED CLAY SCIENCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Self lubrication of pressureless sintered SiC ceramics

Wei Zhang et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Review Construction & Building Technology

Geopolymers in construction - recent developments

Mohsin Nawaz et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Dynamic deformation and failure process of quasi-closed-cell aluminum foam manufactured by direct foaming technique

Ruoxuan Huang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication of complex shaped ceramic articles from 3D printed polylactic acid templates by replication process

Sirisala Mamatha et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Materials Science, Ceramics

In-situ formation of bulk and porous h-AlN/SiC-based ceramics from geopolymer technique

Dechang Jia et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Printability region for 3D concrete printing using slump and slump flow test

Yi Wei Daniel Tay et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Review Materials Science, Ceramics

3D printing of ceramics: A review

Zhangwei Chen et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication and properties of C/SiC porous ceramics by grinding-mould pressing-sintering process

Bo Zhang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

添加到收藏夹

Review Materials Science, Ceramics

Manufacturing porous ceramic materials by tape casting-A review

Rafael Kenji Nishihora et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

添加到收藏夹

Article Materials Science, Ceramics

Low-temperature preparation of Si3N4 whiskers bonded/reinforced SiC porous ceramics via foam-gelcasting combined with catalytic nitridation

Lei Han et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Origami and 4D printing of elastomer-derived ceramic structures

Guo Liu et al.

SCIENCE ADVANCES (2018)

添加到收藏夹

Article Materials Science, Ceramics

Effect of Porosity on Structure, Young's Modulus, and Thermal Conductivity of SiC Foams by Direct Foaming and Gelcasting

Dulal Chandra Jana et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)

添加到收藏夹

Article Materials Science, Ceramics

Direct ink writing of geopolymeric inks

Giorgia Franchin et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Three-dimensional printing of transparent fused silica glass

Frederik Kotz et al.

NATURE (2017)

添加到收藏夹

Article Materials Science, Ceramics

Sacrificial template synthesis of core-shell SrTiO3/TiO2 heterostructured microspheres photocatalyst

Wei Zhao et al.

CERAMICS INTERNATIONAL (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ultralight, Strong, Three-Dimensional SiC Structures

Sakineh Chabi et al.

ACS NANO (2016)

添加到收藏夹

Article Multidisciplinary Sciences

3D PRINTING Additive manufacturing of polymer-derived ceramics

Zak C. Eckel et al.

SCIENCE (2016)

添加到收藏夹

Article Materials Science, Ceramics

Effect of sintering temperature on the characteristics of ceramic hollow spheres produced by sacrificial template technique

Ryuma M. Matsuda et al.

CERAMICS INTERNATIONAL (2016)

添加到收藏夹

Article Materials Science, Ceramics

Synthesis and Characterization of Silicon Carbide Powders Converted from Metakaolin-Based Geopolymer

Cengiz Bagci et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2016)

添加到收藏夹

Article Chemistry, Physical

Preparation of porous graphene using cuprous oxide microspheres as sacrificial templates for enriching proteins and peptides

Huimin Ge et al.

CARBON (2015)

添加到收藏夹

Article Materials Science, Composites

Preparation of fully stabilized cubic-leucite composite through heat-treating Cs-substituted K-geopolymer composite at high temperatures

Peigang He et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2015)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication and characterization of reaction-bonded silicon carbide with poly(methyl methacrylate) as pore-forming agent

Qide Wu et al.

CERAMICS INTERNATIONAL (2013)

添加到收藏夹

Review Materials Science, Ceramics

Processing and properties of macroporous silicon carbide ceramics: A review

Jung-Hye Eom et al.

JOURNAL OF ASIAN CERAMIC SOCIETIES (2013)

添加到收藏夹

Article Engineering, Environmental

Fabrication of novel magnetic chitosan grafted with graphene oxide to enhance adsorption properties for methyl blue

Lulu Fan et al.

JOURNAL OF HAZARDOUS MATERIALS (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fabrication of directional SiC porous ceramics using Fe2O3 as pore-forming agent

Jianguang Bai et al.

MATERIALS LETTERS (2012)

添加到收藏夹

Article Polymer Science

Preparation and properties of pore-filling membranes based on sulfonated copolyimides and porous polyimide matrix

Taipeng Wang et al.

POLYMER (2012)

添加到收藏夹

Article Materials Science, Ceramics

Thermal evolution and crystallization kinetics of potassium-based geopolymer

Peigang He et al.

CERAMICS INTERNATIONAL (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Variability in mechanical properties of a metal foam

U Ramamurty et al.

ACTA MATERIALIA (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.