☆ 4.7 Article

Solution to problems caused by associated non-quadratic yield functions with respect to the ductile fracture

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Mechanics

Simulation of ductile tearing during a full size test using a non local Gurson-Tvergaard-Needleman (GTN) model

Youbin Chen et al.

Summary: This study experimentally investigates the ductile tearing behavior of a full size precracked pipe. The pipe material is characterized using smooth and notched tensile bars and precracked C(T) specimens, and a non-local GTN model is used in finite element simulations to successfully represent the early stages of crack propagation in the pipe.

ENGINEERING FRACTURE MECHANICS (2022)

添加到收藏夹

Article Engineering, Mechanical

Effect of incorporating Lode angle parameter into a fracture criterion in predicting ballistic impact behavior of double-layered 2024-T351 aluminum alloy plates against blunt projectiles

Xinke Xiao et al.

Summary: This study investigates the ballistic impact behavior of double-layered aluminum alloy plates and compares the predictions of two fracture criteria, one independent of Lode angle and one dependent on Lode angle. Experimental results show that using double-layered plates increases the ballistic resistance by 30%. Numerical simulations demonstrate that the Lode dependent fracture criterion predicts the ballistic limit velocities more accurately and captures the fracture patterns in more detail compared to the Lode independent criterion.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

User-friendly anisotropic hardening function with non-associated flow rule under the proportional loadings for BCC and FCC metals

Zhe Chen et al.

Summary: The paper introduces a user-friendly function under non-associate flow rule for capturing anisotropic hardening and yield loci curvature of BCC and FCC metals, showing accurate modeling under different loading directions. The model's flexibility and accuracy are confirmed by experimental and modeling results.

MECHANICS OF MATERIALS (2022)

添加到收藏夹

Article Mechanics

Ductile Fracture in Plane Stress

Mohammad Torki et al.

Summary: A micromechanics-based ductile fracture initiation theory has been developed and applied for high-throughput assessment of ductile failure in plane stress. The theory describes microscopic failure occurring in bands with inhomogeneous yielding, where the driving force is a combination of band-resolved normal and shear tractions. The new criterion is similar to the Mohr-Coulomb model but includes sensitivity to the third stress invariant, resulting in a finite shear ductility that cannot be explained by isotropic theory alone.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2022)

添加到收藏夹

Article Mathematics, Applied

A gradient-enhanced formulation for thermoviscoplastic metals accounting for ductile damage

Joao Paulo Pascon et al.

Summary: In this work, a gradient-enhancement formulation for ductile damage analysis in thermoviscoplastic metals is extended through a nonlocal extension of the thermoviscoplastic Gurson's model. The nonlocal formulation delays the damage evolution and reduces mesh sensitivity, leading to more consistent porosity contours. The choice of the nonlocal parameter is dependent on the strain rate employed.

FINITE ELEMENTS IN ANALYSIS AND DESIGN (2022)

添加到收藏夹

Review Physics, Multidisciplinary

Theoretical models of void nucleation and growth for ductile metals under dynamic loading: A review

Haonan Sui et al.

Summary: Understanding the mechanisms of void nucleation and growth under dynamic loading is crucial for damage analysis and design of damage-resistant materials. The development of experimental and simulation methods in the past few decades has provided abundant information for theoretical research in this field.

MATTER AND RADIATION AT EXTREMES (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Coupled elasto-viscoplastic and damage model accounting for plastic anisotropy and damage evolution dependent on loading conditions

R. Fincato et al.

Summary: This study introduces an unconventional fully coupled elasto-viscoplastic and damage constitutive model for investigating the failure mechanism of metallic materials. The model, developed within a finite elastoplasticity framework, demonstrates the ability to predict the failure behavior of materials effectively.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Using structural tensors for inelastic material modeling in the finite strain regime - A novel approach to anisotropic damage

S. Reese et al.

Summary: The paper introduces a new anisotropic damage model derived using the structural tensors approach, aimed at modeling materials in the finite strain regime, particularly ductile materials like metals. It also discusses the coupling of this damage model with finite elasto-plasticity and the formulation of evolution equations for plastic deformation, damage tensor, plastic and damage hardening.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2021)

添加到收藏夹

Article Engineering, Mechanical

New ductile fracture model for fracture prediction ranging from negative to high stress triaxiality

Zengli Peng et al.

Summary: In this study, a new uncoupled ductile fracture model is established in the stress space by considering key factors affecting the initiation of ductile fracture. The proposed model is validated through experimental tests and compared with four typical ductile fracture criteria, showing good stability and accuracy in predicting fracture strain, especially in high stress triaxiality range. The asymmetry of the fracture locus and the realistic stress space are also discussed at the end.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

添加到收藏夹

Article Mechanics

Experimental and numerical methodology to characterize 5083-aluminium behavior considering non-associated plasticity model coupled with isotropic ductile damage

Abir Bouhamed et al.

Summary: This study developed an elastoplastic-damage model fully coupled with the constitutive equations of non-associated plasticity, using two independent quadratic functions to describe the anisotropic behavior of 5083-aluminium alloy. The elastoplastic behavior of 5083-aluminium alloy was determined through uniaxial tensile tests, and experimental-numerical confrontation proved the reliability of the current formulation in describing the behavior of 5083-aluminium alloy with good accuracy. Additionally, a novel numerical optimization procedure was used to identify Lemaitre damage parameters, offering a compromise between accuracy and computational time.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2021)

添加到收藏夹

Article Engineering, Mechanical

Calibration of the modified Mohr-Coulomb fracture model by use of localization analyses for three tempers of an AA6016 aluminium alloy

Henrik Granum et al.

Summary: This paper presents a novel calibration procedure for the modified Mohr-Coulomb (MMC) fracture model using localization analyses on three tempers of an AA6016 aluminium alloy. The metal plasticity and porous plasticity models are calibrated using different methods, and localization analyses are shown to be a cost-effective and reliable tool for predicting ductile failure.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Mechanical

Effect of non-associated flow rule on fracture prediction of metal sheets using a novel anisotropic ductile fracture criterion

Hung Quach et al.

Summary: The ductile fracture behavior of anisotropic materials was studied using the uncoupled ductile fracture criterion for aluminum alloys 6016-AC200. The model considers void nucleation, growth, and evolution of void coalescence, with anisotropic yield function and non-associated flow rule applied for accuracy. Experimental tests and simulations confirmed the efficacy of the proposed fracture criterion for predicting onset of ductile fracture in sheet metal forming.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Civil

Experimental and numerical investigation on plasticity and fracture behaviors of aluminum alloy 6061-T6 extrusions

Peihua Zhu et al.

Summary: This study focuses on the plastic and fracture behaviors of aluminum alloy 6061-T6 extrusions under different stress states, proposing new plastic and ductile fracture models. Experimental observations and numerical simulations provide guidance for engineering design by recommending reduced values for shear strength and high-triaxiality tensile strength of AA 6061-T6 extrusions.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2021)

添加到收藏夹

Article Mechanics

Development of a ductile failure model sensitive to stress triaxiality and Lode angle

M. Ganjiani et al.

Summary: The anisotropic failure model proposed by Ganjiani has been extended and applied to predict failure phenomena in materials, showing good predictive performance. The simulations focused on the effects of loading on fracture onset, and comparative investigations with other failure criteria were provided. The model has significant potential to predict ductile failure and FFLD, especially for anisotropic materials, as indicated by the results.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2021)

添加到收藏夹

Article Mechanics

A thermodynamically nonlocal damage model using a surface-residual-based nonlocal stress

Liyang Huang et al.

Summary: In this research, a surface-residual-based nonlocal stress was introduced into nonlocal damage theory to describe long-range actions among microstructures. A thermodynamically consistent nonlocal integral damage model was established to simulate strain localization behavior for elastic-brittle damage problems. The characteristic length was found to be comparable to the size of the strain localization zone based on simulations of different internal characteristic lengths for strain localization behaviors.

JOURNAL OF MECHANICS (2021)

添加到收藏夹

Article Engineering, Mechanical

Anisotropic plasticity characterization of 6000-and 7000-series aluminum sheet alloys at various strain rates

Taamjeed Rahmaan et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)

添加到收藏夹

Article Engineering, Mechanical

A non-associated constitutive model considering anisotropic hardening for orthotropic anisotropic materials in sheet metal forming

Boxun Wu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

添加到收藏夹

Article Engineering, Manufacturing

Damage and fracture during sheet-metal forming of alloy 718

Lluis Perez Caro et al.

INTERNATIONAL JOURNAL OF MATERIAL FORMING (2020)

添加到收藏夹

Article Mechanics

A damage model for predicting ductile fracture with considering the dependency on stress triaxiality and Lode angle

M. Ganjiani

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2020)

添加到收藏夹

Article Engineering, Mechanical

Effect of Lode angle incorporation into a fracture criterion in predicting the ballistic resistance of 2024-T351 aluminum alloy plates struck by cylindrical projectiles with different nose shapes

Yaopei Wang et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)

添加到收藏夹

Article Engineering, Mechanical

Strength modeling of sheet metals from shear to plane strain tension

Yanshan Lou et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

添加到收藏夹

Article Engineering, Mechanical

A coupled yield criterion for anisotropic hardening with analytical description under associated flow rule: Modeling and validation

Qi Hu et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

添加到收藏夹

Article Engineering, Mechanical

Prediction of ductile fracture on 6016-T4 aluminum alloy sheet metal forming considering anisotropic plasticity

Saijun Zhang et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dynamic perforation of lightweight armor: Temperature-dependent plasticity and fracture of aluminum 7020-T6

Christian C. Roth et al.

MECHANICS OF MATERIALS (2020)

添加到收藏夹

Article Engineering, Mechanical

A non-quadratic pressure-sensitive constitutive model under non-associated flow rule with anisotropic hardening: Modeling and validation

Yong Hou et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

添加到收藏夹

Article Mechanics

On mechanical response of Zircaloy-4 under a wider range of stress states: From uniaxial tension to uniaxial compression

Marcelo Paredes et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental characterization and constitutive modeling of an aluminum 7085-T711 alloy under large deformations at varying strain rates, stress states, and temperatures

L. A. Peterson et al.

MECHANICS OF MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

A study on the plasticity and fracture of the AISI 4340 steel alloy under different loading conditions and considering heat-treatment effects

Sami Ghazali et al.

INTERNATIONAL JOURNAL OF FRACTURE (2020)

添加到收藏夹

Article Mechanics

Numerical modeling of the evolution of ductile damage under proportional and non-proportional loading

R. Fincato et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2019)

添加到收藏夹

Article Engineering, Mechanical

A criterion for general description of anisotropic hardening considering strength differential effect with non-associated flow rule

Namsu Park et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

添加到收藏夹

Article Engineering, Mechanical

Effect of Lode angle in predicting the ballistic resistance of Weldox 700 E steel plates struck by blunt projectiles

Xiao Xinke et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)

添加到收藏夹

Article Engineering, Mechanical

Study on non-associated plasticity with various forward Euler stress integration algorithms and its prediction of earing in cylindrical cup drawing

Bingtao Tang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

添加到收藏夹

Article Engineering, Mechanical

Phenomenological uncoupled ductile fracture model considering different void deformation modes for sheet metal forming

Lei Mu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

添加到收藏夹

Article Mechanics

New yield criteria for isotropic and textured metallic materials

Oana Cazacu

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)

添加到收藏夹

Article Engineering, Industrial

Metal plasticity and ductile fracture modeling for cast aluminum alloy parts

Jinwoo Lee et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Prediction of fracture and deep drawing behavior of solution treated Inconel-718 sheets: Numerical modeling and experimental validation

K. S. Prasad et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Notched specimen under compression for ductile failure criteria

Petr Kubik et al.

MECHANICS OF MATERIALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Lode dependent plasticity coupled with nonlinear damage accumulation for ductile fracture of aluminium alloy

Frantisek Sebek et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Mechanics

Fracture behaviour of Alloy 718 at high strain rates, elevated temperatures, and various stress triaxialities

Ted Sjoberg et al.

ENGINEERING FRACTURE MECHANICS (2017)

添加到收藏夹

Article Engineering, Mechanical

A yield criterion through coupling of quadratic and non quadratic functions for anisotropic hardening with non associated flow rule

Eun-Ho Lee et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2017)

添加到收藏夹

Article Mechanics

A correct form of Bai-Wierzbicki plasticity model and its extension for strain rate and temperature dependence

Vladislav V. Vershinin

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Evaluation of stress integration algorithms for elastic-plastic constitutive models based on associated and non-associated flow rules

Mohsen Safaei et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2015)

添加到收藏夹

Article Mechanics

A study of Inconel 718 dependency on stress triaxiality and Lode angle in plastic deformation and ductile fracture

Mohammed Algarni et al.

ENGINEERING FRACTURE MECHANICS (2015)

添加到收藏夹

Article Mechanics

Ductile fracture of aluminum 2024-T351 under proportional and non-proportional multi-axial loading: Bao-Wierzbicki results revisited

Jessica Papasidero et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

An evolutionary anisotropic model for sheet metals based on non-associated flow rule approach

Mohsen Safaei et al.

COMPUTATIONAL MATERIALS SCIENCE (2014)

添加到收藏夹

Article Engineering, Mechanical

Modeling of shear ductile fracture considering a changeable cut-off value for stress triaxiality

Yanshan Lou et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2014)

添加到收藏夹

Article Mechanics

A coupled elastoplastic-damage constitutive model with Lode angle dependent failure criterion

Borja Erice et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2014)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

Numerical implementation of a J2- and J3-dependent plasticity model based on a spectral decomposition of the stress deviator

Martin Kroon et al.

COMPUTATIONAL MECHANICS (2013)

添加到收藏夹

Article Engineering, Mechanical

A new approach for ductile fracture prediction on Al 2024-T351 alloy

Akhtar S. Khan et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2012)

添加到收藏夹

Article Mechanics

APPLICATION OF THE PLASTICITY MODELS THAT INVOLVE THREE STRESS INVARIANTS

Tingting Zhang et al.

INTERNATIONAL JOURNAL OF APPLIED MECHANICS (2012)

添加到收藏夹

Article Engineering, Mechanical

On stress-state dependent plasticity modeling: Significance of the hydrostatic stress, the third invariant of stress deviator and the non-associated flow rule

Xiaosheng Gao et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2011)

添加到收藏夹

Article Engineering, Multidisciplinary

Improved explicit integration in plasticity

Marko Vrh et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2010)

添加到收藏夹

Article Engineering, Mechanical

Evaluation of associated and non-associated quadratic plasticity models for advanced high strength steel sheets under multi-axial loading

Dirk Mohr et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2010)

添加到收藏夹

Article Mechanics

Stress based fracture envelope for damage plastic solids

Liang Xue

ENGINEERING FRACTURE MECHANICS (2009)

添加到收藏夹

Article Engineering, Mechanical

Anisotropic hardening and non-associated flow in proportional loading of sheet metals

Thomas B. Stoughton et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2009)

添加到收藏夹

Article Engineering, Geological

Basic characteristics and development of yield criteria for geomaterials

Maohong Yu et al.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2009)

添加到收藏夹

Article Mechanics

Modification of the Gurson Model for shear failure

K. Nahshon et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2008)

添加到收藏夹

Article Engineering, Mechanical

A new model of metal plasticity and fracture with pressure and Lode dependence

Yuanli Bai et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2008)

添加到收藏夹

Article Engineering, Mechanical

A finite element formulation based on non-associated plasticity for sheet metal forming

Vedrana Cvitanic et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2008)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

An efficient return algorithm for non-associated plasticity with linear yield criteria in principal stress space

Johan Clausen et al.

COMPUTERS & STRUCTURES (2007)

添加到收藏夹

Article Mechanics

A consistent plasticity theory of incompressible and hydrostatic pressure sensitive metals

Holger Aretz

MECHANICS RESEARCH COMMUNICATIONS (2007)

添加到收藏夹

Review Engineering, Mechanical

Review of Drucker's postulate and the issue of plastic stability in metal forming

TB Stoughton et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2006)

添加到收藏夹

Article Engineering, Mechanical

Orthotropic yield criterion for hexagonal closed packed metals

O Cazacu et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2006)

添加到收藏夹

Article Engineering, Mechanical

Linear transfomation-based anisotropic yield functions

F Barlat et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2005)

添加到收藏夹

Article Engineering, Mechanical

A yield function for anisotropic materials - Application to aluminum alloys

F Bron et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2004)

添加到收藏夹

Article Engineering, Mechanical

Plane stress yield function for aluminum alloy sheets - part 1: theory

F Barlat et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2003)

添加到收藏夹

Article Engineering, Mechanical

A non-associated flow rule for sheet metal forming

TB Stoughton

INTERNATIONAL JOURNAL OF PLASTICITY (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.