4.6 Article

Modeling and Optimizing N/O-Enriched Bio-Derived Adsorbents for CO2 Capture: Machine Learning and DFT Calculation Approaches

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Synergetic effect of N/O functional groups and microstructures of activated carbon on supercapacitor performance by machine learning

Mohammad Rahimi et al.

Summary: This study investigates the influence of microstructural features, N/O configurations, and operational parameters on the capacitance performance of activated carbon electrodes through an artificial neural network. It provides theoretical support for the fabrication of N/O co-doped porous carbon electrodes with high specific capacitance.

JOURNAL OF POWER SOURCES (2022)

Article Nanoscience & Nanotechnology

Balancing data for generalizable machine learning to predict glass-forming ability of ternary alloys

Yi Yao et al.

Summary: This paper investigates the issue of data imbalance in ternary alloy systems, and proposes a new method to handle imbalance data and train machine learning models on balanced datasets. The results show that training models on balanced datasets can solve overfitting problems and improve predictive generalizability.

SCRIPTA MATERIALIA (2022)

Article Multidisciplinary Sciences

The role of surface chemistry on CO2 adsorption in biomass-derived porous carbons by experimental results and molecular dynamics simulations

Mobin Safarzadeh Khosrowshahi et al.

Summary: Biomass-derived porous carbons have been synthesized from celery biomass and their adsorption parameters and surface chemistry have been investigated for CO2 capture.

SCIENTIFIC REPORTS (2022)

Article Chemistry, Multidisciplinary

Adsorption Equilibrium, Thermodynamic, and Kinetic Study of O2/N2/CO2 on Functionalized Granular Activated Carbon

Hossein Mashhadimoslem et al.

Summary: In this study, a volumetric system was used to evaluate the adsorption performance of carbon-based adsorbents for oxygen, nitrogen, and carbon dioxide gases. The effects of ZnCl2 addition and heat treatment temperature on the adsorptive capabilities were investigated. The results showed that the addition of ZnCl2 improved the adsorption capacity for oxygen. Additionally, the adsorption isotherm and kinetic models indicated that the optimal sample exhibited the highest adsorption capacity for oxygen compared to nitrogen and carbon dioxide.

ACS OMEGA (2022)

Article Computer Science, Artificial Intelligence

Modeling and classifying the in-operando effects of wear and metal contaminations of lubricating oil on diesel engine: A machine learning approach

Mohammad Rahimi et al.

Summary: This study investigates the effects of oil metal pollution on diesel engine conditions using lubricating oil analysis and machine learning models. The results show that the RBF-NN model outperforms the SVM model in predicting and diagnosing engine conditions.

EXPERT SYSTEMS WITH APPLICATIONS (2022)

Article Engineering, Environmental

Anthracite coal-derived activated carbon as an effectiveness adsorbent for superior gas adsorption and CO2 / N2 and CO2 / CH4 selectivity: Experimental and DFT study

Hadi Hamyali et al.

Summary: In this study, anthracite coal derived activated carbon was synthesized and applied as an adsorbent for CO2, N-2, and CH4 uptake. The synthesized adsorbents exhibited a large surface area and excellent adsorption features, enhancing gas uptake capacity.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2022)

Article Energy & Fuels

Designing a novel N-doped adsorbent with ultrahigh selectivity for CO2: waste biomass pyrolysis and two-step activation

Zhixiu Yang et al.

Summary: The research successfully prepared N-doped carbonaceous CO2 adsorbents with high selectivity using waste walnut shell, showing high CO2 adsorption capacity at 0 degrees C. Nitrogen content, V-m/V-t, and porous texture characteristics were found to be crucial in impacting the CO2 adsorption of these materials under atmospheric pressure. Additionally, the adsorbents exhibited promising selectivity for CO2/N-2 at low pressure.

BIOMASS CONVERSION AND BIOREFINERY (2021)

Article Chemistry, Physical

Facile preparation of N-doped activated carbon produced from rice husk for CO2 capture

Song He et al.

Summary: Activated carbons (AC) were prepared using rice husk as feedstock, with surface modification using chitosan as nitrogen source. The nitrogen-doped ACs showed higher adsorption heat and exhibited good adsorption behavior described by the Freundlich model.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Computer Science, Artificial Intelligence

A comparative study of statistical and soft computing techniques for reliability prediction of automotive manufacturing

Hamzeh Soltanali et al.

Summary: This paper examines the application of soft computing techniques in predicting operational reliability in the automotive manufacturing industry, and the results show that soft computing techniques outperform statistical models in accuracy and precision.

APPLIED SOFT COMPUTING (2021)

Article Engineering, Environmental

A strategy for understanding the enhanced anaerobic co-digestion via dual-heteroatom doped bio-based carbon and its functional groups

Bingjie Li et al.

Summary: This work fabricated two types of dual-heteroatom doped bio-based carbon, with N, P co-doped bio-based carbon showing the best methane production and digestion performance in anaerobic co-digestion system. Additionally, the digestates exhibited good thermal stability and potential as organic fertilizer.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

Neural network based optimization for cascade filling process of on-board hydrogen tank

Jinsheng Xiao et al.

Summary: A study established an optimization methodology to determine initial thermodynamic conditions for compressed hydrogen storage with minimum energy consumption; training a neural network for predicting optimal filling parameters can effectively reduce energy consumption.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Energy & Fuels

An Integrated Fuzzy Fault Tree Model with Bayesian Network-Based Maintenance Optimization of Complex Equipment in Automotive Manufacturing

Hamzeh Soltanali et al.

Summary: The study identifies process integrity, insufficient data, and system complexity in the automotive manufacturing sector as major uncertainty factors influencing failure probability. It introduces a fuzzy fault tree analysis approach to estimate failure probability for maintenance planning, and incorporates Bayesian network theory to address the undynamic relationship between failure in complex systems. The results show that while changes in decision attributes have minimal impact on failure probability, the Bayesian network model significantly improves prediction accuracy by considering dynamic relationships.

ENERGIES (2021)

Article Green & Sustainable Science & Technology

Machine learning approaches to rediscovery and optimization of hydrogen storage on porous bio-derived carbon

Mohammad Rahimi et al.

Summary: Three machine learning models were used to study hydrogen adsorption of activated carbons, revealing the importance of microstructure properties in hydrogen uptake. Support vector machine showed high accuracy in predicting hydrogen adsorption, and optimization using genetic algorithm led to a 2.5 wt% increase in hydrogen uptake.

JOURNAL OF CLEANER PRODUCTION (2021)

Review Agronomy

Applications of artificial intelligence-based modeling for bioenergy systems: A review

Mochen Liao et al.

Summary: AI has been increasingly applied in bioenergy systems to address challenges related to feedstock variability, conversion economics, and supply chain reliability. The review of 164 articles published between 2005 and 2019 shows that AI techniques have unique capabilities in predicting biomass properties, process performance of biomass conversion, biofuel properties, and supply chain modeling and optimization. The future research should focus on developing standardized procedures for selecting AI techniques, enhancing data sharing, and exploring the potential of AI to support sustainable development of bioenergy systems.

GLOBAL CHANGE BIOLOGY BIOENERGY (2021)

Review Green & Sustainable Science & Technology

Chemically modified carbonaceous adsorbents for enhanced CO2 capture: A review

Urooj Kamran et al.

Summary: This article reviews the application of carbonaceous materials in CO2 adsorption, discusses the impact and role of various modification methods, and summarizes future research challenges and prospects.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Green & Sustainable Science & Technology

A multi-data-driven procedure towards a comprehensive understanding of the activated carbon electrodes performance (using for supercapacitor) employing ANN technique

Mohammad Rahimi et al.

Summary: Biomass resources play a significant role in the preparation of sustainable carbon materials for supercapacitors. Studies show that Artificial Neural Network (ANN) modeling and Radial Basis Function (RBF) modeling can accurately assess the impact of electrode preparation processes and operational conditions on the capacitive performance of carbon-based electrodes, demonstrating that a combination of quantitative and qualitative variables can achieve better results.

RENEWABLE ENERGY (2021)

Review Environmental Sciences

CO2 capture by adsorption on biomass-derived activated char: A review

Chirag Goel et al.

Summary: This paper reviews the method of carbon capture and storage, specifically the CO2 adsorption capabilities of biomass-derived hydrochar, and discusses the various factors affecting CO2 uptake.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Article Engineering, Chemical

Machine Learning-based approach for Tailor-Made design of ionic Liquids: Application to CO2 capture

Kexin Zhang et al.

Summary: This study introduces a machine learning-based approach for designing tailored ionic liquids (ILs) for specific target applications, using a combination of multi-player Monte Carlo tree search and recurrent neural network. The results show that high-performance ILs can be efficiently designed using this algorithm. Topological data analysis also demonstrates that the algorithm allows for wide exploration of materials space to find high-performing ILs with good diversity.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Engineering, Chemical

Heteroatom-doped porous carbons exhibit superior CO2 capture and CO2/N2 selectivity: Understanding the contribution of functional groups and pore structure

Xiancheng Ma et al.

Summary: The study demonstrates that oxygen and nitrogen-doped porous carbon materials have a significant influence on CO2 adsorption and CO2/N-2 selectivity; the contributions of pore structure and functional groups are roughly 62% and 38% respectively; nitrogen and oxygen-doped porous carbons enhance the electrostatic interactions between the carbon surface and CO2 molecules, affecting CO2/N-2 selectivity.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Chemistry, Multidisciplinary

Machine Learning-Driven Discovery of Metal-Organic Frameworks for Efficient CO2 Capture in Humid Condition

Xiangyu Zhang et al.

Summary: This study successfully designed target-specific MOFs for CO2 capture in humid conditions and identified the structure-property relationship that moderate D-i and accessible surface area values are desirable for high-performing MOFs, which is attributed to the trade-off relationship between good adsorption selectivity and high adsorption capacity.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Article Chemistry, Applied

Nitrogen-doped hierarchically porous carbon spheres for low concentration CO2 capture

Yang Li et al.

Summary: Spherical carbon beads with effective CO2 capture capability were synthesized via co-pyrolyzation of poly(vinylidene chloride) and melamine, resulting in nitrogen-doped hierarchically porous carbon spheres. These carbon spheres exhibited outstanding CO2 capture performance due to their enriched nitrogen functionalities and special hierarchical porous structure.

JOURNAL OF ENERGY CHEMISTRY (2021)

Article Chemistry, Multidisciplinary

Oxygen and nitrogen enriched pectin-derived micro-meso porous carbon for CO2 uptake

Milad Vafaeinia et al.

Summary: Oxygen and nitrogen enriched micro-meso porous carbon powders were synthesized from pectin and melamine, and characterized by various analytical techniques to reveal their high nitrogen and oxygen content, as well as excellent CO2 adsorption performance.

RSC ADVANCES (2021)

Article Energy & Fuels

Machine learning assisted rediscovery of methane storage and separation in porous carbon from material literature

Chi Zhang et al.

Summary: Porous carbon is considered a promising absorbent for methane storage, with its uptake capacity and selectivity dependent on textural structures. Utilizing machine learning, a model was able to predict methane uptake based on specific surface area, pore volume, temperature, and pressure, and construct a map of uptake performance. The model was also extended to explore CO2/CH4 selectivity in the low CH4 uptake region.
Article Chemistry, Multidisciplinary

Synthesis and characterization of biomass-derived surface-modified activated carbon for enhanced CO2 adsorption

Azeem Sarwar et al.

Summary: In this study, activated carbon based adsorbents were synthesized from hydro-char through modified hydrothermal carbonization and thermochemical activation methods, exhibiting high specific surface area and microporous volume with notable CO2 adsorption capacity. The experimental data fit various adsorption isotherm models, and the adsorption of CO2 was found to be spontaneous and exothermic on the adsorbent.

JOURNAL OF CO2 UTILIZATION (2021)

Article Chemistry, Physical

New insights into hydrogen uptake on porous carbon materials via explainable machine learning

Muhammad Irfan Maulana Kusdhany et al.

Summary: The study found that pressure and BET surface area are the two strongest predictors of excess hydrogen uptake in porous carbon materials, with oxygen content also showing a positive correlation. Additionally, ultramicropores are more positively correlated with excess uptake than micropores, although the effect is relatively small compared to other factors such as BET surface area and total pore volume.

CARBON (2021)

Article Environmental Sciences

Green and simple approach for low-cost bioproducts preparation and CO2 capture

Gabriela Duran-Jimenez et al.

Summary: This study introduces a simple and fast microwave processing method for the preparation of bio-products without the use of catalysts or chemical activation. The biochar produced displayed good CO2 capture capacity, gas selectivity, fast adsorption kinetics, and high reusability. Higher microwave energies were found to enhance bio-oil yield and promote the formation of specific compounds, while trace levels of H-2 and CH4 were identified in the bio-gas.

CHEMOSPHERE (2021)

Article Engineering, Environmental

Applied Machine Learning for Prediction of CO2 Adsorption on Biomass Waste-Derived Porous Carbons

Xiangzhou Yuan et al.

Summary: Researchers analyzed the adsorption characteristics and composition of biomass waste-derived porous carbons (BWDPCs) through machine learning and found that the gradient boosting decision trees (GBDT) model performed the best in prediction, showing high accuracy in CO2 adsorption.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Article Engineering, Chemical

Development of Predictive Models for Activated Carbon Synthesis from Different Biomass for CO2 Adsorption Using Artificial Neural Networks

Hossein Mashhadimoslem et al.

Summary: The study focused on modeling the interactions between CO2 uptake and different parameters of activated carbon adsorbent synthesis in biomass types using artificial neural networks. The research developed four ANN structures to predict the specific surface area and CO2 adsorption capacity of the adsorbents, achieving high accuracy with MSE validation results exceeding 0.99. The ANN approach was found to be a promising tool for accurately predicting specific adsorbents of AC biomass types for CO2 capture.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

Article Engineering, Chemical

Biomass-based hierarchical porous carbon with ultrahigh surface area for super-efficient adsorption and separation of acetone and methanol

Xiancheng Ma et al.

Summary: This study developed a new method for synthesizing biomass-based hierarchical porous carbons with high surface area and adsorption capacity for acetone and methanol. The adsorption amount at high pressure is mainly determined by the total pore volume, while at low pressure, oxygen groups provide adsorption sites. Additionally, narrow micropores determine the acetone/methanol selectivity, with no effect from oxygen groups.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Chemistry, Multidisciplinary

Biomass derived hierarchical porous carbon for high-performance O2/N2 adsorption; a new green self-activation approach

Hossein Mashhadimoslem et al.

Summary: A new green porous carbon adsorbent was synthesized using a self-activation technique, showing stable O-2/N-2 separation and high reusability. This technology presents a promising strategy for producing eco-friendly porous carbon on an industrial scale.

RSC ADVANCES (2021)

Article Engineering, Environmental

Low temperature CO2 capture on biomass-derived KOH-activated hydrochar established through hydrothermal carbonization with water-soaking pre-treatment

Nurul Azrin Zubbri et al.

Summary: This study investigates the development of activated hydrochar as a low-cost bio-sorbent for low temperature CO2 capture. It found that water-soaking pretreatment, hydrothermal carbonization, and chemical activation could individually enhance the CO2 capture capacity of the resulting adsorbent, and verified the high affinity of the developed adsorbent towards CO2.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Article Engineering, Chemical

Nitrogen-doping microporous adsorbents prepared from palm kernel with excellent CO2 capture property

Rong Ma et al.

CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2020)

Article Energy & Fuels

Nitrogen-doping activated biomass carbon from tea seed shell for CO2 capture and supercapacitor

Cui Quan et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)

Article Computer Science, Artificial Intelligence

An improved fuzzy inference system-based risk analysis approach with application to automotive production line

Hamzeh Soltanali et al.

NEURAL COMPUTING & APPLICATIONS (2020)

Review Green & Sustainable Science & Technology

Biochar-based adsorbents for carbon dioxide capture: A critical review

Pavani Dulanja Dissanayake et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

Article Engineering, Environmental

Insights into the catalytic behavior of LaMnO3 perovskite for Hg0 oxidation by HCl

Zhen Wang et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Article Chemistry, Multidisciplinary

A Universal Machine Learning Algorithm for Large-Scale Screening of Materials

George S. Fanourgakis et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Article Engineering, Environmental

Synthesis of functionalized 3D microporous carbon foams for selective CO2 capture

Xin Liu et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Green & Sustainable Science & Technology

Sustainable gasification biochar as a high efficiency adsorbent for CO2 capture: A facile method to designer biochar fabrication

Pavani Dulanja Dissanayake et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

Article Environmental Sciences

Carbon dioxide capture in biochar produced from pine sawdust and paper mill sludge: Effect of porous structure and surface chemistry

Avanthi Deshani Igalavithana et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

Article Chemistry, Multidisciplinary

Chitosan-Based N-Doped Carbon Materials for Electrocatalytic and Photocatalytic Applications

Ayesha Khan et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Article Engineering, Mechanical

Arbitrary polynomial chaos expansion method for uncertainty quantification and global sensitivity analysis in structural dynamics

Hua-Ping Wan et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Article Environmental Sciences

Microporous carbon nanoflakes derived from biomass cork waste for CO2 capture

Xuefeng Zhang et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

Article Green & Sustainable Science & Technology

Machine learning exploration of the critical factors for CO2 adsorption capacity on porous carbon materials at different pressures

Xinzhe Zhu et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Engineering, Environmental

Preparation of nitrogen-doped hierarchical porous carbon materials by a template-free method and application to CO2 capture

Wunengerile Zhang et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Article Engineering, Environmental

Carbon nanotube silica composite hollow fibers impregnated with polyethylenimine for CO2 capture

Laura Keller et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Chemistry, Physical

Concepts for improving hydrogen storage in nanoporous materials

D. P. Broom et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Chemistry, Multidisciplinary

High-Performance Biomass-Derived Activated Porous Biocarbons for Combined Pre- and Post-Combustion CO2 Capture

Gurwinder Singh et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Article Engineering, Environmental

Tunable nitrogen-doped microporous carbons: Delineating the role of optimum pore size for enhanced CO2 adsorption

Adeela Rehman et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Computer Science, Interdisciplinary Applications

Semi-supervised learning to improve generalizability of risk prediction models

Shengqiang Chi et al.

JOURNAL OF BIOMEDICAL INFORMATICS (2019)

Article Chemistry, Applied

Hierarchical porous carbon with optimized mesopore structure and nitrogen doping for supercapacitor electrodes

Guangxu Huang et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2019)

Article Chemistry, Multidisciplinary

Prediction of Carbon Dioxide Adsorption via Deep Learning

Zihao Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Article Engineering, Environmental

The swing adsorption reactor cluster (SARC) for post combustion CO2 capture: Experimental proof-of-principle

Chaitanya Dhoke et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Chemistry, Physical

Energy-based descriptors to rapidly predict hydrogen storage in metal-organic frameworks

Benjamin J. Bucior et al.

MOLECULAR SYSTEMS DESIGN & ENGINEERING (2019)

Review Chemistry, Multidisciplinary

Stability of amine-functionalized CO2 adsorbents: a multifaceted puzzle

Masoud Jahandar Lashaki et al.

CHEMICAL SOCIETY REVIEWS (2019)

Article Engineering, Environmental

Characterization of novel geopolymer - Zeolite composites as solid adsorbents for CO2 capture

M. Minelli et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Article Energy & Fuels

Lignin-derived heteroatom-doped porous carbons for supercapacitor and CO2 capture applications

Muslum Demir et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2018)

Article Engineering, Chemical

Azolla-derived hierarchical nanoporous carbons: From environmental concerns to industrial opportunities

Hosein Banna Motejadded Emrooz et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2018)

Article Chemistry, Applied

Hierarchical porous carbon activated by CaCO3 from pigskin collagen for CO2 and H-2 adsorption

Ang Gao et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2018)

Review Green & Sustainable Science & Technology

Synthesis chemistry of metal-organic frameworks for CO2 capture and conversion for sustainable energy future

Abass A. Olajire

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Article Chemistry, Multidisciplinary

Synthesis of Porous Carbons with High N-Content from Shrimp Shells for Efficient CO2-Capture and Gas Separation

Fangqi Yang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Article Materials Science, Multidisciplinary

Large-surface-area carbons derived from lotus stem waste for efficient CO2 capture

Xing-xing Wu et al.

NEW CARBON MATERIALS (2018)

Article Thermodynamics

Energy audit of Iranian kiwifruit production using intelligent systems

Hamzeh Soltanali et al.

ENERGY (2017)

Article Chemistry, Multidisciplinary

Highly microporous activated carbons from biomass for CO2 capture and effective micropores at different conditions

Jaroslaw Serafin et al.

JOURNAL OF CO2 UTILIZATION (2017)

Article Chemistry, Multidisciplinary

Enhanced CO2 Capture Capacity of Nitrogen-Doped Biomass-Derived Porous Carbons

Jie Chen et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)

Article Chemistry, Physical

Biomass-derived activated carbon with simultaneously enhanced CO2 uptake for both pre and post combustion capture applications

Helena Matabosch Coromina et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Article Energy & Fuels

Biomass derived low-cost microporous adsorbents for efficient CO2 capture

Ganesh K. Parshetti et al.

Article Chemistry, Applied

Prediction of gas storage capacities in metal organic frameworks using artificial neural network

Zeynep Yildiz et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2015)

Article Engineering, Environmental

Nitrogen enriched biochar modified by high temperature CO2-ammonia treatment: Characterization and adsorption of CO2

Xiong Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2014)

Review Chemistry, Multidisciplinary

Recent advances in solid sorbents for CO2 capture and new development trends

Junya Wang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Article Chemistry, Physical

Rapid and Accurate Machine Learning Recognition of High Performing Metal Organic Frameworks for CO2 Capture

Michael Fernandez et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)

Article Chemistry, Physical

A computational study of carbon dioxide adsorption on solid boron

Qiao Sun et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)

Article Energy & Fuels

CO2 Capture with Activated Carbon Grafted by Nitrogenous Functional Groups

Changming Zhang et al.

ENERGY & FUELS (2013)

Article Chemistry, Physical

Nitrogen Doping Effects on the Physical and Chemical Properties of Mesoporous Carbons

Huichao Chen et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2013)

Review Engineering, Industrial

Global sensitivity analysis using polynomial chaos expansions

Bruno Sudret

RELIABILITY ENGINEERING & SYSTEM SAFETY (2008)