4.6 Article

Utilization of wavy porous layer, magnetic field and hybrid nanofluid with slot jet impingement on the cooling performance of conductive panel

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Thermodynamics

Comparative study and hybrid modeling approach with POD for convective drying performance of porous moist object with multi-impinging jet and channel flow configurations

Fatih Selimefendigil et al.

Summary: Comparative studies were performed to analyze the convective drying performance of a porous moist object in channel flow and with multiimpinging jet flow configuration. The results showed that the moisture reduction (MR) was higher for the jet flow arrangement and higher Reynolds number. The hot inlet temperature and object size also affected the drying performance, while the vertical distance between the inlet jets had more impact than the horizontal distance.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

Article Energy & Fuels

Numerical Investigation of Nanoparticles Shape Impacts on Thermal Energy Transfer and Flow Features of Nanofluid Impingement Jets

Behrang Asghari Shirvani et al.

Summary: This study numerically investigated the characteristics of nanofluid impingement jet and found that increasing Reynolds number and volume fraction of nanoparticles improve thermal energy transfer rate. Different shapes of nanoparticles affect thermophysical properties of the flow, with platelet and cylindrical nanoparticles showing the highest energy transfer efficiency.

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2021)

Article Metallurgy & Metallurgical Engineering

Combined effects of local curvature and elasticity of an isothermal wall for jet impingement cooling under magnetic field effects

Fatih Selimefendigil et al.

Summary: The study aimed to investigate the effects of local curvature and elastic wall effects of an isothermal hot wall on jet impingement cooling performance. Various parameters such as Re number, Ha number, elasticity, surface curvature, and nanoparticle volume fraction were numerically studied. The results showed that Nu number increased with higher Hartmann number, elastic modulus of the wall, and nanoparticle volume fraction. Curvature effects became significant at higher Re numbers, while the elastic wall effects on heat transfer were reduced with increased bottom wall curvature.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2021)

Article Computer Science, Interdisciplinary Applications

Investigation of nanoparticles Cu, Ag and Fe3O4 on thermophoresis and viscous dissipation of MHD nanofluid over a stretching sheet in a porous regime: A numerical modeling

Silpi Hazarika et al.

Summary: This article investigates the hydromagnetic flow of three different nanoparticles in a water based nanofluid, focusing on the effects of heat generation and Soret number. The study shows that increasing nanoparticle volume fraction decreases liquid velocity but has no impact on liquid temperature, and different nanoparticles exhibit varying performance in terms of velocity and temperature.

MATHEMATICS AND COMPUTERS IN SIMULATION (2021)

Article Thermodynamics

Thermal and entropy analyses on buoyancy-driven flow of nanofluid inside a porous enclosure with two square cylinders: Finite element method

A. Sattar Dogonchi et al.

Summary: This article investigates the heat transfer, entropy generation, and fluid flow behavior inside a porous enclosure using a numerical method called FEM for a square cylinder filled with magnetic nanoliquid. The study found that entropy generation increases with rising Hartmann number and Rayleigh number, leading to velocity gradient overshooting within the enclosure. Results show different heat transfer and fluid flow characteristics for varying parameters combinations.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Article Green & Sustainable Science & Technology

Jet Impingement Heat Transfer of Confined Single and Double Jets with Non-Newtonian Power Law Nanofluid under the Inclined Magnetic Field Effects for a Partly Curved Heated Wall

Fatih Selimefendigil et al.

Summary: The study shows that the increase in average Nu number with Reynolds number depends on the power law index. The magnetic field strength and inclination can influence the size and number of vortices in the magnetic field. The aspect ratio of the curved wall has a slight impact on the flow field, while higher solid particle volume fraction and smaller particle size can increase the average Nu number.

SUSTAINABILITY (2021)

Review Chemistry, Physical

Recent advances in using nanofluids in renewable energy systems and the environmental implications of their uptake

Omid Mahian et al.

Summary: Nanofluids, mixtures of common liquids and solid nanoparticles with enhanced thermal and optical properties, have been studied for over two decades despite barriers to commercial adoption. Research has focused on the effects of adding nanoparticles on the thermal efficiency and emission reductions in renewable energy systems, particularly in solar systems.

NANO ENERGY (2021)

Article Thermodynamics

MHD enhanced nanofluid mediated heat transfer in porous metal for CPU cooling

Aliakbar Izadi et al.

APPLIED THERMAL ENGINEERING (2020)

Article Thermodynamics

Investigation of nanoparticles shape effects on MHD nanofluid flow and heat transfer over a rotating stretching disk through porous medium

Umair Rashid et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2020)

Review Chemistry, Physical

Investigation of nanoparticle effects on jet impingement heat transfer: A review

Javad Mohammadpour et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Review Mechanics

A review of the state-of-the-art nanofluid spray and jet impingement cooling

Praveen Kumar Tyagi et al.

PHYSICS OF FLUIDS (2020)

Article Thermodynamics

Simulation and experimental analysis of heat transfer characteristics in the plate type heat exchangers using TiO2/water nanofluid

Ataollah Khanlari et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2019)

Article Thermodynamics

MHD convective heat transfer of Ag-MgO/water hybrid nanofluid in a channel with active heaters and coolers

Yuan Ma et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Article Thermodynamics

Free convection heat transfer of MgO-MWCNTs/EG hybrid nanofluid in a porous complex shaped cavity with MHD and thermal radiation effects

Mohammad Ghalambaz et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2019)

Article Thermodynamics

Effect of magnetic field and nanoparticle shape on jet impingement over stationary and vibrating plates

Rajesh Nimmagadda et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2019)

Article Thermodynamics

Numerical study of unsteady flow and heat transfer CNT-based MHD nanofluid with variable viscosity over a permeable shrinking surface

Zahid Ahmed et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2019)

Article Thermodynamics

Thermal Analysis of Multijet Impingement Through Porous Media to Design a Confined Heat Management System

Carlos Zing et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2019)

Article Materials Science, Multidisciplinary

Effect of uniform/non-uniform magnetic field and jet impingement on the hydrodynamic and heat transfer performance of nanofluids

Rajesh Nimmagadda et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2019)

Article Thermodynamics

MHD flow and heat transfer over a permeable stretching/shrinking sheet in a hybrid nanofluid with a convective boundary condition

Emad H. Aly et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2019)

Article Materials Science, Multidisciplinary

Unsteady MHD forced convection over a backward facing step including a rotating cylinder utilizing Fe3O4-water ferrofluid

Shafqat Hussain et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2019)

Review Thermodynamics

An updated review on application of nanofluids in heat exchangers for saving energy

Ahmad Hajatzadeh Pordanjani et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Article Engineering, Chemical

Nanofluid and porous fins effect on natural convection and entropy generation of flow inside a cavity

Majid Siavashi et al.

ADVANCED POWDER TECHNOLOGY (2018)

Review Green & Sustainable Science & Technology

Efficiency improvement of solar photovoltaic/solar air collectors by using impingement jets: A review

Rahul Nadda et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Article Thermodynamics

Unsteady MHD boundary layer flow of tangent hyperbolic two-phase nanofluid of moving stretched porous wedge

A. Mahdy et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2018)

Article Thermodynamics

Jet impingement cooling and optimization study for a partly curved isothermal surface with CuO-water nanofluid

Fatih Selimefendigil et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2017)

Article Thermodynamics

Magnetic field effect on the enhancement of nanofluids heat transfer of a confined jet impingement in mini-channel heat sink

Lersak Nakharintr et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Article Thermodynamics

Mesoscopic method for MHD nanofluid flow inside a porous cavity considering various shapes of nanoparticles

Mohsen Sheikholeslami et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Review Thermodynamics

Simulation of nanofluid heat transfer in presence of magnetic field: A review

Mohsen Sheikholeslami et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Article Materials Science, Multidisciplinary

MHD nanofluid free convection and entropy generation in porous enclosures with different conductivity ratios

Kasra Ghasemi et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2017)

Article Thermodynamics

Thermal and fluid dynamic behaviors of confined laminar impinging slot jets with nanofluids

Oronzio Manca et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2016)

Review Thermodynamics

A review on why researchers apply external magnetic field on nanofluids

Beriache M'hamed et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2016)

Review Green & Sustainable Science & Technology

Uniform cooling of photovoltaic panels: A review

Haitham M. S. Bahaidarah et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Article Energy & Fuels

Hydrodynamic optimization of the UGEN: Wave energy converter with U-shaped interior oscillating water column

S. Ribeiro e Silva et al.

INTERNATIONAL JOURNAL OF MARINE ENERGY (2016)

Article Engineering, Multidisciplinary

Finite element simulation of magnetohydrodynamic convective nanofluid slip flow in porous media with nonlinear radiation

M. J. Uddin et al.

ALEXANDRIA ENGINEERING JOURNAL (2016)

Review Nanoscience & Nanotechnology

MHD Convection of Nanofluids: A Review

Ali J. Chamkha et al.

JOURNAL OF NANOFLUIDS (2015)

Article Thermodynamics

Experimental investigation of submerged single jet impingement using Cu-water nanofluid

Qiang Li et al.

APPLIED THERMAL ENGINEERING (2012)

Article Thermodynamics

Magnetic field effect on natural convection in a nanofluid-filled square enclosure

B. Ghasemi et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2011)

Article Thermodynamics

A visualization study of the flow dynamics of a single round jet impinging on porous media

Ravi Yakkatelli et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2010)

Review Nanoscience & Nanotechnology

Enhanced thermal conductivity of nanofluids: a state-of-the-art review

Sezer Ozerinc et al.

MICROFLUIDICS AND NANOFLUIDICS (2010)

Article Thermodynamics

An experimental study of a confined and submerged impinging jet heat transfer using Al2O3-water nanofluid

Cong Tam Nguyen et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2009)

Article Thermodynamics

MHD flow and heat transfer in a backward-facing step

H. Abbassi et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2007)