☆ 4.7 Article

Investigation of the entropy production rate of ferrosoferric oxide/water nanofluid in outward corrugated pipes using a two-phase mixture model

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Experimental investigation on the performance of hybrid Fe3O4 coated MWCNT/Water nanofluid as a coolant of a Plate heat exchanger

A. M. Alklaibi et al.

Summary: Experimental investigation of MWCNT + Fe3O4/water hybrid nanofluids as a coolant for a plate heat exchanger showed improved exergy efficiency, thermal performance factor, and effectiveness compared to de-ionized water, indicating the potential for enhancing heat transfer efficiency. The study also revealed a tradeoff between flow rate and cost, suggesting that operating at 5 lpm would be the most cost-effective option.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

添加到收藏夹

Article Engineering, Chemical

Second law performance of a novel four-layer microchannel heat exchanger operating with nanofluid through a two-phase simulation

Nima Mazaheri et al.

Summary: This study conducts a 3D two-phase analysis to evaluate the second law features of a counter-flow microchannel heat exchanger operating with a nanofluid. The results show that suspending more nanoparticles can reduce the thermal irreversibility of the nanofluid, but it increases the thermal irreversibility of the cold water. The volume fraction of the nanofluid has different effects on the exergy destruction and entropy generation at different flow rates.

POWDER TECHNOLOGY (2022)

添加到收藏夹

Article Thermodynamics

Numerical investigation of swirling flow and heat transfer of a nanofluid in a tube with helical ribs using a two-phase model

Roohollah Hosseini Monfared et al.

Summary: In this research, fluid flow and heat transfer of a water/Al2O3 nanofluid in a tube with helical ribs were investigated. The results indicated that as Reynolds number increases, heat transfer increases, and friction factor decreases, with helical ribs enhancing heat transfer efficiency. Using nanofluid can lead to improved heat transfer and reduced friction factor.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2022)

添加到收藏夹

Article Thermodynamics

Experimental investigation and application of stability and thermal characteristics of SiO2-ethylene-glycol/water nanofluids

Jingtao Dong et al.

Summary: A SiO2-ethylene-glycol/deionized water nanofluids with excellent static storage and dynamic stability was prepared and its thermophysical properties, heat transfer efficiency, and corrosion resistance were studied. The experimental results show that this nanofluids have a stable storage period and good heat transfer performance.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

添加到收藏夹

Article Thermodynamics

Thermal improvement of linear Fresnel solar system utilizing Al2O3-water nanofluid and multi-way twisted tape

M. Sheikholeslami et al.

Summary: In this study, the thermal treatment of Linear Fresnel Reflector (LFR) unit was enhanced by the application of multi-way twisted tape (MWTT). Finite volume simulations were used to predict the flow and thermal performance, and SolTrace and ANSYS FLUET were used to extract the distribution of absorb flux. The results showed that the rotation, width, and number of wings of the twisted tape significantly affected the fluid flow and thermal efficiency.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

添加到收藏夹

Article Engineering, Chemical

Thermal-hydraulic performance of a nanofluid in a shell-and-tube heat exchanger equipped with new trapezoidal inclined baffles: Nanoparticle shape effect

Mehdi Bahiraei et al.

Summary: The study analyzed the influences of diverse shapes of nanoparticles on the thermal-hydraulic efficacy of a nanofluid containing boehmite nanoparticles in a shell and tube heat exchanger. Different particle shapes had varying effects on the heat transfer performance, with the nanofluid with platelet particles demonstrating the highest overall heat transfer coefficient. Additionally, the nanofluid with Os nanoparticles exhibited the greatest effectiveness compared to other nanoparticle suspensions with different shapes.

POWDER TECHNOLOGY (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Hydrothermal analysis for a parabolic solar unit with wavy absorber pipe and nanofluid

M. Sheikholeslami et al.

Summary: This article presents a numerical simulation for the thermal analysis of a parabolic trough collector (PTC) with a wavy absorber tube using the finite volume method. The study investigates the performance of a new wavy absorber tube in a solar system with a parabolic reflector. The results show that increasing the Reynolds number (Re) and the volume concentration can improve the heat transfer efficiency.

RENEWABLE ENERGY (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

A critical analysis on the energy and exergy performance of photovoltaic/ thermal (PV/T) system: The role of nanofluids stability and synthesizing method

Alireza Yazdani et al.

Summary: The main aim of this paper is to explore the effects of different nanofluid preparation methods on the performance of photovoltaic/thermal (PV/T) systems. The study found that nanofluid prepared using the one-step method had higher stability and improved energy performance compared to the two-step method. Increasing the concentration of nanofluid linearly increased system efficiencies, with the highest enhancement rate observed from 1% to 3% for two-step prepared nanofluid. It was also observed that system performance was higher in the turbulent-flow regime for two-step prepared nanofluid compared to the laminar-flow regime, which was attributed to the stability of the nanofluid.

SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS (2022)

添加到收藏夹

Article Thermodynamics

Sensitivity analysis of entropy production in Al2O3/H2O nanofluid through converging pipe

Olatomide G. Fadodun et al.

Summary: The work investigated the entropy production rate in Al2O3/H2O nanofluid flowing through a convergent pipe in laminar flow regime using computational fluid dynamic and response surface methodology. The increase in Reynolds number and converging angle decreases the entropy production rate, with convergence angle being the most sensitive parameter among the three.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

添加到收藏夹

Article Thermodynamics

Non-Uniform Magnetic Field Effect on Forced Convection Heat Transfer of Flattened Tubes Using Two-Phase Mixture Model

Elnaz Yousefi et al.

Summary: Numerical investigation of the effect of non-uniform magnetic field on forced convection heat transfer of ferrofluids in flattened tubes showed that positioning wires at different locations can enhance heat transfer while increasing pressure drop.

HEAT TRANSFER ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Numerical investigation of entropy production in SWCNT/H2O nanofluid flowing through inwardly corrugated tube in turbulent flow regime

Olatomide G. Fadodun et al.

Summary: This study numerically investigates the entropy production rate in single-walled carbon nanotubes (SWCNTs)/H2O nanofluid flowing through an inwardly corrugated pipe in turbulent flow regime. The results show that an increase in SWCNT-water nanofluid concentration and corrugation amplitude leads to a decrease in thermal entropy production but an increase in viscous entropy production.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

添加到收藏夹

Article Thermodynamics

Effect of volume fraction and size of Al2O3 nanoparticles in thermal, frictional and economic performance of circumferential corrugated helical tube

Haoran Wei et al.

Summary: The study focused on the effects of Al2O3 nano-particles in coiled heat exchanger tubes, revealing that volume fraction significantly impacts Nusselt number, while particle size has less influence on performance. The combined use of corrugation and nano-particles can enhance performance index and expand the economically beneficial range of the system.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Engineering, Chemical

Thermohydraulic performance and effectiveness of a mini shell and tube heat exchanger working with a nanofluid regarding effects of fins and nanoparticle shape

Mehdi Bahiraei et al.

Summary: The study investigates the influence of varied nanoparticle shapes, Reynolds numbers, and inlet temperatures on the thermal-hydraulic efficacy of a boehmite nanofluid in a mini shell and tube heat exchanger. Results show that increasing Reynolds number leads to higher heat transfer rate, overall heat transfer coefficient, and effectiveness, while the performance index decreases.

ADVANCED POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Chemical

A comprehensive analysis for second law attributes of spiral heat exchanger operating with nanofluid using two-phase mixture model: Exergy destruction minimization attitude

Mehdi Bahiraei et al.

Summary: The study focuses on the second law attributes of a counter-flow spiral heat exchanger with an Al2O3-H2O nanofluid, showing that dispersing more nanoparticles can reduce total entropy generation while increasing thermal entropy generation. Overall exergy destruction in the heat exchanger decreases significantly with increasing volume fraction, but tends to increase with flow rate increment. The second law efficiency of the heat exchanger is consistently high, with a minimum value greater than 0.84 and increasing with higher volume fraction or flow rate.

ADVANCED POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Thermodynamics

Turbulent heat transfer and flow analysis of hybrid Al2O3-CuO/water nanofluid: An experiment and CFD simulation study

Shaojie Zhang et al.

Summary: The study investigates the heat transfer performance of a hybrid nanofluid in a circular tube, finding a relative enhancement in heat transfer efficiency and pressure drop at different flow rates. Different thermophysical property models lead to variations in Nusselt and Reynolds numbers, affecting the overall performance of the nanofluid. The numerical simulations demonstrate deviations among different models, with some showing more accurate predictions for experimental heat transfer coefficient than others.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermal entropy and exergy efficiency analyses of nanodiamond/water nanofluid flow in a plate heat exchanger

L. Syam Sundar et al.

Summary: The study aimed to analyze the heat transfer coefficient and thermal entropy generation of plate heat exchanger using water-based nanodiamond nanofluids. The experiments investigated the impact of Reynolds number, Peclet number, and particle volume loadings on heat transfer and entropy generation. Results showed significant improvements in heat transfer coefficient and Nusselt number with increased nanofluid particle loadings, with enhancements ranging from 32.50% to 55.47% compared to base fluid at specific conditions.

DIAMOND AND RELATED MATERIALS (2021)

添加到收藏夹

Article Thermodynamics

Thermal performance, embodied energy and environmental CO2 emissions analyses for double pipe U-bend heat exchanger working with MWCNT/water nanofluid

B. Saleh et al.

Summary: Experimental evaluation of MWCNT/water nanofluid flow in a double pipe U-bend heat exchanger shows significantly enhanced thermal performance and efficiency, leading to reduced cost and CO2 emissions.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Performance analysis and particle swarm optimization of molten saltbased nanofluids in parabolic trough concentrators

Amr Kaood et al.

Summary: This study investigated and optimized the performance of parabolic trough concentrators (PTCs) using molten salt-based nanofluids (MSNEs) as heat transfer media at high temperatures. The research utilized complex frameworks and techniques to analyze and improve thermal, hydraulic, energetic, and exergetic performances, leading to the discovery of optimal conditions for energy and exergy efficiency combinations.

RENEWABLE ENERGY (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Second law efficiency analysis of air injection into inner tube of double tube heat exchanger

Nazaruddin Sinaga et al.

Summary: The experimental study focused on the thermal performance of a double tube heat exchanger with air/water two-phase flow. After analyzing several parameters, the heat transfer coefficient and Number of Transfer Units showed significant increases.

ALEXANDRIA ENGINEERING JOURNAL (2021)

添加到收藏夹

Review Green & Sustainable Science & Technology

An overview of sustainability of heat exchangers and solar thermal applications with nanofluids: A review

Mariana S. Bretado-de los Rios et al.

Summary: Nanofluids have been studied as an innovative alternative fluid solution to enhance the efficiency and profitability of thermal systems, with potential benefits including reduced environmental impact and energy consumption. Evaluating nanofluids based on sustainability methodologies is important for determining their economic and environmental advantages in thermal systems. Despite facing challenges, stable nanofluids with optimal nanoparticle selection and concentration can bring positive results in thermal systems.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

添加到收藏夹

Article Thermodynamics

Computational analysis of hybrid nanofluid enhanced heat transfer in cross flow micro heat exchanger with rectangular wavy channels

Kaouther Ghachem et al.

Summary: The study of hybrid nanofluid enhanced heat transfer in a cross flow micro heat exchanger with rectangular wavy channels reveals that choosing the appropriate flow velocity and nanoparticles volume fraction can reduce the size of the heat exchanger, with the addition of nanoparticles having a significant impact only at high velocities. A trade-off between the relevant controlling parameters is necessary to ensure optimal efficiency.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Energy & Fuels

Energy, exergy, and hydrodynamic performance of a spiral heat exchanger: Process intensification by a nanofluid containing different particle shapes

Nima Mazaheri et al.

Summary: The study investigated the energy, exergy, and hydrodynamic characteristics of using boehmite alumina nanofluid in a spiral heat exchanger with five different nanoparticle shapes. It was found that higher volume fractions of nanofluid enhanced heat exchange amount, overall heat transfer coefficient (U), and effectiveness. Different nanoparticle shapes had varying effects on thermal efficiency and energy efficiency, with platelet-shaped nanoparticles performing best at constant Re and oblate spheroid-shaped nanoparticles being recommended for energy efficiency perspective.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2021)

添加到收藏夹

Article Energy & Fuels

Experimental and computational study of using nanofluid for thermal management of electronic chips

M. M. El-Khouly et al.

Summary: This study experimentally and numerically investigated the impact of using nanofluids for cooling a chip, showing an enhancement in thermal conductance compared to water. The optimal thermal-hydraulic performance was found with nanofluid at a nanoparticle volume fraction of 5% CuO, reaching a higher value of 1.47.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Thermo-hydraulic performance of nanofluids flow in various internally corrugated tubes

Amr Kaood et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2020)

添加到收藏夹

Article Mathematics, Applied

Nanofluid flow through microchannel with a triangular corrugated wall: Heat transfer enhancement against entropy generation intensification

Quyen Nguyen et al.

MATHEMATICAL METHODS IN THE APPLIED SCIENCES (2020)

添加到收藏夹

Article Engineering, Chemical

Heat transport in nanofluid coolant car radiator with louvered fins

Ashutosh Kumar et al.

POWDER TECHNOLOGY (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

An intuitive framework for optimizing energetic and exergetic performances of parabolic trough solar collectors operating with nanofluids

Mohamed Abubakr et al.

RENEWABLE ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

A soft computing approach for estimating the specific heat capacity of molten salt-based nanofluids

Muhammed A. Hassan et al.

JOURNAL OF MOLECULAR LIQUIDS (2019)

添加到收藏夹

Article Thermodynamics

Turbulent convective heat transfer of silica oxide nanofluid through corrugated channels: An experimental and numerical study

Raheem K. Ajeel et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Thermal performance improvement in water nanofluid/GNP-SDBS in novel design of double-layer microchannel heat sink with sinusoidal cavities and rectangular ribs

Erfan Khodabandeh et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

添加到收藏夹

Review Physics, Multidisciplinary

Recent advances in modeling and simulation of nanofluid flows-Part I: Fundamentals and theory

Omid Mahian et al.

PHYSICS REPORTS-REVIEW SECTION OF PHYSICS LETTERS (2019)

添加到收藏夹

Article Thermodynamics

Numerical investigation of heat transfer and friction characteristics for turbulent flow in various corrugated tubes

A. Kaood et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY (2019)

添加到收藏夹

Article Engineering, Chemical

Convection of heat and thermodynamic irreversibilities in two-phase, turbulent nanofluid flows in solar heaters by corrugated absorber plates

M. Akbarzadeh et al.

ADVANCED POWDER TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Chemical

Numerical investigation on flow and heat transfer characteristics of corrugated tubes with non-uniform corrugation in turbulent flow

Dongwei Zhang et al.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2018)

添加到收藏夹

Article Thermodynamics

Numerical investigation of entropy generation of turbulent flow in a novel outward corrugated tube

Wei Wang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Article Thermodynamics

Entropy generation analysis of fully-developed turbulent heat transfer flow in inward helically corrugated tubes

Wei Wang et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Thermal performance of a parabolic trough linear collector using Al2O3/H2O nanofluids

Mariana Soledad Bretado de los Rios et al.

RENEWABLE ENERGY (2018)

添加到收藏夹

Article Chemistry, Physical

Heat transfer and entropy generation of the nanofluid flow inside sinusoidal wavy channels

Reza Dormohammadi et al.

JOURNAL OF MOLECULAR LIQUIDS (2018)

添加到收藏夹

Article Physics, Multidisciplinary

Entropy Generation Analysis and Performance Evaluation of Turbulent Forced Convective Heat Transfer to Nanofluids

Yu Ji et al.

ENTROPY (2017)

添加到收藏夹

Article Thermodynamics

Heat transfer augmentation through convergence angles in a pipe

Ahmed T. Al-Sammarraie et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2017)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Optimal selection of annulus radius ratio to enhance heat transfer with minimum entropy generation in developing laminar forced convection of water-Al2O3 nanofluid flow

Siavashi Majid et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2017)

添加到收藏夹

Article Thermodynamics

Influences of corrugation profiles on entropy generation, heat transfer, pressure drop, and performance in a wavy channel

M. Akbarzadeh et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Entropy generation during fluid flow in sharp edge wavy channels with horizontal pitch

Haitham M. S. Bahaidarah

ADVANCES IN MECHANICAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Numerical and experimental investigations on the heat transfer enhancement in corrugated channels using SiO2-water nanofluid

M. A. Ahmed et al.

CASE STUDIES IN THERMAL ENGINEERING (2015)

添加到收藏夹

Proceedings Paper Thermodynamics

Effect of Corrugated Characteristics on the Liquid Nitrogen Temperature Field of HTS Cable

Z. M. Li et al.

ADVANCES IN CRYOGENIC ENGINEERING (2014)

添加到收藏夹

Article Thermodynamics

Entropy Generation for Nonisothermal Fluid Flow: Variable Thermal Conductivity and Viscosity Case

Coskun Ozalp

ADVANCES IN MECHANICAL ENGINEERING (2013)

添加到收藏夹

Article Thermodynamics

Experimental investigation of forced convection heat transfer and friction factor in a tube with Fe3O4 magnetic nanofluid

L. Syam Sundar et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Two-phase mixture model simulation of the hydro-thermal behavior of an electrical conductive ferrofluid in the presence of magnetic fields

H. Aminfar et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2012)

添加到收藏夹

Article Engineering, Chemical

New simple correlation formula for the drag coefficient of non-spherical particles

Andreas Hoelzer et al.

POWDER TECHNOLOGY (2008)

添加到收藏夹

Article Thermodynamics

Local entropy production in turbulent shear flows: a high-Reynolds number model with wall functions

F Kock et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2004)

添加到收藏夹

Article Thermodynamics

Entropy generation minimization of fully developed internal flow with constant heat flux

EB Ratts et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.