☆ 4.7 Article

Computational model for bending fatigue prediction of surface hardened spur gears based on the multilayer method

INTERNATIONAL JOURNAL OF FATIGUE (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Multidisciplinary

On the determination of the bending fatigue strength in and above the very high cycle fatigue regime of shot-peened gears

D. Fuchs et al.

Summary: To meet the demands of lightweight design goals and performance enhancement, shot-peening treatment can be applied to increase bending fatigue strength of gears in gearboxes. However, shot-peened gears may exhibit tooth root fracture damage at high load cycles, potentially leading to a further decrease in bending load carrying capacity.

FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH (2022)

添加到收藏夹

Article Engineering, Mechanical

Numerical model for bending fatigue life estimation of carburized spur gears with consideration of the adjacent tooth effect

Kresimir Vuckovic et al.

Summary: This paper proposes a computational model for predicting bending fatigue failure of case hardened spur gears, taking into account the effect of the adjacent tooth on bending fatigue lives. Through the model, it is found that bending fatigue lives can vary by approximately 22% when considering the adjacent tooth effect, which should be considered when estimating bending fatigue lives of spur gears.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

添加到收藏夹

Article Chemistry, Physical

Residual Stress Distribution Design for Gear Surfaces Based on Genetic Algorithm Optimization

Zhou Chen et al.

Summary: The study investigates the rolling contact fatigue of gear surfaces in a heavy loader gearbox using a critical plane-based multiaxial Fatemi-Socie criterion. It finds that the optimum residual stress distribution can maximize fatigue initiation life, especially when the friction coefficient is above its critical value. Deviation from the optimum residual stress distribution impacts fatigue initiation life, providing a useful guideline for designing residual stress distribution.

MATERIALS (2021)

添加到收藏夹

Article Engineering, Mechanical

Analytical approach for low and high cycle bending fatigue life prediction of carburized gear steel specimens

I Cular et al.

ENGINEERING FAILURE ANALYSIS (2020)

添加到收藏夹

Article Engineering, Mechanical

Investigations on the tooth root bending strength and the fatigue fracture characteristics of case-carburized and shot-peened gears of different sizes

K. J. Winkler et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2019)

添加到收藏夹

Article Engineering, Mechanical

A model approach for considering nonmetallic inclusions in the calculation of the local tooth root load-carrying capacity of high-strength gears made of high-quality steels

D. Fuchs et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Investigations into non-metallic inclusion crack area characteristics relevant for tooth root fracture damages of case carburised and shot-peened high strength gears of different sizes made of high-quality steels

D. Fuchs et al.

FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH (2019)

添加到收藏夹

Article Engineering, Mechanical

Effect of friction in a single-tooth fatigue test

Kresimir Vuckovic et al.

INTERNATIONAL JOURNAL OF FATIGUE (2018)

添加到收藏夹

Article Engineering, Industrial

Residual stress interaction on gear manufacturing

Ronnie Rego et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Mechanical

Cyclic deformation and fatigue behavior of carburized automotive gear steel and predictions including multiaxial stress states

Bonglae Jo et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

添加到收藏夹

Article Engineering, Mechanical

Effect of microshot peened treatment on the fatigue behavior of laser-melted W6Mo5Cr4V2 steel gear

You Lv et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

添加到收藏夹

Article Optics

Effect of laser shock peening on bending fatigue performance of AISI 9310 steel spur gear

Chong Peng et al.

OPTICS AND LASER TECHNOLOGY (2017)

添加到收藏夹

Article Engineering, Mechanical

Surface versus internal fatigue crack initiation in steel: Influence of mean stress

Vidit Gaur et al.

INTERNATIONAL JOURNAL OF FATIGUE (2016)

添加到收藏夹

Article Engineering, Mechanical

A modification of Morrow and Smith-Watson-Topper mean stress correction models

A. Ince et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2011)

添加到收藏夹

Article Materials Science, Characterization & Testing

Monotonic and Cyclic Deformations of Case-Hardened Steels Including Residual Stress Effects

F. Yin et al.

STRAIN (2011)

添加到收藏夹

Article Engineering, Mechanical

Variable amplitude fatigue behavior and life predictions of case-hardened steels

Fengjie Yin et al.

INTERNATIONAL JOURNAL OF FATIGUE (2010)

添加到收藏夹

Article Mechanics

Modeling fatigue crack nucleation at primary inclusions in carburized and shot-peened martensitic steel

Jixi Zhang et al.

ENGINEERING FRACTURE MECHANICS (2009)

添加到收藏夹

Article Engineering, Mechanical

Influence of different load models on gear crack path shapes and fatigue lives

S. Podrug et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2008)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Computational model for the analysis of bending fatigue in gears

J Kramberger et al.

COMPUTERS & STRUCTURES (2004)

添加到收藏夹

Article Engineering, Mechanical

A computational model for determination of service life of gears

S Glodez et al.

INTERNATIONAL JOURNAL OF FATIGUE (2002)

添加到收藏夹

Article Engineering, Mechanical

Strain-controlled fatigue properties of steels and some simple approximations

ML Roessle et al.

INTERNATIONAL JOURNAL OF FATIGUE (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.