4.7 Article

A non-smooth quasi-zero-stiffness isolator with displacement constraints

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Mathematics, Applied

Nonlinear dynamics of new magneto-mechanical oscillator

Zhifeng Hao et al.

Summary: This study introduces a new magneto-mechanical oscillator that focuses on the effects of mechanical and magnetic nonlinearities for large amplitude responses. The design includes a novel electromagnetic actuator and excitation patterns, demonstrating its versatility and potential applications.

COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION (2022)

Article Engineering, Mechanical

Vibration energy flow transmission in systems with Coulomb friction

Wei Dai et al.

Summary: The study reveals that dry friction in dynamic systems can suppress vibration response and dissipate vibrational energy at both low and high frequencies. Frictional contact at interfaces can increase force transmissibility and energy transfer, especially at high excitation frequencies.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Article Engineering, Mechanical

An origami inspired quasi-zero stiffness vibration isolator using a novel truss-spring based stack Miura-ori structure

Kan Ye et al.

Summary: In this study, an origami-inspired vibration isolator with quasi-zero-stiffness (QZS) property is proposed using a truss-spring based stack Miura-ori (TS-SMO) structure. The unique structure uses coil spring sets to replace deformable creases, improving physical realization in engineering applications. Nonlinear force response and QZS feature are achieved through geometric nonlinearity and specific Poisson's ratio profile, with isolation performance discussed under variable viscous damping effects.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Article Engineering, Mechanical

Bio-inspired toe-like structure for low-frequency vibration isolation

Ge Yan et al.

Summary: A novel bio-inspired toe-like structure is developed for low-frequency vibration isolation, possessing favorable high static and low dynamic stiffness characteristics. It effectively isolates low frequency vibration loads and provides a feasible approach to passive vibration control in the low frequency band.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Article Engineering, Mechanical

On the detailed design of a quasi-zero stiffness device to assist in the realisation of a translational Lanchester damper

G. Gatti et al.

Summary: A translational Lanchester damper adds damping to a structure using a combination of viscous damper and mass, but achieving low stiffness for the device is crucial to behave like a Lanchester damper rather than a dynamic vibration absorber. By utilizing a specific geometry with linear springs and rigid links, the device is able to maintain linear-like behavior despite its inherent nonlinearity. The study on how geometry affects the nonlinear behavior provides general guidelines for design, and a prototype incorporating the low stiffness element has been successfully tested on vibrating structures.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Article Engineering, Mechanical

A quasi-zero-stiffness vibration isolator using a cam mechanism with user-defined profile

Ming Li et al.

Summary: This paper introduces a passive quasi-zero-stiffness vibration isolator using a cam mechanism, which can generate ideal simplest restoring force directly and eliminate approximation errors. Experimental results confirm the proposed design principle and show the advantages of the QZS isolator in vibration tests, with wider isolation frequency bandwidth and weaker resonance effect compared to linear counterparts. The specific isolation efficiency and the effect of excitation amplitudes on vibration attenuation performance are comprehensively compared.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Article Mechanics

Performance analysis of a quasi-zero stiffness vibration isolation system with scissor-like structures

Wei Zou et al.

Summary: A novel vibration isolation system with quasi-zero stiffness and nonlinear damping using geometric nonlinearity and scissor-like structures is proposed. This system can isolate low-frequency vibration, suppress high-amplitude vibration, and has minimal impact from increasing nonlinear damping at high frequencies. The theoretical results show that this system outperforms classical counterparts.

ARCHIVE OF APPLIED MECHANICS (2021)

Article Acoustics

Post-grazing dynamics of a vibro-impacting energy generator

Larissa Serdukova et al.

Summary: The motion of a forced vibro-impacting incline energy harvester is investigated in parameter regimes with asymmetry in the number of impacts on the bottom and top. Semi-analytical expressions for asymmetric periodic motion with a ratio of 2:1 for impacts on the device bottom and top are obtained, derived through nonlinear maps and impact conditions. Bifurcation diagrams and linear stability analysis validate the numerical solutions for asymmetric motions with different incline angles.

JOURNAL OF SOUND AND VIBRATION (2021)

Article Engineering, Mechanical

Bursting oscillations in an isolation system with quasi-zero stiffness

Yuntian Zhang et al.

Summary: This paper investigates bursting oscillations in a vibration isolation system with quasi-zero stiffness to improve efficiency and reliability. The complex nonlinear dynamics are studied through bifurcation analysis, and an approximation method for force transmissibility is proposed. The results show that bursting is caused by transitions from equilibrium to limit cycle and equilibrium jumping, with the weakest bursting occurring when the system behaves in a single equilibrium state.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Review Engineering, Mechanical

Vibration control based metamaterials and origami structures: A state-of-the-art review

J. C. Ji et al.

Summary: Vibration and sound control are crucial for practical engineering systems, and metamaterials and origami-based structures offer promising applications due to their unique physical properties. Metamaterials exhibit extremal properties not found in conventional materials, with recent advances in auxetic, band gap, and pentamode metamaterials for vibration and sound mitigations. Origami, as an ancient Japanese art, has become a new design paradigm with its multi-stable states and desirable stiffness characteristics for vibration control.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Article Engineering, Mechanical

An innovative quasi-zero stiffness isolator with three pairs of oblique springs

Feng Zhao et al.

Summary: This paper introduces an innovative design of quasi-zero stiffness isolator with three pairs of oblique springs, optimizing for lower transmissibility and wider QZS region. The design is validated through static and dynamic analyses, showing improved performance compared to traditional isolators.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Article Engineering, Mechanical

Vibration transmission and energy flow of impact oscillators with nonlinear motion constraints created by diamond-shaped linkage mechanism

Wei Dai et al.

Summary: This study investigates the dynamic behavior and vibration transmission of impact oscillators with nonlinear motion constraints. It was found that the use of nonlinear constraint can lead to higher response amplitudes but lower force transmissibility compared to linear constraints.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Article Acoustics

A quasi-zero-stiffness dynamic vibration absorber

Yaopeng Chang et al.

Summary: This paper proposes a quasi-zero-stiffness (QZS) DVA for ultra-low frequency vibration absorption, which is designed using a simple oblique-spring model and verified for its dynamic behavior through the harmonic balance method (HBM) and numerical analyses. Experimental results demonstrate the excellent performance of QZS DVA in absorbing ultra-low frequency vibrations.

JOURNAL OF SOUND AND VIBRATION (2021)

Article Mathematics, Applied

Enhanced vibration isolation performance of quasi-zero-stiffness isolator by introducing tunable nonlinear inerter

Chaoran Liu et al.

Summary: This paper focuses on enhancing the QZS isolator by introducing tunable nonlinear inerter (TNI) to improve low-frequency isolation performance. Analytical calculations, stability analysis, and numerical simulations were conducted to compare the isolation performances of the QZS isolator and the QZS-TNI isolator. Results show that adding the inerter considerably suppresses the bending trend of the transmissibility curve, leading to a wider frequency range of isolation and a lower peak transmissibility.

COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION (2021)

Article Engineering, Multidisciplinary

In-plane quasi-zero-stiffness vibration isolator using magnetic interaction and cables: Theoretical and experimental study

Chaoran Liu et al.

Summary: This paper introduces an in-plane QZS isolator to isolate vibrations in arbitrary directions in the horizontal plane, achieved by combining magnetic rings with cables to provide negative and positive stiffness for quasi-zero-stiffness characteristic. Superior vibration isolation performance in both specified directions is demonstrated theoretically and experimentally.

APPLIED MATHEMATICAL MODELLING (2021)

Article Engineering, Mechanical

Nonlinear energy sink with limited vibration amplitude

Xiao-Feng Geng et al.

Summary: Research on a limited nonlinear energy sink using a piecewise spring device to restrict vibration amplitude shows that the vibration of the nonlinear energy sink can be effectively suppressed, although the vibration damping effect on the linear oscillator is weakened after the introduction of the piecewise spring.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Article Engineering, Mechanical

A nonlinear vibration isolator with quasi-zero-stiffness inspired by Miura-origami tube

Hesheng Han et al.

Summary: A nonlinear vibration isolator with quasi-zero-stiffness (QZS) is designed based on the bi-stable Miura-origami tube, featuring a negative stiffness element with four rods and a horizontal spring. The static characteristics and design procedure for the QZS isolation system with a lumped mass are studied, showcasing its high-static-low-dynamic stiffness property.

NONLINEAR DYNAMICS (2021)

Article Engineering, Mechanical

Design, analysis and semi-active control of a quasi-zero stiffness vibration isolation system with six oblique springs

Guilin Wen et al.

Summary: This study aims to expand the effective displacement range of quasi-zero stiffness systems through a semi-active control strategy. A novel vibration isolation system based on oblique springs and a coil spring is proposed, along with a feedback displacement strategy for stiffness adjustment. Theoretical analysis and virtual prototype simulation results show significant advantages in low-frequency vibration isolation performance for the proposed system.

NONLINEAR DYNAMICS (2021)

Article Engineering, Multidisciplinary

Design and experimental study of a compact quasi-zero-stiffness isolator using wave springs

Wang Qiang et al.

Summary: This paper presents a compact WQZS isolator designed by connecting a pair of repulsive magnet rings and a space-saving wave spring in parallel. Experimental results show that the WQZS isolator outperforms linear counterparts in reducing vibration frequency and peak transmissibility, making it suitable for low-frequency vibration isolation in space-limited environments.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2021)

Article Engineering, Mechanical

Vibration transmission and power flow in impact oscillators with linear and nonlinear constraints

Wei Dai et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Article Engineering, Mechanical

Versatile mass excited impact oscillator

Marian Wiercigroch et al.

NONLINEAR DYNAMICS (2020)

Article Engineering, Multidisciplinary

A two degree of freedom stable quasi-zero stiffness prototype and its applications in aseismic engineering

GuangNan Zhu et al.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2020)

Article Mathematics, Applied

Statics and dynamics of a nonlinear oscillator with quasi-zero stiffness behaviour for large deflections

Gianluca Gatti

COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION (2020)

Article Acoustics

Design of a quasi-zero stiffness isolation system for supporting different loads

Kan Ye et al.

JOURNAL OF SOUND AND VIBRATION (2020)

Article Engineering, Mechanical

Design and experimental investigation of ultra-low frequency vibration isolation during neonatal transport

Qiang Wang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Article Engineering, Mechanical

Chaos in impact oscillators not in vain: Dynamics of new mass excited oscillator

Dimitri Costa et al.

NONLINEAR DYNAMICS (2020)

Article Acoustics

Large stroke quasi-zero stiffness vibration isolator using three-link mechanism

Ge Yan et al.

JOURNAL OF SOUND AND VIBRATION (2020)

Article Engineering, Mechanical

A general methodology to establish the contact force model for complex contacting surfaces

Jia Ma et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Article Engineering, Mechanical

Nonlinear primary responses of a bilateral supported X-shape vibration reduction structure

Yongheng Yu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Article Engineering, Mechanical

Bursting vibration-based energy harvesting

Wen-An Jiang et al.

NONLINEAR DYNAMICS (2020)

Article Mechanics

New insights into the damping characteristics of a typical quasi-zero-stiffness vibration isolator

Chaoran Liu et al.

INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS (2020)

Article Acoustics

A tunable quasi-zero stiffness isolator based on a linear electromagnetic spring

Shujin Yuan et al.

JOURNAL OF SOUND AND VIBRATION (2020)

Article Engineering, Multidisciplinary

On the characteristics of a quasi-zero-stiffness vibration isolator with viscoelastic damper

Chaoran Liu et al.

APPLIED MATHEMATICAL MODELLING (2020)

Article Instruments & Instrumentation

Fluidic origami cellular structure with asymmetric quasi-zero stiffness for low-frequency vibration isolation

Sahand Sadeghi et al.

SMART MATERIALS AND STRUCTURES (2019)

Article Materials Science, Multidisciplinary

Stick-slip behavior of reversing the tubular woven bag covering a rigid tube-theoretical and numerical studies

Gang Zhao et al.

RESULTS IN PHYSICS (2019)

Article Engineering, Mechanical

Nonlinear primary and super-harmonic resonances of functionally graded carbon nanotube reinforced composite beams

Zhihua Wu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

Article Engineering, Mechanical

Nonlinear vibration isolation for fluid-conveying pipes using quasi-zero stiffness characteristics

Hu Ding et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Article Engineering, Mechanical

Degenerate grazing bifurcations in a three-degree-of-freedom impact oscillator

Shan Yin et al.

NONLINEAR DYNAMICS (2019)

Article Acoustics

A 3-axis torsion quasi-zero-stiffness-based sensor system for angular vibration measurement

Jiying Tuo et al.

JOURNAL OF VIBRATION AND CONTROL (2018)

Review Acoustics

Nonlinear dissipative devices in structural vibration control: A review

Zheng Lu et al.

JOURNAL OF SOUND AND VIBRATION (2018)

Article Engineering, Mechanical

Delay-controlled primary and stochastic resonances of the SD oscillator with stiffness nonlinearities

Tao Yang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

Article Engineering, Mechanical

Analytical study of a quasi-zero stiffness coupling using a torsion magnetic spring with negative stiffness

Yisheng Zheng et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

Article Engineering, Mechanical

Modeling dynamic behavior of MDOF systems with multiple bilinear springs

Yali Ma et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2018)

Article Engineering, Mechanical

Simulated and experimental studies on a high-static-low-dynamic stiffness isolator using magnetic negative stiffness spring

Guangxu Dong et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)

Article Engineering, Mechanical

A multi-directional vibration isolator based on Quasi-Zero-Stiffness structure and time-delayed active control

Jian Xu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)

Article Acoustics

Design of a Miniaturized Pneumatic Vibration Isolator With High-Static-Low-Dynamic Stiffness

Yuhu Shan et al.

JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2015)

Article Management

Knapsack problems with sigmoid utilities: Approximation algorithms via hybrid optimization

Vaibhav Srivastava et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2014)

Article Instruments & Instrumentation

Mimicking the cochlear amplifier in a cantilever beam using nonlinear velocity feedback control

Bryan S. Joyce et al.

SMART MATERIALS AND STRUCTURES (2014)

Article Engineering, Mechanical

Experimental investigation of a vibration isolation system using negative stiffness structure

Thanh Danh Le et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2013)

Article Engineering, Mechanical

Force and displacement transmissibility of a nonlinear isolator with high-static-low-dynamic-stiffness

A. Carrella et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2012)

Article Mathematics, Applied

The effect of discretization on the numerical simulation of the vibrations of the impacting cantilever beam

Barbara Blazejczyk-Okolewska et al.

COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION (2010)

Article Acoustics

A tunable high-static-low-dynamic stiffness vibration isolator

N. Zhou et al.

JOURNAL OF SOUND AND VIBRATION (2010)

Article Mathematics, Interdisciplinary Applications

Experimental chaos in nonlinear vibration isolation system

Jing-Jun Lou et al.

CHAOS SOLITONS & FRACTALS (2009)

Article Mathematics, Interdisciplinary Applications

Dynamics of a two-degree-of-freedom cantilever beam with impacts

Barbara Blazejczyk-Okolewska et al.

CHAOS SOLITONS & FRACTALS (2009)

Article Acoustics

On the force transmissibility of a vibration isolator with quasi-zero-stiffness

A. Carrella et al.

JOURNAL OF SOUND AND VIBRATION (2009)

Article Acoustics

Vibration Suppression of a Principal Parametric Resonance

L. Chen et al.

JOURNAL OF VIBRATION AND CONTROL (2009)

Review Acoustics

Recent advances in nonlinear passive vibration isolators

R. A. Ibrahim

JOURNAL OF SOUND AND VIBRATION (2008)

Article Mechanics

Impact oscillator with Hertz's model of contact

L Pust et al.

MECCANICA (2003)