4.7 Article

Edge-enriched MoS2 nanosheets modified porous nanosheet-assembled hierarchical In2O3 microflowers for room temperature detection of NO2 with ultrahigh sensitivity and selectivity

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

High performance humidity sensor based on 3D mesoporous Co3O4 hollow polyhedron for multifunctional applications

Yajie Zhang et al.

Summary: In this work, three-dimensional hollow mesoporous Co3O4 was successfully prepared and utilized as a humidity sensor. The humidity sensor exhibited excellent performance with a wide detection range, low hysteresis, and fast response/recovery times. Furthermore, potential applications in various fields were demonstrated for this humidity sensor.

APPLIED SURFACE SCIENCE (2022)

Article Materials Science, Multidisciplinary

Porous In2O3 thick films as a low temperature NO2 gas detector

S. P. Patil et al.

Summary: Porous indium oxide nanoparticles synthesized by hydrothermal method exhibit a brick-like structure with self-assembled growth, providing a large number of active sites for gas molecule adsorption and showing a quick sensor response for NO2 gas at very low temperature. The In2O3 sensor can detect NO2 gas down to 60 ppb.

MATERIALS LETTERS (2022)

Article Engineering, Environmental

High performance langasite based SAW NO2 gas sensor using 2D g-C3N4@TiO2 hybrid nanocomposite

Kedhareswara Sairam Pasupuleti et al.

Summary: In this study, a high-performance langasite-based surface acoustic wave (SAW) gas sensor for nitrogen dioxide (NO2) at room temperature was developed. The sensor exhibited excellent selectivity, sensitivity, and response time, as well as stability in various relative humidity conditions. The integration of 2D materials with metal oxides shows promise for environmental protection.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Chemistry, Analytical

PrGO decorated TiO2 nanoplates hybrid nanocomposite for augmented NO2 gas detection with faster gas kinetics under UV light irradiation

Nimmala Harathi et al.

Summary: The TiO2 NPs/PrGO heterostructure sensor fabricated in this work showed superior NO2 response at room temperature. The sensor exhibited high sensitivity, repeatability, excellent selectivity, and short response/recovery times towards NO2 gas. Additionally, UV irradiation accelerated the gas sensing performance of the TiO2 NPs/PrGO sensor.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Article Chemistry, Analytical

Gold-loaded tellurium nanobelts gas sensor for ppt-level NO2 detection at room temperature

Zhen Yuan et al.

Summary: In this study, gold-loaded tellurium nanobelts were synthesized through a hydrothermal process, and the resulting Au@Te sensor demonstrated rapid response, high sensitivity, good repeatability, and selectivity for the detection of NO2. The long-term stability of the sensor was also evaluated, with stable response observed over a period of 28 days.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Article Chemistry, Physical

Assembly of stacked In2O3 nanosheets for detecting trace NO2 with ultrahigh selectivity and promoted recovery

Wei Yang et al.

Summary: This study successfully prepared stacked nanosheet structure of In2O3 material through a facile hydrothermal and annealing route, and investigated its morphology evolution and gas sensing properties. The nanosheets showed significant response towards NO2 with ultrahigh selectivity, and could achieve fast recovery through a pulse-heating strategy.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Physical

Hexagonal ZnO nanoplates/graphene composites with excellent sensing performance to NO2 at room temperature

Lizhai Zhang et al.

Summary: Metal oxides with high-energy facets, such as ZnO nanoparticles with exposed {0001} polar surface, show better gas sensing properties, particularly to NO2 at room temperature. The metallic characteristics of ZnO {0001} surface promote charge transfer and enhance NO2 detection sensitivity.

APPLIED SURFACE SCIENCE (2021)

Article Materials Science, Multidisciplinary

Efficient Charge Separation in Polypyrrole/GaN-Nanorod-Based Hybrid Heterojunctions for High-Performance Self-Powered UV Photodetection

Kedhareswara Sairam Pasupuleti et al.

Summary: The integration of conductive polypyrrole and GaN nanorods for high-performance self-powered UV-A photodetectors is demonstrated, showing superior photoresponse properties and stability. The device exhibits fast response times and high detectivity, responsivity, and external quantum efficiency values.

PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS (2021)

Article Chemistry, Analytical

Flexible resistive NO2 gas sensor of three-dimensional crumpled MXene Ti3C2Tx/ZnO spheres for room temperature application

Zijie Yang et al.

Summary: In this study, a room-temperature flexible NO2 sensor based on three-dimensional crumpled MXene sphere prepared by ultrasonic spray pyrolysis technology is developed. The performance is further improved by designing 3D crumpled MXene sphere/ZnO composites sensitive electrode with high specific surface area and active sites. The excellent NO2 sensing properties are attributed to the high surface area, abundance of edges and defects, and the formation of MXene/ZnO p-n heterojunction.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Review Nanoscience & Nanotechnology

Strategy and Future Prospects to Develop Room-Temperature-Recoverable NO2 Gas Sensor Based on Two-Dimensional Molybdenum Disulfide

Abhay V. Agrawal et al.

Summary: MoS2 has great potential in gas sensing due to its high surface to volume ratio and position-dependent gas molecules adsorption. This review discusses the recent strategies and fabrication of MoS2 chemiresistance sensors for NO2 detection, addressing the challenges and future perspectives in enhancing gas-sensing performance.

NANO-MICRO LETTERS (2021)

Article Engineering, Environmental

Fast detection of NO2 by porous SnO2 nanotoast sensor at low temperature

Ji Li et al.

Summary: The study synthesized porous SnO2 nanotoasts with a large surface area and fabricated thick film sensors with high response to NO2 gas. The sensors exhibited excellent performance at 50 degrees C, including high response, low detection limitation, fast response time, and wide detection range.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Chemistry, Analytical

Highly sensitive and selective NO2 sensor of alkalized V2CTx MXene driven by interlayer swelling

Yajie Zhang et al.

Summary: Alkalized V2CTx MXene material, synthesized with abundant surface functional groups, suitable interlayer spacing, and appropriate Na+ intercalation, exhibits excellent gas sensing performance, especially high sensitivity and response to NO2.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Analytical

Improving anti-humidity property of In0O3 based NO2 sensor by fluorocarbon plasma treatment

Bingsheng Du et al.

Summary: By modifying In2O3 with a layer of CF to improve its anti-humidity properties in NO2 sensing, the CF modified In2O3 (CF-In2O3) sensors exhibit good sensitivity and selectivity to NO2, with a significantly enhanced anti-interference performance to humidity. This work makes significant advances in addressing moisture interference and detecting NO2 in practical applications.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Analytical

Boosting of NO2 gas sensing performances using GO-PEDOT:PSS nanocomposite chemical interface coated on langasite-based surface acoustic wave sensor

Kedhareswara Sairam Pasupuleti et al.

Summary: In this study, a high response SAW NO2 gas sensor was developed by depositing the GO-PEDOT:PSS nanocomposite on piezoelectric LGS substrate. The experimental results revealed the superior NO2 gas sensing performance of GO-PEDOT:PSS and the mass loading effect is the underlying mechanism for its performance.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Analytical

Metal-organic framework-derived Cu2O-CuO octahedrons for sensitive and selective detection of ppb-level NO2 at room temperature

Wei Wang et al.

Summary: Cu2O-CuO heterojunction octahedrons fabricated through the thermal decomposition of Cu-based MOF precursors showed enhanced sensing properties to NO2 at room temperature, with good stability and selectivity down to 10 ppb detection concentration. The improved NO2 sensing properties were attributed to the formation of Cu2O-CuO p-p heterojunctions, facilitating the adsorption of more O-2(-) species to participate in the sensing reaction.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Analytical

Interaction activated interfacial charge transfer in 2D g-C3N4/GaN nanorods heterostructure for self-powered UV photodetector and room temperature NO2 gas sensor at ppb level

Maddaka Reddeppa et al.

Summary: This research demonstrates the dual functionality of a self-powered ultraviolet light photodetector and selective NO2 gas sensor using a g-C3N4/GaN NRs heterostructure device. The device shows high responsivity and detectivity for UV light and remarkable response to NO2 gas, with the potential for further enhancement through UV and visible light stimulation. The improved response is attributed to sensitization of g-g-C3N4 and effective charge transport and separation at the g-g-C3N4/GaN NRs junction.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Analytical

Effect of resonant tunneling modulation on ZnO/In2O3 heterojunction nanocomposite in efficient detection of NO2 gas at room temperature

Xiao Liang et al.

Summary: This study successfully achieved rapid detection of ppb-level NO2 gas at room temperature through resonance tunneling modulation. The ZnO/In2O3 nanocomposites showed superior gas-sensing performance, with good selectivity and low detection limit to NO2 gas.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Materials Science, Multidisciplinary

Highly sensitive g-C3N4 nanosheets as a potential candidate for the effective detection of NO2 gas via langasite-based surface acoustic wave gas sensor

Kedhareswara Sairam Pasupuleti et al.

Summary: This study presents a surface acoustic wave (SAW) NO2 gas sensor utilizing two-dimensional g-C3N4 nanosheets deposited on langasite (LGS) SAW device. The 220 nm thickness of g-C3N4-coated LGS SAW sensors exhibited superior sensing performances.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Review Chemistry, Analytical

The Key Role of Active Sites in the Development of Selective Metal Oxide Sensor Materials

Artem Marikutsa et al.

Summary: The study focused on investigating the active sites and sensing behavior of metal oxide semiconductor materials with different compositions, highlighting the key role of active sites in determining the selectivity of sensor materials.

SENSORS (2021)

Article Chemistry, Analytical

Enhanced NO2 gas sensing properties based on Rb-doped hierarchical flower-like In2O3 microspheres at low temperature

Yongguang Wang et al.

Summary: Rb-doped hierarchical flower-like In2O3 microspheres were synthesized and their gas sensing properties were systematically investigated. Sensors based on Rb-doped In2O3 exhibited ultrahigh response to NO2 and a low detection limit. The excellent performance was mainly attributed to its high specific surface area and novel structure.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Nanoscience & Nanotechnology

Chemical and Electronic Modulation via Atomic Layer Deposition of NiO on Porous In2O3 Films to Boost NO2 Detection

Jiayue Xie et al.

Summary: Designing a unique NiO-functionalized macroporous In2O3 thin film by atomic layer deposition (ALD) enables high sensitivity to NO2 at low temperatures. Manipulating the oxygen vacancy concentration and p-n heterojunctions in the In2O3/NiO hybrid films significantly impacts the surface chemical and electrical properties of the sensing films. The optimized In2O3/NiO film sensor exhibits a high response to 10 ppm NO2 at 145 degrees C with an ultralow detection limit due to the paramount surface active sites and high carrier concentration enabled by the oxygen vacancies.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Multidisciplinary

Novel Christmas Branched Like NiO/NiWO4/WO3 (p-p-n) Nanowire Heterostructures for Chemical Sensing

Navpreet Kaur et al.

Summary: Establishing a platform with different nanostructured oxides is a novel idea for developing highly sensitive and selective sensing devices. The study successfully created 3D-heterostructures consisting of 1D nanowires of NiO and WO3, exhibiting selective behavior towards different gases. The improved sensing performance of the heterostructures is attributed to charge carrier transport through specific interfaces and modulation of charge carriers in the electron depletion layer of WO3 and hole accumulation layer of NiO and NiWO4.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Engineering, Environmental

A high-response formaldehyde sensor based on fibrous Ag-ZnO/In2O3 with multi-level heterojunctions

Jingjing Liu et al.

Summary: A high-response formaldehyde gas sensor based on Ag-ZnO/In2O3 nanofibers was successfully fabricated, showing superior sensitivity, selectivity and stability, with an ultra-high response value towards formaldehyde. The low detection limit of the sensor can be mainly attributed to the proper design of multi-level heterojunctions, which significantly enhance the sensing performance.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Engineering, Environmental

Thin-layered MoS2 nanoflakes vertically grown on SnO2 nanotubes as highly effective room-temperature NO2 gas sensor

Xue Bai et al.

Summary: The fabricated MoS2@SnO2 heterostructure exhibits impressive sensitivity and selectivity for NO2 gas detection at room temperature, with a response value of 34.67 (R-a/R-g) to 100 ppm, fast response and recovery time of 2.2 s and 10.54 s, a low detection limit of 10 ppb, and stability for up to 20 weeks.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Chemistry, Analytical

Daily writing carbon ink: Novel application on humidity sensor with wide detection range, low detection limit and high detection resolution

Zaihua Duan et al.

Summary: By analyzing the physical and chemical properties of daily writing carbon ink, researchers were able to fabricate a high-performance humidity sensor. This sensor showed positive humidity sensitive characteristics, wide detection range, low detection limit, and high detection resolution, making it a promising option for further research in this field.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Instruments & Instrumentation

Surface acoustic device for high response NO2 gas sensor using p-phenylenediamine-reduced graphene oxide nanocomposite coated on langasite

Jung-Bum Lim et al.

Summary: In this study, a SAW device using LGS substrate coated with PrGO was fabricated, showing high sensitivity for detecting NO2 and CO in a short time scale. The PrGO-coated LGS demonstrated higher selectivity for NO2 compared to other gases and the superior sensing mechanism was discussed in relation to the morphological characteristics and configuration of PrGO. Additionally, the effect of humidity on the SAW performance under ambient NO2 was studied.

SMART MATERIALS AND STRUCTURES (2021)

Review Nanoscience & Nanotechnology

1D Metal Oxide Semiconductor Materials for Chemiresistive Gas Sensors: A Review

Bingxin Yang et al.

Summary: This article discusses the development and advantages of nanoscale chemiresistive gas sensors, focusing on the synthesis and performance optimization of 1D metal oxide-based sensing materials. Integration of 1D sensing nanomaterials into sensor devices and their use in emerging electronic nose applications are also explored.

ADVANCED ELECTRONIC MATERIALS (2021)

Article Chemistry, Multidisciplinary

Enhanced Blocking Effect: A New Strategy to Improve the NO2 Sensing Performance of Ti3C2Tx by γ-Poly(L-glutamic acid) Modification

Qiuni Zhao et al.

Summary: The study demonstrates the enhancement of gas sensing properties of Ti3C2Tx by gamma-PGA modification, resulting in improved response to NO2, faster response/recovery time, better reversibility, and repeatability. The improved gas sensing properties of the Ti3C2Tx/gamma-PGA sensor can be attributed to the enhancement of effective adsorption and the blocking effect assisted by water molecules.

ACS SENSORS (2021)

Review Nanoscience & Nanotechnology

Advanced Strategies to Improve Performances of Molybdenum-Based Gas Sensors

Angga Hermawan et al.

Summary: Molybdenum-based materials have been extensively researched for high-performance gas sensor applications due to their tunable structural and physicochemical properties, good durability, low cost, and ease of preparation. Significant advances have been made in designing and fabricating various molybdenum-based sensing materials, but achieving high performance remains challenging.

NANO-MICRO LETTERS (2021)

Article Chemistry, Physical

Hydrothermally derived p-n MoS2-ZnO from p-p MoS2-ZIF-8 for an efficient detection of NO2 at room temperature

Muhammad Ikram et al.

Summary: A hydrothermal method was developed to convert rhombic MoS2@ZIF-8 into rodlike MoS2@ZnO heterostructure, enabling reliable NO2 gas sensing at room temperature.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Physical

Raspberry-like mesoporous Co-doped TiO2 nanospheres for a high-performance formaldehyde gas sensor

Qian Rong et al.

Summary: A new type of cobalt-doped TiO2 nanosphere sensor has been developed, showing high sensitivity, reduced working temperature, and unique selectivity, indicating great potential for future market applications.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Analytical

Two-dimensional Cd-doped porous Co3O4 nanosheets for enhanced room-temperature NO2 sensing performance

Xinwei Chen et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

Article Materials Science, Multidisciplinary

Highly Sensitive, Selective, Stable, and Flexible NO2 Sensor Based on GaSe

Yan-Feng Zhao et al.

ADVANCED MATERIALS TECHNOLOGIES (2020)

Article Engineering, Environmental

Edge-exposed MoS2 nanospheres assembled with SnS2 nanosheet to boost NO2 gas sensing at room temperature

Lujia Liu et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Article Engineering, Environmental

Ultra-sensitive ethanol gas sensors based on nanosheet-assembled hierarchical ZnO-In2O3 heterostructures

Kun Zhang et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Review Nanoscience & Nanotechnology

Room-Temperature Gas Sensors Under Photoactivation: From Metal Oxides to 2D Materials

Rahul Kumar et al.

NANO-MICRO LETTERS (2020)

Article Nanoscience & Nanotechnology

Ag Nanowire-Plasmonic-Assisted Charge Separation in Hybrid Heterojunctions of Ppy-PEDOT:PSS/GaN Nanorods for Enhanced UV Photodetection

Kedhareswara Sairam Pasupuleti et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Review Chemistry, Analytical

Conduction mechanisms in one dimensional core-shell nanostructures for gas sensing: A review

Priyanka Karnati et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Article Engineering, Environmental

Fabrication and characterization of ZnO-TiO2-PANI (ZTP) micro/nanoballs for the detection of flammable and toxic gases

Rakesh K. Sonker et al.

JOURNAL OF HAZARDOUS MATERIALS (2019)

Article Chemistry, Analytical

MOF-derived indium oxide hollow microtubes/MoS2 nanoparticles for NO2 gas sensing

Zhimin Yang et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Article Nanoscience & Nanotechnology

Design of Hetero-Nanostructures on MoS2 Nanosheets To Boost NO2 Room-Temperature Sensing

Yutong Han et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Nanoscience & Nanotechnology

Recovery Improvement for Large-Area Tungsten Diselenide Gas Sensors

Kyung Yong Ko et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Multidisciplinary

Metallic Ti3C2TX MXene Gas Sensors with Ultrahigh Signal-to-Noise Ratio

Seon Joon Kim et al.

ACS NANO (2018)

Article Chemistry, Analytical

Layer-by-layer assembled In2O3 nanocubes/flower-like MoS2 nanofilm for room temperature formaldehyde sensing

Dongzhi Zhang et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Article Engineering, Electrical & Electronic

Construction of Co3O4 nanorods/In2O3 nanocubes heterojunctions for efficient sensing of NO2 gas at low temperature

Dongzhi Zhang et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)

Article Nanoscience & Nanotechnology

Investigation of Microstructure Effect on NO2 Sensors Based on SnO2 Nanoparticles/Reduced Graphene Oxide Hybrids

Ziying Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Acoustics

Preparation of nanostructured and nanosheets of MoS2 oxide using oxidation method

Majed Amini et al.

ULTRASONICS SONOCHEMISTRY (2017)

Article Nanoscience & Nanotechnology

Ultrathin In2O3 Nanosheets with Uniform Mesopores for Highly Sensitive Nitric Oxide Detection

Xue Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Chemistry, Physical

Markedly different adsorption behaviors of gas molecules on defective monolayer MoS2: a first-principles study

Hongxing Li et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)

Article Nanoscience & Nanotechnology

Wide-Range Thermometry at Micro/Nano Length Scales with In2O3 Octahedrons as Optical Probes

Subrata Senapati et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Article Chemistry, Multidisciplinary

Highly Enhanced Gas Adsorption Properties in Vertically Aligned MoS2 Layers

Soo-Yeon Cho et al.

ACS NANO (2015)

Article Chemistry, Physical

Nanoscale Mapping of Layer-Dependent Surface Potential and Junction Properties of CVD-Grown MoS2 Domains

Vishakha Kaushik et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2015)

Article Chemistry, Analytical

In2O3-graphene nanocomposite based gas sensor for selective detection of NO2 at room temperature

Fubo Gu et al.

SENSORS AND ACTUATORS B-CHEMICAL (2015)

Review Chemistry, Analytical

Instability of metal oxide-based conductometric gas sensors and approaches to stability improvement (short survey)

G. Korotcenkov et al.

SENSORS AND ACTUATORS B-CHEMICAL (2011)

Review Chemistry, Analytical

Metal oxide-based gas sensor research: How to?

N. Barsan et al.

SENSORS AND ACTUATORS B-CHEMICAL (2007)

Article Materials Science, Ceramics

Conduction model of metal oxide gas sensors

N Barsan et al.

JOURNAL OF ELECTROCERAMICS (2001)