相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。New conductive filament ready-to-use for 3D-printing electrochemical (bio)sensors: Towards the detection of SARS-CoV-2
Jessica Santos Stefano et al.
ANALYTICA CHIMICA ACTA (2022)
Evolution of 3D Printing Methods and Materials for Electrochemical Energy Storage
Vladimir Egorov et al.
ADVANCED MATERIALS (2020)
Architected porous metals in electrochemical energy storage
Vladimir Egorov et al.
CURRENT OPINION IN ELECTROCHEMISTRY (2020)
Additive manufacturing for energy storage: Methods, designs and material selection for customizable 3D printed batteries and supercapacitors
Umair Gulzar et al.
CURRENT OPINION IN ELECTROCHEMISTRY (2020)
Electrolysis Activation of Fused-Filament-Fabrication 3D-Printed Electrodes for Electrochemical and Spectroelectrochemical Analysis
Denise M. Wirth et al.
ANALYTICAL CHEMISTRY (2019)
The capacitance and electron transfer of 3D-printed graphene electrodes are dramatically influenced by the type of solvent used for pre-treatment
Rui Gusmao et al.
ELECTROCHEMISTRY COMMUNICATIONS (2019)
Preserving Fine Structure Details and Dramatically Enhancing Electron Transfer Rates in Graphene 3D-Printed Electrodes via Thermal Annealing: Toward Nitroaromatic Explosives Sensing
Filip Novotny et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
NaV2O5 from Sodium Ion-Exchanged Vanadium Oxide Nanotubes and Its Efficient Reversible Lithiation as a Li-Ion Anode Material
David McNulty et al.
ACS APPLIED ENERGY MATERIALS (2019)
Morphology, thermal, and crystallization analysis of polylactic acid in the presence of carbon nanotube fibers with tunable fiber loadings through polymer infiltration
Hangbo Yue et al.
POLYMER CRYSTALLIZATION (2019)
3D Printing for Electrocatalytic Applications
Chong-Yong Lee et al.
JOULE (2019)
3D printed electrochemical energy storage devices
Peng Chang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
3D Printing of Customized Li-Ion Batteries with Thick Electrodes
Teng-Sing Wei et al.
ADVANCED MATERIALS (2018)
Novel rechargeable 3D-Microbatteries on 3D-printed-polymer substrates: Feasibility study
E. Cohen et al.
ELECTROCHIMICA ACTA (2018)
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Syed A. M. Tofail et al.
MATERIALS TODAY (2018)
Towards smart free form-factor 3D printable batteries
Heftsi Ragones et al.
SUSTAINABLE ENERGY & FUELS (2018)
Bioinspired hierarchical composite design using machine learning: simulation, additive manufacturing, and experiment
Grace X. Gu et al.
MATERIALS HORIZONS (2018)
3D Printed Graphene Electrodes' Electrochemical Activation
Michelle P. Browne et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Highly Loaded Graphite-Polylactic Acid Composite-Based Filaments for Lithium-Ion Battery Three-Dimensional Printing
Alexis Maurel et al.
CHEMISTRY OF MATERIALS (2018)
Silica Nanoparticle-Induced Structural Reorganizations in Pulmonary Surfactant Films: What Monolayer Compression Isotherms Do Not Say
Olga Borozenko et al.
ACS APPLIED NANO MATERIALS (2018)
Embedded electrical tracks in 3D printed objects by fused filament fabrication of highly conductive composites
J. C. Tan et al.
ADDITIVE MANUFACTURING (2018)
Self-Contained Polymer/Metal 3D Printed Electrochemical Platform for Tailored Water Splitting
Adriano Ambrosi et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Recent development and challenges of multifunctional structural supercapacitors for automotive industries
Biplab K. Deka et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2017)
3D direct writing fabrication of electrodes for electrochemical storage devices
Min Wei et al.
JOURNAL OF POWER SOURCES (2017)
The Influence of Colloidal Opal Template and Substrate Type on 3D Macroporous Single and Binary Vanadium Oxide Inverse Opal Electrodeposition
Sally O'Hanlon et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Development of 3D printable formulations containing CNT with enhanced electrical properties
Gustavo Gonzalez et al.
POLYMER (2017)
3D Printable Ceramic-Polymer Electrolytes for Flexible High-Performance Li-Ion Batteries with Enhanced Thermal Stability
Aaron J. Blake et al.
ADVANCED ENERGY MATERIALS (2017)
3D printing technologies for electrochemical energy storage
Feng Zhang et al.
NANO ENERGY (2017)
A hybrid three-dimensionally structured electrode for lithium-ion batteries via 3D printing
Jie Li et al.
MATERIALS & DESIGN (2017)
3D Printed Graphene Based Energy Storage Devices
Christopher W. Foster et al.
SCIENTIFIC REPORTS (2017)
3D printing of CNT-and graphene-based conductive polymer nanocomposites by fused deposition modeling
K. Gnanasekaran et al.
APPLIED MATERIALS TODAY (2017)
3D printed graphene-based electrodes with high electrochemical performance
D. Vernardou et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2017)
Three-Dimensional Printing of Highly Conductive Carbon Nanotube Microarchitectures with Fluid Ink
Jung Hyun Kim et al.
ACS NANO (2016)
3D Printing of Conductive Complex Structures with In Situ Generation of Silver Nanoparticles
Erika Fantino et al.
ADVANCED MATERIALS (2016)
Graphene Oxide-Based Electrode Inks for 3D-Printed Lithium-Ion Batteries
Kun Fu et al.
ADVANCED MATERIALS (2016)
All-solid-state micro-supercapacitors based on inkjet printed graphene electrodes
Jiantong Li et al.
APPLIED PHYSICS LETTERS (2016)
3D-printing technologies for electrochemical applications
Adriano Ambrosi et al.
CHEMICAL SOCIETY REVIEWS (2016)
3D-Printed Cathodes of LiMn1-xFexPO4 Nanocrystals Achieve Both Ultrahigh Rate and High Capacity for Advanced Lithium-Ion Battery
Jiangtao Hu et al.
ADVANCED ENERGY MATERIALS (2016)
Composite batteries: a simple yet universal approach to 3D printable lithium-ion battery electrodes
Ryan R. Kohlmeyer et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
3D-Printed Structural Pseudocapacitors
Xinhua Liu et al.
ADVANCED MATERIALS TECHNOLOGIES (2016)
3D Vanadium Oxide Inverse Opal Growth by Electrodeposition
Eileen Armstrong et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)
Printable Solid-State Lithium-Ion Batteries: A New Route toward Shape-Conformable Power Sources with Aesthetic Versatility for Flexible Electronics
Se-Hee Kim et al.
NANO LETTERS (2015)
Solution processable broadband transparent mixed metal oxide nanofilm optical coatings via substrate diffusion doping
Colm Glynn et al.
NANOSCALE (2015)
Electrodeposition of Vanadium Oxide/Manganese Oxide Hybrid Thin Films on Nanostructured Aluminum Substrates
David Rehnlund et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)
Imprintable, Bendable, and Shape-Conformable Polymer Electrolytes for Versatile-Shaped Lithium-Ion Batteries
Eun-Hye Kil et al.
ADVANCED MATERIALS (2013)
3D Printing of Interdigitated Li-Ion Microbattery Architectures
Ke Sun et al.
ADVANCED MATERIALS (2013)
Crystalline structure of annealed polylactic acid and its relation to processing
T. Tabi et al.
EXPRESS POLYMER LETTERS (2010)
A super ink jet printed zinc-silver 3D microbattery
C. C. Ho et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2009)
Review on composite polymer electrolytes for lithium batteries
A. Manuel Stephan et al.
POLYMER (2006)
Determination of the V2p XPS binding energies for different vanadium oxidation states (V5+ to V0+)
G Silversmit et al.
JOURNAL OF ELECTRON SPECTROSCOPY AND RELATED PHENOMENA (2004)
Raman spectroscopy of graphite
S Reich et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2004)
Crystal structure of the α-form of poly(L-lactide)
C Alemán et al.
MACROMOLECULES (2001)