Preparation of ethyl cellulose-glycerol tribenzoate microcapsules in CO2/N2-switchable hydrophilicity solvent and solvent recycling

Article Agricultural Engineering

Synergistic effect of ultrasound and switchable hydrophilicity solvent promotes microalgal cell disruption and lipid extraction for biodiesel production

Hao Guo et al.

Summary: In this study, ultrasound-assisted TEPDA was used to destruct the thick cell wall of Nannochloropsis oceanica, reducing cell wall thickness and achieving efficient lipid extraction.

BIORESOURCE TECHNOLOGY (2022)

添加到收藏夹

Article Chemistry, Physical

Preparation and characterization of reusable water/ethylcellulose phase change cold storage microcapsules with high latent heat

Yue Pu et al.

Summary: Water/EC microcapsules prepared by double-emulsion solvent diffusion showed superior thermal storage performance, significantly improved refrigeration capacity, and maintained good performance even after 100 freeze-thaw cycles. They have the potential to be used in short-distance cold chain transport due to their reusability and thermal stability.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

添加到收藏夹

Review Automation & Control Systems

Ultrasonic welding of fiber-reinforced thermoplastic composites: a review

Haijun Li et al.

Summary: This paper reviewed the latest advances in ultrasonic welding technology for fiber-reinforced thermoplastic composites, comparing its advantages and disadvantages with other welding methods, and discussing the influence of ultrasonic welding parameters on welding quality. The paper also summarized ultrasonic welding of dissimilar materials, and discussed quality inspection and repair for ultrasonic composite welding. Finally, an analysis of the research status and development prospects for ultrasonic welding in thermoplastic composites was provided.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Review Polymer Science

Nanomaterials for application in wound Healing: current state-of-the-art and future perspectives

Manal Aly Shalaby et al.

Summary: Nanoparticles play a crucial role in drug delivery for biocompatible agents in the field of wound healing. This article reviews the current state-of-the-art and future concerns regarding the use of nanomaterials in different systems for wound healing. It provides comprehensive guidance for healthcare professionals to choose the proper materials for wound healing to avoid complications.

JOURNAL OF POLYMER RESEARCH (2022)

添加到收藏夹

Review Polymer Science

Role of crosslinkers for synthesizing biocompatible, biodegradable and mechanically strong hydrogels with desired release profile

Saman Zafar et al.

Summary: Hydrogels have become a promising candidate for drug delivery and tissue engineering systems due to their swellable and porous nature. Traditional toxic crosslinkers have poor water solubility and low biodegradation rate, leading to the development of new natural and synthetic crosslinking agents to improve mechanical properties. Novel non-toxic crosslinkers are being introduced to modulate release characteristics and achieve controlled drug release profiles for hydrogels made up of soluble and erodible polymers.

POLYMER BULLETIN (2022)

添加到收藏夹

Review Polymer Science

Rational design of tapered multiblock copolymers for thermoplastic elastomers

Marvin Steube et al.

Summary: Thermoplastic elastomers (TPEs) combine the characteristics of vulcanized rubbers and thermoplastic materials, resulting in soft, flexible, and resilient properties. Various polymerization strategies have been successfully used to synthesize TPE materials on an industrial scale. This review focuses on multiblock structures and gradient copolymers, discussing key parameters of molecular architecture for designing tailored TPE materials.

PROGRESS IN POLYMER SCIENCE (2022)

添加到收藏夹

Article Polymer Science

Binders Used for the Manufacturing of Composite Materials by Liquid Composite Molding

Ivan V. Terekhov et al.

Summary: Binders, or tackifiers, are widely used in the production of new composite materials by liquid composite molding techniques. They stabilize preforms and improve fracture toughness of the composites. This article reviews the research from the 1960s to the present on the creation and properties of binders used in composite materials manufacturing. The influence of binders on preforming process, properties of preforms, and characteristics of the obtained composites are discussed.

POLYMERS (2022)

添加到收藏夹

Article Polymer Science

Preparation of Melamine/Rice Husk Powder Coated Shellac Microcapsules and Effect of Different Rice Husk Powder Content in Wall Material on Properties of Wood Waterborne Primer

Xiaoxing Yan et al.

Summary: The study prepared shellac microcapsules coated with melamine/rice husk powder by in-situ polymerization. The effect of microcapsules with different wall material ratios on the performance of wood waterborne primer coating was investigated. The results showed that the content of rice husk powder was the most important factor affecting the performance of microcapsules. The water-based primer coating with 5.5% rice husk powder and 6% microcapsule powder had the best comprehensive performance.

POLYMERS (2022)

添加到收藏夹

Article Polymer Science

Rheological Considerations in Processing Self-Reinforced Thermoplastic Polymer Nanocomposites: A Review

Mohamed Yousfi et al.

Summary: This paper discusses the major factors influencing the formation of self-reinforced nanofibrillar polymer composite (NFC) materials throughout manufacturing steps. The rheological considerations allowing the prediction of in situ nanofibrillation during melt blending and post-processing, as well as the methods of production of these polymer nanocomposites, are described. The major challenges related to the future development in the field of NFCs are addressed.

POLYMERS (2022)

添加到收藏夹

Review Engineering, Manufacturing

Advances in polymers based Multi-Material Additive-Manufacturing Techniques: State-of-art review on properties and applications

A. Garcia-Collado et al.

Summary: Recently, there has been a growing demand and interest in Multi-Material Additive Manufacturing (MMAM). This study aims to uncover essential knowledge in this field by using a review methodology. The study identifies and discusses limitations in software and hardware, interface bonding strength of dissimilar materials, polymer reinforcement with continuous fiber, polymer-based multi-materials, as well as future challenges. The review process involves checking topics, conducting database searches, and collecting information in tables for discussion and assessment.

ADDITIVE MANUFACTURING (2022)

添加到收藏夹

Article Food Science & Technology

Sodium Caseinate and Acetylated Mung Bean Starch for the Encapsulation of Lutein: Enhanced Solubility and Stability of Lutein

Yifan Lu et al.

Summary: This study investigated the preparation and properties of lutein emulsions and microcapsules using different ratios of sodium caseinate to acetylated mung bean starch. The results showed that increasing the sodium caseinate content improved the emulsion effect and the yield and solubility of microcapsules, while reducing the particle size. The encapsulation efficiency of lutein microcapsules ranged from 69.72% to 89.44%. The thermal analysis revealed an endothermic transition temperature of approximately 125 degrees Celsius for the lutein microcapsules. Microcapsules with sodium caseinate as the single wall material exhibited the lowest stability.

FOODS (2022)

添加到收藏夹

Review Chemistry, Inorganic & Nuclear

Biodegradable two-dimensional nanomaterials for cancer theranostics

Nengyi Ni et al.

Summary: Two-dimensional nanomaterials have great potential in cancer applications, but their potential long-term toxicity is a major obstacle. Biodegradable 2D nanomaterials with good in vivo metabolism and biological safety are an upcoming key breakthrough in cancer nanotheranostics research.

COORDINATION CHEMISTRY REVIEWS (2022)

添加到收藏夹

Article Polymer Science

Preparation and evaluation of self-healing microcapsules for asphalt based on response surface optimization

Jia Li et al.

Summary: The study optimized the preparation process of asphalt self-healing microcapsules and established a prediction model for core content; the results showed that microcapsules can delay core damage in high temperature environment and have high Young's modulus and hardness according to nanoindentation test.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

添加到收藏夹

Article Energy & Fuels

Experimental study on rheological and settling properties of shape memory polymer for fracture sealing in geothermal formations

Abdelmjeed Mohamed et al.

Summary: This study investigated the rheology and annular flow of a smart lost circulation material (LCM) at 160 degrees C, by adding different concentrations of SMP particles to the base fluid. The SMP was found to be activated at high temperatures, increasing particle size for better sealing efficiency. The results show high shear-thinning behavior and excellent suspension at 1.0 wt% concentration, with potential applications for optimizing lost circulation treatment in various systems and geometries.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2022)

添加到收藏夹

Review Polymer Science

Application of microencapsulation technology in silk fibers

Zuobing Xiao et al.

Summary: This article introduces the application of microencapsulation technology in silk fiber. By encapsulating functional materials, the value of silk can be enhanced and new functions can be added. Microcapsules can protect the functional materials and release them under specific external conditions to achieve the desired effects.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Building micro-capsules using water-in-water emulsion droplets as templates

Adeline Perro et al.

Summary: The use of templates in materials chemistry is a well-established approach for producing membrane bounded hollow spheres. Water-in-water emulsion droplets have emerged as promising alternative templates to produce capsules in solvent-free conditions, offering practical importance in materials chemistry.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

添加到收藏夹

Review Biochemistry & Molecular Biology

The Role of Microencapsulation in Food Application

Mariel Calderon-Oliver et al.

Summary: Modern microencapsulation techniques have various applications in the food industry, offering protection to active molecules and substances and contributing to the development of functional food products and preservation. Microencapsulation also plays a role in improving sensory aspects of food products.

MOLECULES (2022)

添加到收藏夹

Review Green & Sustainable Science & Technology

A comprehensive review on dielectric composites: Classification of dielectric composites

Hari Prashanth Palani Velayuda Shanmugasundram et al.

Summary: This review paper summarizes the complete discoveries of dielectric materials from ceramics to polymer composites and explores their applications. It discusses the basic principles of dielectric behavior in composites systems and how polarization models are intertwined with composite fabrication. The study thoroughly investigates the combinations of different components in composites for engineering solutions. It also classifies and reviews recent discoveries of dielectric composite materials, focusing on ceramic-based composites, polymer-ceramic composites, natural fiber reinforced polymer composites, and bio-based polymer composites. Additionally, the processing techniques of these dielectric materials are comprehensively reviewed, along with their prominent applications.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

添加到收藏夹

Article Polymer Science

Research on the Application of Synthetic Polymer Materials in Contemporary Public Art

Yajun Zhang et al.

Summary: This review summarizes the application methods and current situation of synthetic polymer materials in public art, analyzes the reasons behind them, and points out the deficiencies in this research field. Finally, it puts forward the development trend of the interaction between synthetic polymer materials and public art.

POLYMERS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Manufacturing polymeric porous capsules

Claudia Contini et al.

Summary: Polymeric porous capsules hold great promise for applications in drug delivery, chemical microreactors, artificial cell science, and synthetic biology by enabling size-selective material exchange with their surroundings.

CHEMICAL COMMUNICATIONS (2022)

添加到收藏夹

Review Food Science & Technology

Microencapsulation of essential oils by complex coacervation method: preparation, thermal stability, release properties and applications

Bertrand Muhoza et al.

Summary: This review summarizes the thermal properties of essential oil microcapsules prepared by complex coacervation method and their applications in food and pharmaceutical industries. The factors affecting coacervation and thermal properties are discussed, and the physicochemical properties and release characteristics of microencapsulation processes are described. The study shows that essential oil microcapsules prepared by complex coacervation exhibit high thermal stability, making them suitable for processing and storage under high temperature conditions.

CRITICAL REVIEWS IN FOOD SCIENCE AND NUTRITION (2022)

添加到收藏夹

Article Engineering, Environmental

Synthesis and Characterization of PVA/Starch Hydrogel Membranes Incorporating Essential Oils Aimed to be Used in Wound Dressing Applications

Farrukh Altaf et al.

Summary: Recent research has shown that wound healing is promoted in a moist environment, and incorporating clove oil as an antibacterial agent in fabricated hydrogel membranes can achieve optimized antibacterial activity and mechanical strength.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2021)

添加到收藏夹

Article Engineering, Environmental

Immobilization of laccase on phase-change microcapsules as self-thermoregulatory enzyme carrier for biocatalytic enhancement

Peng Cao et al.

Summary: A self-thermo-regulatory enzyme carrier system was designed to improve the biocatalytic activity of laccases at high temperatures and enhance thermal and storage stabilities. The novel enzyme carrier demonstrated outstanding performance in reliability, phase-change reversibility, and tolerance, suitable for practical biocatalytic applications.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Understanding the switchable solvent extraction of phospholipids from dairy byproducts

Kaavya Rathnakumar et al.

Summary: This study extracted phospholipids from buttermilk and beta-serum using CyNMe2 as a solvent, with higher recovery rates and concentrations compared to traditional Folch method. The predominant phospholipids found in the extracts were phosphatidylcholine and phosphatidylinositol, indicating CyNMe2's potential for efficient extraction of phospholipids from dairy byproducts.

FOOD AND BIOPRODUCTS PROCESSING (2021)

添加到收藏夹

Article Chemistry, Applied

Properties and kinetics of the in vitro release of anthocyanin-rich microcapsules produced through spray and freeze-drying complex coacervated double emulsions

Nattapong Kanha et al.

Summary: Microcapsules were prepared using complex coacervation of gelatin-acacia gum and chitosan-carboxymethylcellulose, with spray-dried microcapsules showing higher efficiency and lower moisture content. Release kinetics were best described by first-order and Higuchi models for spray and freeze-dried microcapsules, indicating diffusion-controlled release in gastric fluid and erosion-controlled release in intestinal fluid. These microcapsules show potential for controlled release of anthocyanins as nutraceuticals.

FOOD CHEMISTRY (2021)

添加到收藏夹

Article Polymer Science

Preparation and performance evaluation of hydrophobically associating polymer anti-water channeling agent for oil well cement

Qian Feng et al.

Summary: By synthesizing a hydrophobic associative polymer (SMAL), the anti-water channeling ability of cement slurry was significantly improved, while maintaining the rheological properties of the cement slurry.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

添加到收藏夹

Article Engineering, Environmental

Mimic Enzyme Based Cellulose Nanocrystals/PVA Nanocomposite Membranes for Enrichment of Biogas as a Natural Gas Substitute

Zaib Jahan et al.

Summary: The addition of mimic enzyme has been found to enhance the separation performance of nanocomposite membranes, with optimal results achieved at 5 mu mol/g addition at pH 10. In addition, the presence of moisture content affects the activity of the mimic enzyme.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2021)

添加到收藏夹

Review Polymer Science

Micellar Drug Delivery Systems Based on Natural Biopolymers

Leonard Ionut Atanase

Summary: Micellar drug delivery systems based on natural biopolymers offer advantages such as compatibility, biodegradability, high drug loading, and passive accumulation, but their clinical use is not yet widespread.

POLYMERS (2021)

添加到收藏夹

Article Polymer Science

Preparation and Characterisation of Sustainable Wood Plastic Composites Extracted from Municipal Solid Waste

Shahnaz Shahani et al.

Summary: The study focused on recycling plastic waste by manufacturing wood-plastic composites with improved mechanical properties. Increasing the wood powder ratio resulted in higher bending strength, while reducing the water swelling ratio of the plastic matrix and wood particles led to better mechanical properties. The type of wood species also played a key role in determining the dimensional stability and mechanical properties of the composites.

POLYMERS (2021)

添加到收藏夹

Review Biophysics

Nanoemulsions for synthesis of biomedical nanocarriers

Asmaa Elzayat et al.

Summary: This article discusses the different possibilities of using nanoemulsions to prepare biomedical nanocarriers, including polymeric, inorganic, or hybrid materials. The main synthetic strategies for each type include miniemulsion polymerization, nanoemulsion-solvent evaporation, spontaneous emulsification, sol-gel processes, and a combination of different techniques to form multicomponent materials.

COLLOIDS AND SURFACES B-BIOINTERFACES (2021)

添加到收藏夹

Article Chemistry, Physical

Preparation of dual-chamber microcapsule by Pickering emulsion for self-healing application with ultra-high healing efficiency

Kaiyun Wu et al.

Summary: This work introduced a new concept for designing dual-chamber self-healing microcapsules using Pickering emulsion photopolymerization, achieving impressive self-healing efficiency. By varying the species of curing agent, healing agent, and wall materials, the prepared dual-chamber microcapsules can meet the requirements of versatile self-healing systems.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Core-Shell Microcapsules from Unpurified Legume Flours

Xiufeng Li et al.

Summary: This study presents a method for creating a soft functional material directly from legume flours, by extracting globulins from soy and pea flours and mixing them with gum arabic to form a coacervate. The low interfacial tensions of the coacervates promote the deposition of a shell of coacervate material around oil droplets, demonstrating the potential fabrication of precise core-shell microcapsules from plant-based ingredients.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Materials Science, Biomaterials

Nano architectured cues as sustainable membranes for ultrafiltration in blood hemodialysis

Muhammad Ali et al.

Summary: The research aimed to reduce the adsorption of protein-bound and uremic toxins using mordenite zeolite as an adsorbent and different pore generating agents. The experiments showed that the concentration of mordenite zeolite affects membrane performance, with larger pore size leading to decreased solute rejection but increased creatinine uptake level.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Block Copolymer Synthesis by the Combination of Living Cationic Polymerization and Other Polymerization Methods

Asmita Dey et al.

Summary: The synthesis of block copolymers is limited by the use of polymerization techniques, but controlled living polymerization techniques can play a key role in this field, bringing revolutionary advances to the polymer industry. By combining different polymerization techniques, new block copolymer systems with improved properties can be designed.

FRONTIERS IN CHEMISTRY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Intensified recovery of switchable hydrophilicity solvents in flow

Suyong Han et al.

Summary: In this study, an integrated flow chemistry strategy using two membrane-based flow reactors was developed to enhance the extraction and recovery rates of switchable hydrophilicity solvents (SHSs). The overall single-pass recovery efficiency for 2-(dibutyl amino)ethanol was achieved at 60.1%, representing a significant improvement compared to batch reactors.

CHEMICAL COMMUNICATIONS (2021)

添加到收藏夹

Review Polymer Science

Photoinitiating systems and kinetics of frontal photopolymerization processes - the prospects for efficient preparation of composites and thick 3D structures

Filip Petko et al.

Summary: Frontal polymerisation has gained increasing interest in various applications in recent years, with its ability to cure thick samples with different fillers using a reasonable portion of energy. It offers promising applications in materials science, industry, and 3D structure preparation. Additionally, the combination of frontal polymerisation and light curing provides a convenient and versatile method, especially for heat sensitive materials or dentistry applications.

POLYMER CHEMISTRY (2021)

添加到收藏夹

Article Polymer Science

Synthesis of well-defined diblock copolymer nano-objects by RAFT non-aqueous emulsion polymerization of N-(2-acryloyloxy)ethyl pyrrolidone in non-polar media

R. R. Gibson et al.

Summary: Polymerization-induced self-assembly (PISA) is a powerful technique for preparing diblock copolymer nano-objects in various solvents. A non-aqueous emulsion polymerization formulation was reported here, producing sterically-stabilized spherical nanoparticles at a relatively high temperature with long precursor chains for colloidal stability. Despite challenges in accurate sizing of nanoparticles by TEM, introducing a third block to covalently crosslink the nanoparticle cores enabled identification of spherical morphology. Such nanoparticles also proved effective in producing oil-in-water Pickering emulsions.

POLYMER CHEMISTRY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Intensified continuous extraction of switchable hydrophilicity solvents triggered by carbon dioxide†

Suyong Han et al.

Summary: This study explores the feasibility of utilizing and recovering green solvents with switchable hydrophilicity solvents, presenting an intensified continuous flow strategy and providing accurate in situ reaction monitoring and a scalable green solvent extraction route.

GREEN CHEMISTRY (2021)

添加到收藏夹

Article Materials Science, Paper & Wood

Study on properties and application of pyrophosphate flame retardant microcapsules prepared from hemicellulose maleate

Linya Zhang et al.

CELLULOSE (2020)

添加到收藏夹

Article Polymer Science

Preparation of imidazole embedded polyurea microcapsule for latent curing agent

Liyang Zhao et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Sustainable green technology for recovery of cotton fibers and polyester from textile waste

Samy Yousef et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Article Chemistry, Physical

Magnetic effervescence tablet-assisted switchable hydrophilicity solvent-based liquid phase microextraction of triazine herbicides in water samples

Xu Jing et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

添加到收藏夹

Article Engineering, Chemical

Hybrid Extraction of Oily Sludge by Tertiary Amines and Protonated Tertiary Amines

Shanshan Dai et al.

CHEMICAL ENGINEERING & TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Biomaterials

Tuning Microcapsule Shell Thickness and Structure with Silk Fibroin and Nanoparticles for Sustained Release

Yongfeng Wang et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2020)

添加到收藏夹

Article Chemistry, Physical

Synthesis and characterization of microencapsulated methyl laurate with polyurethane shell materials via interfacial polymerization in Pickering emulsions

Zhiqiang Wang et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)

添加到收藏夹

Article Engineering, Chemical

Catalytic Activity of Pt Loaded Zeolites for Hydroisomerization of n-Hexane Using Supercritical CO2

Usama A. Al-Rawi et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synthesis, Characterization, and Assessment of a CeO2@Nanoclay Nanocomposite for Enhanced Oil Recovery

Mohammad Javad Nazarahari et al.

NANOMATERIALS (2020)

添加到收藏夹

Article Materials Science, Characterization & Testing

Biogas upgrading with novel cellulose nano-crystals and polyvinyl amine nanocomposite membranes

Uzair Saeed et al.

POLYMER TESTING (2020)

添加到收藏夹

Review Chemistry, Physical

Fabrication and application of complex microcapsules: a review

Mohamed Gibril Bah et al.

SOFT MATTER (2020)

添加到收藏夹

Article Chemistry, Physical

Preparation and Short-Term Aging Properties of Asphalt Modified by Novel Sustained-Release Microcapsules Containing Rejuvenator

Xin Yan et al.

MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enhanced Oil Recovery by a Suspension of Core-Shell Polymeric Nanoparticles in Heterogeneous Low-Permeability Oil Reservoirs

Yunqian Long et al.

NANOMATERIALS (2019)

添加到收藏夹

Review Engineering, Biomedical

Recent progress in preparation and agricultural application of microcapsules

Ting Li et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2019)

添加到收藏夹

Article Thermodynamics

Physicochemical properties of switchable-hydrophilicity solvent systems: N,N-Dimethylcyclohexylamine, water and carbon dioxide

Jian Wang et al.

JOURNAL OF CHEMICAL THERMODYNAMICS (2019)

添加到收藏夹

Article Chemistry, Applied

Surface-modified poly(methyl methacrylate) microcapsules containing linseed oil for application in self-healing epoxy-based coatings

Amir H. Navarchian et al.

PROGRESS IN ORGANIC COATINGS (2019)

添加到收藏夹

Article Engineering, Chemical

A switchable hydrophilicity solvent mediated process to prepare fine silica aerogel powder as an excellent flatting agent

Bernard Baffour et al.

ADVANCED POWDER TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Environmental

Selective separation of solvent from deasphalted oil using CO2 for heavy oil upgrading process based on solvent deasphalting

Soo Ik Im et al.

CHEMICAL ENGINEERING JOURNAL (2018)

添加到收藏夹

Article Chemistry, Physical

Synthesis and characterization of ethyl cellulose micro/nanocapsules using solvent evaporation method

Sogand Abbaspoor et al.

COLLOID AND POLYMER SCIENCE (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Switchable hydrophilicity solvents for carbon dioxide chemical absorption

Mario Carrera et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2018)

添加到收藏夹

Review Chemistry, Physical

Research Advances of Microencapsulation and Its Prospects in the Petroleum Industry

Miaomiao Hu et al.

MATERIALS (2017)

添加到收藏夹

Review Chemistry, Multidisciplinary

CO2-responsive polymeric materials: synthesis, self-assembly, and functional applications

Ali Darabi et al.

CHEMICAL SOCIETY REVIEWS (2016)

添加到收藏夹

Review Polymer Science

Self-healing polymeric materials based on microencapsulated healing agents: From design to preparation

Dong Yu Zhu et al.

PROGRESS IN POLYMER SCIENCE (2015)

添加到收藏夹

Article Engineering, Environmental

Surfactant assisted nano-composite cation exchanger: Development, characterization and applications for the removal of toxic Pb2+ from aqueous medium

M. Naushad

CHEMICAL ENGINEERING JOURNAL (2014)

添加到收藏夹

Article Polymer Science

Microencapsulation of n-hexadecane phase change material by ethyl cellulose polymer

Tivadar Feczko et al.

POLYMER BULLETIN (2014)

添加到收藏夹

Review Polymer Science

Phenolic film engineering for template-mediated microcapsule preparation

Hirotaka Ejima et al.

POLYMER JOURNAL (2014)

添加到收藏夹

Article Chemistry, Physical

Preparation and characterization of ethyl cellulose-based core-shell microcapsules containing plant oils

S. M. Mirabedini et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Organic solvent nanofiltration: a potential alternative to distillation for solvent recovery from crystallisation mother liquors

Elin M. Rundquist et al.

GREEN CHEMISTRY (2012)

添加到收藏夹

Article Chemistry, Physical

Preparation of aminosilane-alginate hybrid microcapsules and their use for enzyme encapsulation

Fumio Kurayama et al.

JOURNAL OF MATERIALS CHEMISTRY (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Sustained release of ethyl cellulose micro-particulate drug delivery systems prepared using electrospraying

Li-Ya Huang et al.

JOURNAL OF MATERIALS SCIENCE (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tertiary amine solvents having switchable hydrophilicity

Philip G. Jessop et al.

GREEN CHEMISTRY (2011)

添加到收藏夹

Article Chemistry, Multidisciplinary

A solvent having switchable hydrophilicity

Philip G. Jessop et al.

GREEN CHEMISTRY (2010)

添加到收藏夹

Article Chemistry, Multidisciplinary

Fabrication of ethyl cellulose microspheres: Chitosan solution as a stabilizer

Xiao Wei Li et al.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2008)

添加到收藏夹

Preparation of ethyl cellulose-glycerol tribenzoate microcapsules in CO2/N2-switchable hydrophilicity solvent and solvent recycling

相关参考文献

导出引文

分享论文