4.7 Article

Dictating the interfacial stability of nickel-rich LiNi0.90Co0.05Mn0.05O2 via a diazacyclo electrolyte additive-2-Fluoropyrazine

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

An in-depth understanding of the effect of aluminum doping in high-nickel cathodes for lithium-ion batteries

Kai Zhou et al.

Summary: Increasing the Al content in NCA from 0 to 5.6% gradually improves cycling, air stability, lattice structure, and interphase stability, but going beyond 5.6% leads to adverse effects. A 5.6% Al doping is suggested to be optimal, suppressing adverse effects and enhancing electrode/electrolyte interphases for improved performance.

ENERGY STORAGE MATERIALS (2021)

Article Nanoscience & Nanotechnology

Stabilizing Ni-Rich LiNi0.83Co0.12Mn0.05O2 with Cyclopentyl Isocyanate as a Novel Electrolyte Additive

Gaopan Liu et al.

Summary: The study demonstrates that the additive CPI can effectively improve the interfacial stability between Ni-rich cathode materials and carbonate electrolytes, enhancing battery cycle life and capacity retention.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Physical

A Cobalt- and Manganese-Free High-Nickel Layered Oxide Cathode for Long-Life, Safer Lithium-Ion Batteries

Zehao Cui et al.

Summary: This study presents a cobalt- and manganese-free ultrahigh-nickel LiNi0.93Al0.05Ti0.01Mg0.01O2 (NATM) cathode that demonstrates high capacity retention and enhanced thermal stability, outperforming common high-nickel cathodes.

ADVANCED ENERGY MATERIALS (2021)

Article Energy & Fuels

Reactive boride infusion stabilizes Ni-rich cathodes for lithium-ion batteries

Moonsu Yoon et al.

Summary: The use of engineered polycrystalline electrodes in lithium-ion batteries is crucial for cycling stability and safety, but achieving high-quality coatings at both the primary and secondary particle levels can be challenging. A coating-and-infusion approach using cobalt boride metallic glass on a Ni-rich layered cathode has been shown to significantly enhance performance, including rate capability and cycling stability under various conditions. The success of this approach is attributed to the simultaneous suppression of microstructural degradation and side reactions, as well as the critical role of strong selective interfacial bonding in ensuring uniform reactive wetting and facilitating infusion.

NATURE ENERGY (2021)

Article Nanoscience & Nanotechnology

Enhanced Cycle Life and Rate Capability of Single-Crystal, Ni-Rich LiNi0.9Co0.05Mn0.05O2 Enabled by 1,2,4-1H-Triazole Additive

Yue Zou et al.

Summary: A novel electrolyte additive, 1,2,4-1H-triazole (HTZ), was introduced to enhance the interfacial stability and cycle life of LiNi0.9Co0.05Mn0.05O2 (NCM90). HTZ inhibits thermal decomposition of LiPF6 salt and suppresses HF acidic species, leading to the formation of a compact and dense CEI layer. The NCM90 cells with 0.3% HTZ-added electrolyte retain 86.6% of their original capacity after 150 cycles at 30 degrees C.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Physical

Electrolyte Additive cis-1,2,3,6-Tetrahydrophthalic Anhydride Enhanced the Cycle Life of Nickel-Rich LiNi0.9Co0.05Mn0.05O2

Xiaozhen Zhang et al.

Summary: The electrolyte additive THPA enhances the interfacial stability of Ni-rich NCM90 cathode, generating an integrated and compact cathode electrolyte interphase (CEI) film, thereby boosting the capacity retention to 93.2% after 120 cycles.

ACS APPLIED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Microstructure Engineered Ni-Rich Layered Cathode for Electric Vehicle Batteries

Un-Hyuck Kim et al.

Summary: The Nb doping of NCA85 modifies its particle morphology and microstructure, reducing internal strain and improving long-term cycling stability and fast charging capabilities.

ADVANCED ENERGY MATERIALS (2021)

Article Nanoscience & Nanotechnology

Enhancement of Structural, Electrochemical, and Thermal Properties of High-Energy Density Ni-Rich LiNi0.85Co0.1Mn0.05O2 Cathode Materials for Li-Ion Batteries by Niobium Doping

Yehonatan Levartovsky et al.

Summary: In this study, improved structural stability, electrochemical performance, and thermal durability of LiNi0.85Co0.1Mn0.05O2 (NCM85) cathode material were achieved through niobium doping. The relationship between enhanced electrochemical performance and structural stability of the cathode particles was demonstrated. The doping with niobium in NCM85 also resulted in improved thermal characteristics and suppressed crack formation during cycling.

ACS APPLIED MATERIALS & INTERFACES (2021)

Review Chemistry, Analytical

Recent advances in cathode prelithiation additives and their use in lithium-ion batteries

Ruqian Ding et al.

Summary: The growing interest in electric vehicles and energy storage systems has increased the demand for lithium-ion battery technologies capable of providing high capacity and high energy density. Prelithiation of cathodes is a simpler method compared to anode prelithiation, and many studies are focused on finding suitable cathode additives to enhance the electrochemical performance of existing lithium-ion batteries. Challenges in effective cathode prelithiation additives and the development direction of prelithiation technology are discussed in the article.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2021)

Article Chemistry, Physical

Interfacial Enhancement of Silicon-Based Anode by a Lactam-Type Electrolyte Additive

Gaopan Liu et al.

Summary: A lactam-based electrolyte additive, N-acetylcaprolactam (NACA), is explored for stabilizing the LiPF6 salt and adapting to volume changes in a silicon-based anode, leading to increased capacity retention and improved cycling performance in lithium-ion batteries.

ACS APPLIED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Enhanced Interfacial Stability of a LiNi0.9Co0.05Mn0.05O2 Cathode by a Diboron Additive

Yue Zou et al.

Summary: In this study, a diboron electrolyte additive TBDB was introduced to enhance the structural and interfacial stability of Ni-rich cathode, leading to improved long-term cycle life and rate capability of the cathode.

ACS APPLIED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Fluorophosphorus derivative forms a beneficial film on both electrodes of high voltage lithium-ion batteries

Hongyun Yue et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)

Article Chemistry, Physical

Investigation of mechanical property of cylindrical lithium-ion batteries under dynamic loadings

Wenwei Wang et al.

JOURNAL OF POWER SOURCES (2020)

Article Materials Science, Multidisciplinary

High performance well-developed single crystal LiNi0.91Co0.06Mn0.03O2 cathode via LiCl-NaCl flux method

Seung-Hwan Lee et al.

MATERIALS LETTERS (2020)

Review Multidisciplinary Sciences

A reflection on lithium-ion battery cathode chemistry

Arumugam Manthiram

NATURE COMMUNICATIONS (2020)

Review Chemistry, Applied

Performance improvement of lithium -ion battery by pulse current

Shaoqing Zhu et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

Article Chemistry, Physical

Understanding Reactivities of Ni-Rich Li[NixMnyCo1-x-y]O2 Single-Crystal Cathode Materials

Minkyung Kim et al.

ACS APPLIED ENERGY MATERIALS (2020)

Editorial Material Chemistry, Physical

High-Capacity Layered Cathodes for Next-Generation Electric Vehicles

Yang-Kook Sun

ACS ENERGY LETTERS (2019)

Article Nanoscience & Nanotechnology

Enhancing the Structural Stability of Ni-Rich Layered Oxide Cathodes with a Preformed Zr-Concentrated Defective Nanolayer

Bo Han et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Physical

Structural Stability of LiNiO2 Cycled above 4.2 V

Chong S. Yoon et al.

ACS ENERGY LETTERS (2017)

Article Chemistry, Multidisciplinary

Simultaneous Nitrogen Doping and Reduction of Graphene Oxide

Xiaolin Li et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)