☆ 4.7 Article

Experimental investigation on heat transfer performance of solar collector with baffles and semicircular loops fins under varied air mass flow rates

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Heat transfer augmentation of flat plate solar collector through finite element-based parametric study

Poonam Rani et al.

Summary: The introduction of fins and baffles on the absorber plate in a flat plate solar collector can improve the thermal performance, although it may cause a pumping power penalty. This study investigated the incorporation of hollow semicircular loop fins and rectangular baffles to enhance the overall performance of the collector. The continuous staggered arrangement of semicircular loops was found to be more effective. The finned collector exhibited higher Nusselt number, thermal efficiency, and collector outlet air temperature.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2022)

添加到收藏夹

Article Thermodynamics

Experimental study of thermal performance and pressure drop on a solar air heater with different orientations of arc-shape rib roughness

Mukesh Kumar Sahu et al.

Summary: The experimental investigation on artificially roughened solar air heaters showed that the arc-shape wire with apex-upstream flow SAH outperformed other configurations in terms of thermal efficiency. It significantly enhanced the thermal performance under the operating parameters studied.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

添加到收藏夹

Article Thermodynamics

Dynamic performance modeling and operation strategies for a v-corrugated flat-plate solar collector with movable cover plate

Yan Jiang et al.

Summary: Research on applying an automatic movable cover plate to improve the performance of flat plate solar collectors can reduce heat loss, prevent overheating, and enhance the operational efficiency of the collectors in various environments.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Energetic and exergetic efficiency analysis of a v-corrugated solar air heater integrated with twisted tape inserts

Ammar A. Farhan et al.

Summary: This study provides an analytical and numerical investigation of the energy and exergy analysis of a VCSAH integrated with TTI, revealing that the thermo-hydraulic efficiency initially rises to a peak value at a specific Reynolds number as the twisted tape ratio decreases. The optimal number of channels for maximum thermohydraulic efficiency is found to be 5 when TTI is implemented. The thermal efficiency and thermohydraulic efficiency are directly proportional to the number of channels implemented in the VCSAH-TTI system.

RENEWABLE ENERGY (2021)

添加到收藏夹

Article Thermodynamics

Thermo-hydraulic performance of a solar air heater with staggered C-shape finned absorber plate

A. Saravanan et al.

Summary: The experimental investigation focused on the thermo-hydraulic performance of a solar air heater with staggered multiple C-shape perforated and non-perforated finned absorber plate. Results indicated that the perforated finned absorber plate outperformed the smooth plate absorber plate, especially with relative pitch to gap ratio 3.8 and relative height ratio 0.6.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

添加到收藏夹

Article Thermodynamics

Constructal design of different ribs for thermo-fluid performance enhancement of a solar air heater (SAH)

Ashok K. Barik et al.

Summary: In this study, the constructal theory was utilized to develop six new types of ribs for a solar air heater, and their performance was numerically investigated using computational fluid dynamics. It was found that the T-rib showed the highest Nusselt number and lowest friction factor among all considered ribs, leading to enhanced heat transfer efficiency in the solar air heater.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

添加到收藏夹

Article Thermodynamics

Thermo-hydraulic performance analysis of a solar air heater (SAH) with quarter-circular ribs on the absorber plate: A comparative study

Yadaba Mahanand et al.

Summary: This study numerically investigates the thermo-hydraulic characteristics of a solar air heater with quarter-circular ribs on the absorber plate. Three different rib arrangements are compared, with varying flow and roughness parameters. The impact of relative roughness pitch and Reynolds number on the optimized rib geometry and thermal enhancement ratio is analyzed, resulting in proposed correlations for Nusselt number and friction factor through non-linear regression analysis.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

添加到收藏夹

Article Energy & Fuels

Numerical analysis of a solar air heater with circular perforated absorber plate

Shreyas P. Shetty et al.

Summary: Numerical analysis of a solar air heater with perforated circular absorber plate shows that increasing the vent diameter and quantity significantly improves thermohydraulic efficiency by causing vortex formation and increasing turbulence induced heat transfer.

SOLAR ENERGY (2021)

添加到收藏夹

Article Thermodynamics

Performance assessment of flat-plate solar collector with internal fins and porous media through an integrated approach of CFD and experimentation

Rohan Kansara et al.

Summary: Linear Fresnel Reflectors are commonly used in concentrated solar power plants, but conventional LFR plants often require specialized heat transfer fluids. This study investigates a novel flat-plate solar collector with internal longitudinal fins and porous media using atmospheric air as a working fluid. Results show that the porous media has the highest heat transfer efficiency compared to fins and other geometries, with a 16.17% improvement in air temperature rise for a collector filled with porous media compared to an empty channel.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

添加到收藏夹

Article Thermodynamics

Study of solar air heater with discrete arc ribs geometry: Experimental and numerical approach

Rajnish Azad et al.

Summary: This study investigates the impact of different parameters on the performance of a novel solar air heater design, finding that under specific conditions, the new discrete arc rib geometry can significantly enhance Nusselt number and thermohydraulic performance, outperforming the existing V-rib design.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

添加到收藏夹

Article Thermodynamics

Thermal performance enhancement of solar air collector using a novel V-groove absorber plate with pin-fins for drying agricultural products: an experimental study

P. Sudhakar et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

添加到收藏夹

Article Energy & Fuels

Evaluation of the performance of an improved solar air heater with S shaped ribs with gap

Dengjia Wang et al.

SOLAR ENERGY (2020)

添加到收藏夹

Article Energy & Fuels

Study of the performance of double pass solar air heater of a new designed absorber: An experimental work

Saleh Abo-Elfadl et al.

SOLAR ENERGY (2020)

添加到收藏夹

Article Energy & Fuels

Parametric sensitivity analysis and optimisation of a solar air heater with multiple rows of longitudinal vortex generators

Daniel J. Dezan et al.

APPLIED ENERGY (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Effect of turbulator modifications on the thermal performance of cost-effective alternative solar air heater

Faraz Afshari et al.

RENEWABLE ENERGY (2020)

添加到收藏夹

Article Thermodynamics

Thermal enhancement study of a transverse inverted-T shaped ribbed solar air heater

Yadaba Mahanand et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Energy & Fuels

Thermal characteristics of a flat plate solar collector: Influence of air mass flow rate and correlation analysis among process parameters

Poonam Rani et al.

SOLAR ENERGY (2020)

添加到收藏夹

Review Thermodynamics

Enhancement of convective heat transfer in smooth air channels with wall-mounted obstacles in the flow path: A review

Younes Menni et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

添加到收藏夹

Article Energy & Fuels

Thermal and thermo-hydraulic analysis of arc shaped rib roughened solar air heater integrated with fins and baffles

P. T. Saravanakumar et al.

SOLAR ENERGY (2019)

添加到收藏夹

Article Energy & Fuels

An experimental investigation of a double pass solar air heater performance: A comparison between natural and forced air circulation processes

Mothana M. Mohamed Salih et al.

SOLAR ENERGY (2019)

添加到收藏夹

Article Thermodynamics

Analytical investigation of exergetic performance on jet impingement solar air heater with multiple arc protrusion obstacles

M. M. Matheswaran et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

添加到收藏夹

Article Thermodynamics

Experimental thermodynamic analysis of a forced convection solar air heater using absorber plate with pin-fins

S. Sivakumar et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

添加到收藏夹

Article Thermodynamics

Energy and exergy analysis of solar air heater having new design absorber plate with conical surface

Mesut Abuska

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Thermodynamics

Numerical study on flow structure and heat transfer in a circular tube integrated with novel anchor shaped inserts

Sunil Chamoli et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Thermodynamics

Nusselt number and friction factor correlations for forced convective type counter flow solar air heater having discrete multi V shaped and staggered rib roughness on both sides of the absorber plate

Ravi Kant Ravi et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Energy & Fuels

Mathematical modeling and performance analysis of a solar air collector with slit-perforated corrugated plate

Huan Zhang et al.

SOLAR ENERGY (2018)

添加到收藏夹

Article Energy & Fuels

CFD analysis of solar air heater duct having square wave profiled transverse ribs as roughness elements

Inderjeet Singh et al.

SOLAR ENERGY (2018)

添加到收藏夹

Article Energy & Fuels

Thermal performance improvement of a solar air heater fitted with winglet vortex generators

Sunil Chamoli et al.

SOLAR ENERGY (2018)

添加到收藏夹

Article Energy & Fuels

Performance evaluation of a new counter flow double pass solar air heater with turbulators

A. S. Abdullah et al.

SOLAR ENERGY (2018)

添加到收藏夹

Article Thermodynamics

Performance enhancement of solar air heater using herringbone corrugated fins

Rajesh Kumar et al.

ENERGY (2017)

添加到收藏夹

Article Energy & Fuels

Energy, exergy, economic and environmental (4E) analyses of flat-plate and V-groove solar air collectors based on aluminium and copper

Mesut Abuska et al.

SOLAR ENERGY (2017)

添加到收藏夹

Article Energy & Fuels

Thermal performance analysis of a metal corrugated packing solar air collector in cold regions

Wandong Zheng et al.

APPLIED ENERGY (2017)

添加到收藏夹

Article Thermodynamics

Thermal characteristic of a turbulent flow through a circular tube fitted with perforated vortex generator inserts

Sunil Chamoli et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Thermal characteristics of a glazed transpired solar collector with perforating corrugated plate in cold regions

Wandong Zheng et al.

ENERGY (2016)

添加到收藏夹

Article Energy & Fuels

Thermal and thermohydraulic performance of wavy finned absorber solar air heater

Abhishek Priyam et al.

SOLAR ENERGY (2016)

添加到收藏夹

Article Thermodynamics

Exergetic performance evaluation of solar air heater having V-down perforated baffles on the absorber plate

S. Chamoli et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2014)

添加到收藏夹

Proceedings Paper Energy & Fuels

Analysis of heat transfer and fluid flow in different shaped roughness elements on the absorber plate solar air heater duct

Anil Kumar

2013 ISES SOLAR WORLD CONGRESS (2014)

添加到收藏夹

Article Energy & Fuels

Analysis of fluid flow and heat transfer in a rib grit roughened surface solar air heater using CFD

S. V. Karmare et al.

SOLAR ENERGY (2010)

添加到收藏夹

Article Thermodynamics

Performance investigation of flat plate, v-corrugated and finned air collectors

MA Karim et al.

ENERGY (2006)

添加到收藏夹

Article Thermodynamics

Comparison of heating and natural ventilation in a solar house induced by two roof solar collectors

XQ Zhai et al.

APPLIED THERMAL ENGINEERING (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.