☆ 4.7 Article

Numerical investigation on manifold immersion cooling scheme for lithium ion battery thermal management application

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Numerical investigation on lithium-ion battery thermal management utilizing a novel tree-like channel liquid cooling plate exchanger

Yiwei Fan et al.

Summary: This study designed a novel (anode, cathode) double-layer tree-like channel cooling plate, optimized the structural parameters, successfully reduced the maximum temperature and standard deviation of surface temperature, improved the heat dissipation performance, and also reduced the pressure drop.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Energy & Fuels

Thermal performance of a liquid-immersed battery thermal management system for lithium-ion pouch batteries

Haitao Wang et al.

Summary: A novel liquid-immersed battery thermal management system (BTMS) was designed to address the issues of high temperature rise and large temperature difference in lithium-ion pouch batteries. Experimental results showed that proper immersion depth and flow rate could greatly improve the thermal management performance, effectively reducing the temperature and temperature difference of the batteries.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Thermodynamics

Heat pipe air-cooled thermal management system for lithium-ion batteries: High power applications

Hamidreza Behi et al.

Summary: The study introduces a sandwiched configuration of heat pipes cooling system for lithium-titanate battery cells, and experimentally evaluates the impact of different cooling strategies on cell temperature. Results show that the system can effectively reduce the cell temperature.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Optimization of liquid cooling and heat dissipation system of lithium-ion battery packs of automobile

Huanwei Xu et al.

Summary: An optimization design framework is proposed to minimize the maximum temperature difference of automotive lithium battery pack, utilizing an adaptive ensemble of surrogate models based on an improved particle swarm optimization algorithm. The optimized scheme reduces the maximum temperature difference by 7.49% compared with the initial scheme, resulting in a more uniform temperature distribution of the lithium battery pack. The proposed framework has certain guiding significance for the liquid cooling design of the battery packs.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Numerical optimization of the cooling effect of the bionic spider-web channel cold plate on a pouch lithium-ion battery

Jianfeng Wang et al.

Summary: By designing a bionic spider-web channel structure, the cooling performance of lithium-ion batteries can be effectively enhanced. Among the structural parameters, the channel width has the greatest influence on the cooling performance of the cold plate, with the most optimal width being 3mm.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Thermal study of a passive cooling device operating through a bubble lifting CLTPT of NOVEC 7000 with a two-fluid condenser

M. A. Gomez et al.

Summary: An innovative cooling device based on the combination of two fluids in a closed loop two-phase thermosiphon has been proposed as an effective passive system for cooling electronic components. The system was tested under different conditions and exhibited robust working with good temperature control. The two-fluid condenser system showed highly efficient condensation and improved heat transfer coefficients in the condenser by 22 to 133%.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

Effect of parallel connection on 18650-type lithium ion battery thermal runaway propagation and active cooling prevention with water mist

Tong Liu et al.

Summary: The study investigates the cooling effect of water mist on thermal runaway propagation in lithium ion batteries, revealing that parallel connected battery modules can intensify the thermal runaway hazard, leading to enhanced heat transfer and decreased critical control temperature, thus reducing the cooling efficiency of water mist.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Avoiding thermal runaway propagation of lithium-ion battery modules by using hybrid phase change material and liquid cooling

Wencan Zhang et al.

Summary: This paper introduces a novel hybrid battery thermal management system based on phase change material (PCM) and liquid cooling, which utilizes PCM for maintaining operating temperature of the battery and liquid cooling system for preventing thermal runaway propagation. Numerical analysis shows that the system can meet heat dissipation demand under extreme operating conditions.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

A novel dielectric fluid immersion cooling technology for Li-ion battery thermal management

Mahesh Suresh Patil et al.

Summary: This study investigated the direct cooling performance of Li-ion batteries and battery packs for electric vehicles using dielectric fluid immersion cooling technology. Experimental results showed improved cooling performance with a 46.8% reduction in temperature using flowing dielectric fluid assisted with tab cooling. The development of an electrochemical-thermal model and its validation through numerical study and experimental data demonstrated the effectiveness of this cooling technology.

ENERGY CONVERSION AND MANAGEMENT (2021)

添加到收藏夹

Article Thermodynamics

A novel liquid cooling plate concept for thermal management of lithium-ion batteries in electric vehicles

Mohsen Akbarzadeh et al.

Summary: This paper presents an innovative liquid cooling plate (LCP) embedded with phase change material (PCM) for thermal management of electric vehicle (EV) batteries. The hybrid LCP, combining active and passive cooling methods, is 36% lighter than traditional aluminum LCP and provides heating solution to slow temperature loss. Experimental and computational analyses show that the hybrid LCP reduces energy consumption and improves temperature uniformity, making it a promising thermal management solution for EVs.

ENERGY CONVERSION AND MANAGEMENT (2021)

添加到收藏夹

Article Thermodynamics

Effect analysis on thermal profile management of a cylindrical lithium-ion battery utilizing a cellular liquid cooling jacket

Lei Sheng et al.

Summary: The study found that interlaced flow directions can result in lower temperature standard deviation and more uniform thermal distribution, while increasing fluid flow rate and channel size can enhance the performance of the cellular cooling plate. Glycol aqueous solution is more effective in reducing temperature difference and standard deviation of the cells compared to liquid water.

ENERGY (2021)

添加到收藏夹

Article Thermodynamics

Lightweight liquid cooling based thermal management to a prismatic hard-cased lithium-ion battery

Lei Sheng et al.

Summary: A lightweight liquid cooling solution was developed to cool a prismatic hard-cased cell, with studies on the effects of fluid flow directions, flow rates, channel dimensions, and cooling mediums on the cell's thermal distribution. Simulation and experiments showed that the lightweight thermal design effectively lowered the cooling plate weight and controlled the cell temperature within a desirable level. Increasing fluid flow rate and channel width can promote the cooling plate performance, while the choice of cooling medium can impact the cell's temperature difference.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Energy & Fuels

Enhancement of lithium-ion battery thermal management with the divergent-shaped channel cold plate

Wei Kong et al.

Summary: The new cold plate design utilizing divergent-shaped channels has enhanced heat dissipation capacity and minimized pressure drop, contributing to the development of effective battery cooling systems for electric vehicles.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Thermodynamics

Numerical investigation of the direct liquid cooling of a fast-charging lithium-ion battery pack in hydrofluoroether

Xiaojun Tan et al.

Summary: This paper proposes a novel direct liquid battery cooling system for fast-charging battery packs based on a hydrofluoroether coolant. Through high-fidelity CFD simulations, it is found that optimizing channel design and coolant velocity can improve energy density and reduce power consumption, while a multilayer structure and cross-flowing configuration can reduce temperature difference and standard deviation.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Energy & Fuels

Design optimization of forced air-cooled lithium-ion battery module based on multi-vents

Furen Zhang et al.

Summary: In this study, a multi-vent-based battery module for 18,650 lithium-ion batteries was optimized using computational fluid dynamics, demonstrating improved cooling performance compared to previous single-vent designs. The effects of vent number, size, and position, as well as battery cell spacing variations, were explored to achieve a superior thermal management strategy for forced air-cooling systems.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Thermodynamics

A lithium-ion battery-thermal-management design based on phase-change-material thermal storage and spray cooling

Shurong Lei et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Numerical investigation on PCM encapsulation shape used in the passive-active battery thermal management

Mojtaba Safdari et al.

ENERGY (2020)

添加到收藏夹

Article Thermodynamics

Water immersion cooling of high power density electronics

Patrick Birbarah et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Thermodynamics

Self-heating reaction and thermal runaway criticality of the lithium ion battery

Binbin Mao et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Thermodynamics

Thermal performance of cylindrical lithium-ion battery thermal management system integrated with mini-channel liquid cooling and air cooling

Wen Yang et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Design of a single-phase immersion cooling system through experimental and numerical analysis

Chin-Chi Cheng et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

COP optimization of propane pre-cooling cycle by optimal Fin design of heat exchangers: Efficiency and sustainability improvement

Ali Allahyarzadeh-Bidgoli et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Co-designing electronics with microfluidics for more sustainable cooling

Remco van Erp et al.

NATURE (2020)

添加到收藏夹

Article Thermodynamics

Study on the effect of varying channel aspect ratio on heat transfer performance of manifold microchannel heat sink

Yu-Hui Pan et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Thermodynamics

Heat-pipe based spray-cooling thermal management system for lithium-ion battery: Experimental study and optimization

Shurong Lei et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Energy & Fuels

Thermal management analysis using heat pipe in the high current discharging of lithium-ion battery in electric vehicles

Hamidreza Behi et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Energy & Fuels

Structure design and effect analysis on refrigerant cooling enhancement of battery thermal management system for electric vehicles

Ming Shen et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Thermal Management of Li-Ion Batteries With Single-Phase Liquid Immersion Cooling

David W. Sundin et al.

IEEE OPEN JOURNAL OF VEHICULAR TECHNOLOGY (2020)

添加到收藏夹

Article Thermodynamics

Novel leaf-like channels for cooling rectangular lithium ion batteries

Tao Deng et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Review Thermodynamics

Review on battery thermal management system for electric vehicles

Jaewan Kim et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Minimization of thermal non-uniformity in lithium-ion battery pack cooled by channeled liquid flow

Chunrong Zhao et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Thermal performance of cylindrical Lithium-ion battery thermal management system based on air distribution pipe

Haobing Zhou et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Dual-purpose cooling plate for thermal management of prismatic lithium-ion batteries during normal operation and thermal runaway

Abdul Haq Mohammed et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Numerical investigation on a lithium ion battery thermal management utilizing a serpentine-channel liquid cooling plate exchanger

Lei Sheng et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Engineering, Aerospace

An Impingement Cooling Using Swirling Jets Induced by Helical Rod Swirl Generators

S. Eiamsa-ard et al.

INTERNATIONAL JOURNAL OF TURBO & JET-ENGINES (2018)

添加到收藏夹

Review Thermodynamics

Effects of different coolants and cooling strategies on the cooling performance of the power lithium ion battery system: A review

Yuanwang Deng et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Thermodynamics

Structure optimization of parallel air-cooled battery thermal management system with U-type flow for cooling efficiency improvement

Kai Chen et al.

ENERGY (2018)

添加到收藏夹

Article Thermodynamics

A 2.5-D modeling approach for single-phase flow and heat transfer in manifold microchannels

Raphael Mandel et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Article Thermodynamics

Numerical investigation of a novel manifold micro-pin-fin heat sink combining chessboard nozzle-jet concept for ultra-high heat flux removal

Xing Ju et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Article Thermodynamics

Design of the cell spacings of battery pack in parallel air-cooled battery thermal management system

Kai Chen et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Article Thermodynamics

Thermal management of lithium ion batteries using graphene coated nickel foam saturated with phase change materials

Abid Hussain et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2018)

添加到收藏夹

Article Thermodynamics

Investigation on thermal management performance of PCM-fin structure for Li-ion battery module in high-temperature environment

Ping Ping et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

添加到收藏夹

Article Thermodynamics

Battery thermal management system for electric vehicle using heat pipes

Joshua Smith et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2018)

添加到收藏夹

Article Energy & Fuels

Design of Parallel Air-Cooled Battery Thermal Management System through Numerical Study

Kai Chen et al.

ENERGIES (2017)

添加到收藏夹

Review Thermodynamics

Thermal issues about Li-ion batteries and recent progress in battery thermal management systems: A review

Huaqiang Liu et al.

ENERGY CONVERSION AND MANAGEMENT (2017)

添加到收藏夹

Article Engineering, Electrical & Electronic

Experimental and numerical study of 3D stacked dies under forced air cooling and water immersion cooling

Delong Qiu et al.

MICROELECTRONICS RELIABILITY (2017)

添加到收藏夹

Article Thermodynamics

Thermal performance of liquid cooling based thermal management system for cylindrical lithium-ion battery module with variable contact surface

Zhonghao Rao et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Thermal design and simulation of mini-channel cold plate for water cooled large sized prismatic lithium-ion battery

S. Panchal et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

3-D CFD modeling and experimental testing of thermal behavior of a Li-Ion battery

Emre Gumussu et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Energy & Fuels

Coupled electrochemical thermal modelling of a novel Li-ion battery pack thermal management system

Suman Basu et al.

APPLIED ENERGY (2016)

添加到收藏夹

Article Thermodynamics

Experimental investigation of a passive thermal management system for high-powered lithium ion batteries using nickel foam-paraffin composite

Abid Hussain et al.

ENERGY (2016)

添加到收藏夹

Article Thermodynamics

Investigation of the thermal performance of axial-flow air cooling for the lithium-ion battery pack

Tairan Yang et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2016)

添加到收藏夹

Article Thermodynamics

Heat transfer of swirling impinging jets ejected from Nozzles with twisted tapes utilizing CFD technique

Younes Amini et al.

CASE STUDIES IN THERMAL ENGINEERING (2015)

添加到收藏夹

Article Thermodynamics

Thermodynamic assessment of active cooling/heating methods for lithium-ion batteries of electric vehicles in extreme conditions

Xiongwen Zhang et al.

ENERGY (2014)

添加到收藏夹

Article Energy & Fuels

Thermal analysis of high-power lithium-ion battery packs using flow network approach

G. Karimi et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2014)

添加到收藏夹

Review Green & Sustainable Science & Technology

Review on thermal management systems using phase change materials for electronic components, Li-ion batteries and photovoltaic modules

Ziye Ling et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)

添加到收藏夹

Article Electrochemistry

Heating strategies for Li-ion batteries operated from subzero temperatures

Yan Ji et al.

ELECTROCHIMICA ACTA (2013)

添加到收藏夹

Article Thermodynamics

Lithium ion battery production

Antti Vayrynen et al.

JOURNAL OF CHEMICAL THERMODYNAMICS (2012)

添加到收藏夹

Article Chemistry, Physical

Reciprocating air flow for Li-ion battery thermal management to improve temperature uniformity

Rajib Mahamud et al.

JOURNAL OF POWER SOURCES (2011)

添加到收藏夹

Article Chemistry, Physical

Modeling thermal management of lithium-ion PNGV batteries

P Nelson et al.

JOURNAL OF POWER SOURCES (2002)

添加到收藏夹

Article Chemistry, Physical

Battery thermal models for hybrid vehicle simulations

AA Pesaran

JOURNAL OF POWER SOURCES (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.