相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。A coupled 3D wear and fatigue numerical procedure: Application to fretting problems in ultra-high strength steel wires
I. Llavori et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Validating the Methods to Process the Stress Path in Multiaxial High-Cycle Fatigue Criteria
Jan Papuga et al.
MATERIALS (2021)
Experimental and numerical fretting fatigue using a new test fixture
Steffen L. Sunde et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
A novel predictive model for multiaxial fatigue in carburized bevel gears
Stephan Andre Bohme et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)
Evaluation of data sets usable for validating multiaxial fatigue strength criteria
Jan Papuga et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
On the use of the theory of critical distances with mesh control for fretting fatigue lifetime assessment
A. Zabala et al.
TRIBOLOGY INTERNATIONAL (2020)
Study of size effects in fretting fatigue
R. A. Cardoso et al.
TRIBOLOGY INTERNATIONAL (2020)
Modeling the fretting fatigue endurance from partial to gross slip: The effect of debris layer
P. Arnaud et al.
TRIBOLOGY INTERNATIONAL (2020)
A multi-scale strategy to predict fretting-fatigue endurance of overhead conductors
J. Said et al.
TRIBOLOGY INTERNATIONAL (2020)
Fretting fatigue of 7050-T7451 Al alloy: the influence of bulk mean stress
Sabrina Vantadori et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Fatigue of two contacting wires of the ACSR Ibis 397.5 MCM conductor: Experiments and life prediction
P. H. C. Rocha et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Wear numerical assessment for partial slip fretting fatigue conditions
R. A. Cardoso et al.
TRIBOLOGY INTERNATIONAL (2019)
Investigation of fretting fatigue behavior and micro-structure evolution in LZ50 steel subjected to torsional load
Zhibiao Xu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Fretting fatigue behavior of 316L stainless steel under combined loading conditions
G. H. Farrahi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Steps to increase practical applicability of PragTic software
Jiri Tomcala et al.
ADVANCES IN ENGINEERING SOFTWARE (2019)
Validation data set for testing the criteria for multiaxial fatigue strength estimation
J. Papuga et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2018)
On the estimation of finite lifetime under fretting fatigue loading
C. T. Kouanga et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Mean stress effect in stress-life fatigue prediction re-evaluated
Jan Papuga et al.
12TH INTERNATIONAL FATIGUE CONGRESS (FATIGUE 2018) (2018)
Fatigue performance of overhead conductors tested under the same value of H/w parameter
R. B. Kalombo et al.
7TH INTERNATIONAL CONFERENCE ON FATIGUE DESIGN, FATIGUE DESIGN 2017 (2018)
A fretting damage correction factor applicable to the McDiarmid criterion of plain high-cycle fatigue
M. Nesladek et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2017)
Multiaxial fatigue strength of common structural steel and the response of some estimation methods
Jan Papuga et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
A simplified extension of the Crack Analogue model for fretting fatigue with varying normal load
M. Ciavarella et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2017)
A non-collinear fretting-fatigue experiment to compare multiaxial fatigue criteria: critical shear plane strategy is better than invariant formulations
C. Gandiolle et al.
TRIBOLOGY INTERNATIONAL (2017)
Fretting-contact-induced crack opening/closure behaviour in fretting fatigue
Nitikorn Noraphaiphipaksa et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
An investigation of fretting fatigue in a circular arc dovetail assembly
Liang Shi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
Fretting Fatigue Experiment and Analysis of AlSi9Cu2Mg Alloy
Jun Wang et al.
MATERIALS (2016)
Numerical study of fatigue crack initiation and propagation on optimally designed cruciform specimens
R. Baptista et al.
XV PORTUGUESE CONFERENCE ON FRACTURE, PCF 2016 (2016)
A fretting related damage parameter for fretting fatigue life prediction
Xin Li et al.
INTERNATIONAL JOURNAL OF FATIGUE (2015)
Fatigue life of 7075-T6 aluminium alloy under fretting condition
Jacob Muthu
THEORETICAL AND APPLIED FRACTURE MECHANICS (2014)
Prediction of fretting fatigue crack initiation and propagation lifetime for cylindrical contact configuration
Reza Hojjati-Talemi et al.
TRIBOLOGY INTERNATIONAL (2014)
T-stress based short crack growth model for fretting fatigue
J. Bellecave et al.
TRIBOLOGY INTERNATIONAL (2014)
Effect of fretting on fatigue performance of Ti-1023 titanium alloy
G. Q. Wu et al.
WEAR (2014)
Fretting fatigue - Experimental and numerical approaches
M. Nesladek et al.
INTERNATIONAL JOURNAL OF FATIGUE (2012)
Experimental fatigue testing of a fretting complete contact and numerical life correlation using X-FEM
M. Sabsabi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2011)
Simple parameters to predict effect of surface damage on fretting fatigue
J. Ding et al.
INTERNATIONAL JOURNAL OF FATIGUE (2011)
Fretting fatigue behavior of Al7075-T6 at sub-zero temperature
G. H. Majzoobi et al.
TRIBOLOGY INTERNATIONAL (2011)
Fretting damage in thin sheets: Analysis of an experimental configuration
M. R. Hirsch et al.
TRIBOLOGY INTERNATIONAL (2011)
Crack initiation and endurance limit of a hard steel under multiaxial cyclic loads
H. Bomas et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2010)
A multiaxial fretting fatigue test for spline coupling contact
P. M. Wavish et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2009)
Mean stress effects in stress-life fatigue and the Walker equation
N. E. Dowling et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2009)
Multiaxial fretting fatigue testing and prediction for splined couplings
D. Houghton et al.
INTERNATIONAL JOURNAL OF FATIGUE (2009)
Prismatic hull: A new measure of shear stress amplitude in multiaxial high cycle fatigue
E. N. Mamiya et al.
INTERNATIONAL JOURNAL OF FATIGUE (2009)
On the use of multiaxial fatigue criteria for fretting fatigue life assessment
Carlos Navarro et al.
INTERNATIONAL JOURNAL OF FATIGUE (2008)
Two new multiaxial criteria for high cycle fatigue computation
Jan Papuga et al.
INTERNATIONAL JOURNAL OF FATIGUE (2008)
Enhanced Ruiz criterion for the evaluation of crack initiation in contact subjected to fretting fatigue
J. Vidner et al.
INTERNATIONAL JOURNAL OF FATIGUE (2007)
Contact-evolution based prediction of fretting fatigue life: Effect of slip amplitude
J. J. Madge et al.
WEAR (2007)
On the use of the Theory of Critical Distances and the Modified Wohler Curve Method to estimate fretting fatigue strength of cylindrical contacts
J. A. Araujo et al.
INTERNATIONAL JOURNAL OF FATIGUE (2007)
Progression of fretting fatigue damage in Ti-6Al-4V
Alisha Hutson et al.
TRIBOLOGY INTERNATIONAL (2006)
Using enclosing ellipsoids in multiaxial fatigue strength criteria
N Zouain et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2006)
Recent developments in the understanding of fretting fatigue
D Nowell et al.
ENGINEERING FRACTURE MECHANICS (2006)
The effect of angle on dovetail fretting experiments in Ti-6Al-4V
PJ Golden et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2005)
A simplified fretting test methodology for complex shaft couplings
TR Hyde et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2005)
Effects of slip on fretting behavior: experiments and analyses
O Jin et al.
WEAR (2004)
The use of multiaxial fatigue models to predict fretting fatigue life of components subjected to different contact stress fields
JA Araujo et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2004)
A study on fretting friction evolution and fretting fatigue crack initiation for a spherical contact
B Alfredsson et al.
INTERNATIONAL JOURNAL OF FATIGUE (2004)
Slip regime explanation of observed size effects in fretting
R Magaziner et al.
WEAR (2004)
Fatigue strength of heat-treatable steel under static multiaxial compression stresses
HP Lüpfert et al.
ADVANCED ENGINEERING MATERIALS (2004)
A note on the crack analogue model for fretting fatigue
M Ciavarella et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2003)
Fretting fatigue crack initiation behavior using process volume approach and finite element analysis
S Naboulsi et al.
TRIBOLOGY INTERNATIONAL (2003)
Fretting fatigue crack initiation mechanism in Ti-6Al-4V
SA Namjoshi et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2002)
The effect of rapidly varying contact stress fields on fretting fatigue
JA Araújo et al.
INTERNATIONAL JOURNAL OF FATIGUE (2002)
Efficient algorithms for calculation of shear stress amplitude and amplitude of the second invariant of the stress deviator in fatigue criteria applications
A Bernasconi
INTERNATIONAL JOURNAL OF FATIGUE (2002)
Evaluation of multiaxial fatigue life prediction methodologies for Ti-6Al-4V
AR Kallmeyer et al.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2002)
Combined experimental-numerical investigation of fretting fatigue crack initiation
CD Lykins et al.
INTERNATIONAL JOURNAL OF FATIGUE (2001)