☆ 4.3 Article

Experimental investigation of flow and thermal characteristics of synthetic jetissuing from sharp-edged orifices

EXPERIMENTAL HEAT TRANSFER (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Experimental and numerical investigation of the thermal performance of impinging synthetic jets with different waveforms

Pushpanjay K. Singh et al.

Summary: This study experimentally and numerically analyzes the thermal performance of circular synthetic jets using sinusoidal and triangular waveforms. The variables studied include Reynolds number, axial distance, stroke length, and driving frequency. The results show that the triangular waveform synthetic jet has 11% higher heat transfer compared to the sinusoidal waveform. Synthetic jets also exhibit 38.6% higher thermal performance than continuous jets in the far-field region. A correlation for the average Nusselt number is proposed.

EXPERIMENTAL HEAT TRANSFER (2023)

添加到收藏夹

Article Thermodynamics

Experimental investigation of the thermal behavior a single-cavity and multiple-orifice synthetic jet impingement driven by electromagnetic actuator for electronics cooling

Pushpanjay K. Singh et al.

Summary: This experimental study investigates the thermal and flow measurement of multiple-orifice synthetic jet with circular, square, and rectangular orifice shapes. The results show that the average Nusselt number for the multiple-orifice jet is 60% higher compared to single orifice jets. The analysis of the velocity signal's power spectral density provides insights into vortex dynamics.

EXPERIMENTAL HEAT TRANSFER (2022)

添加到收藏夹

Article Thermodynamics

Heat transfer characteristics of flat and concave surfaces by circular and elliptical jet impingement

Jaykumar Joshi et al.

Summary: This paper investigates the thermal behavior of flat and curved surfaces with impinging jets using circular and elliptical nozzles, finding that the stagnation Nusselt number increases with the nozzle aspect ratio for both flat and curved surfaces.

EXPERIMENTAL HEAT TRANSFER (2022)

添加到收藏夹

Article Thermodynamics

Acoustics and Heat Transfer Characteristics of Piezoelectric Driven Central Orifice Synthetic Jet Actuators

Muhammad Ikhlaq et al.

Summary: The study experimentally investigated the heat transfer and noise generation characteristics of two different sizes of Synthetic Jet Actuators (SJAs), finding that the largest SJA outperformed the smallest SJA in terms of heat transfer while operating within acceptable noise levels.

EXPERIMENTAL HEAT TRANSFER (2022)

添加到收藏夹

Article Thermodynamics

An experimental investigation of the flow-field and thermal characteristics of synthetic jet impingement with different waveforms

Pushpanjay K. Singh et al.

Summary: This experimental investigation examines the flow and thermal behavior of electromagnetically actuated circular orifice synthetic jet with sinusoidal and square waveforms. The study focuses on the influence of Reynolds number, dimensionless axial distance, and excitation frequency on the thermal performance. The results show that the average Nusselt number is higher for the synthetic jet with sinusoidal waveform compared to the square waveform. However, in the stagnation region, the square waveform exhibits higher heat transfer. The flow dynamics and velocity profiles explain these variations in heat transfer rate.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Thermodynamics

Methodology for spatially resolved transient convection processes using infrared thermography

Muhammad Ikhlaq et al.

Summary: This study introduces an infrared methodology to analyze transient heat transfer behavior, tested on turbulent impinging jets, showing that variations in jet behavior are reflected in the time to reach steady-state.

EXPERIMENTAL HEAT TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

Experimental and numerical study of flow and heat transfer from a pulsed jet impinging on a pinned surface

Saeed Rakhsha et al.

Summary: The study investigated the effects of pins on flow and heat transfer from pulsating jet impinging on a heated flat surface through experiments and numerical simulations. The results showed that increasing pulse frequency and Reynolds number can enhance heat transfer, while increasing the distance between the jet and target surface can reduce heat transfer.

EXPERIMENTAL HEAT TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

Heat transfer characteristics and boiling heat transfer performance of novel Ag/ZnO hybrid nanofluid using free surface jet impingement

Surendra D. Barewar et al.

Summary: An experimental study was conducted to analyze the heat transfer characteristics of impinging a hybrid nanofluid jet on a heated test surface. The results showed a significant improvement in heat transfer coefficient and boiling performance of the Ag/ZnO hybrid nanofluid under certain conditions.

EXPERIMENTAL HEAT TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

Thermal analysis of jet impingement on hemispherical protrusion on heated surface

Rajesh Maithani et al.

Summary: The study analyzed the heat and friction characteristics of jet impingement on an absorber plate with hemispherical protrusion, utilizing selected geometric parameters to achieve a maximum thermohydraulic performance parameter, with further second law analysis conducted.

EXPERIMENTAL HEAT TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

Experimental investigation on the local heat transfer with an unconfined slot jet impinging on a metal foamed flat plate

Ketan Yogi et al.

Summary: This study measured the local heat transfer coefficient of an unconfined slot air jet impinging on metal foamed flat plates with different pore densities, using a thin metal foil technique. The results showed that a higher pore density in the metal foamed flat plate led to lower augmentation of stagnation and average Nusselt numbers. The stagnation and average Nusselt numbers were found to be highest in the stagnation region and decreased in the streamwise direction.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

添加到收藏夹

Editorial Material Engineering, Chemical

Critical reviews for facilitating innovations and advances in drying science and technology

Shivanand S. Shirkole et al.

DRYING TECHNOLOGY (2021)

添加到收藏夹

Article Thermodynamics

Impingement heat transfer on flat and concave surfaces by piston-driven synthetic jet from planar lobed orifice

Yuan-wei Lyu et al.

Summary: Based on experimental studies, this research investigates the heat transfer characteristics of a single synthetic jet emitted from planar lobed orifices. It is found that the planar lobed orifices enhance heat transfer significantly compared to the baseline round orifice, depending on the shapes of the lobes and targets. The N=6 petal-shaped orifice is identified as the most promising configuration among the petal-shaped orifices, while a moderate lobe aspect ratio is shown to be superior in the arch-shaped orifices.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

An experimental study on heat transfer of different aqueous surfactant solutions horizontal impinging jet using infrared thermography

Mayank Modak et al.

Summary: This study investigates the effect of surface wettability on heat transfer characteristics of impinging jets using infrared thermography. The results demonstrate that enhanced wettability can significantly improve heat transfer efficiency.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

On the effect of orifice thickness and divergence angle in the near and intermediate fields of axisymmetric jets

Tengfei Cai et al.

Summary: In this experimental study, the effects of various axisymmetric orifice geometries on jet characteristics at Reynolds number of approximately 10^5 were explored. The thickness and divergence angle of the orifices were found to impact velocity profiles and mixing rates in the near region, highlighting the influence of geometry on turbulent structures and flow behavior.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2021)

添加到收藏夹

Article Thermodynamics

Experimental investigation on thermal characteristics of hot surface by synthetic jet impingement

Pushpanjay K. Singh et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Heat transfer coefficients during the impingement cooling with the use of synthetic jet

Pawel Gil et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2020)

添加到收藏夹

Article Thermodynamics

Temperature-variation effect of piston-driven synthetic jet and its influence on definition of heat transfer coefficient

Yuan-wei Lyu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Review Thermodynamics

Synthetic jet impingement heat transfer enhancement - A review

Gopal Krishan et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Experimental investigation on thermal and flow characteristics of synthetic jet with multiple-orifice of different shapes

Laxmikant Mangate et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Experimental and numerical investigations on convective heat transfer of dual piezoelectric fans

Li XinJun et al.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2018)

添加到收藏夹

Article Thermodynamics

Effects of the stroke length and nozzle-to-plate distance on synthetic jet impingement heat transfer

Carlo Salvatore Greco et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Article Thermodynamics

Performance and potential energy saving of thermal dryer with intermittent impinging jet

Jundika C. Kurnia et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Heat transfer enhancement of an impinging synthetic air jet using diffusion-shaped orifice

Yao-Hsien Liu et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Performance and efficiency of loudspeaker driven synthetic jet actuator

Pawel Gil et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2016)

添加到收藏夹

Article Thermodynamics

Mixing and entrainment characteristics of a pulse jet

Harekrishna Yadav et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2016)

添加到收藏夹

Article Engineering, Manufacturing

Predicting Heat Transfer for Low- and High-Frequency Central-Orifice Synthetic Jets

Muhammad Ikhlaq et al.

IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2016)

添加到收藏夹

Article Thermodynamics

Effect of driven frequency on flow and heat transfer of an impinging synthetic air jet

Yao-Hsien Liu et al.

APPLIED THERMAL ENGINEERING (2015)

添加到收藏夹

Article Thermodynamics

An experimental investigation on comparison of synthetic and continuous jets impingement heat transfer

Xiao-ming Tan et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

添加到收藏夹

Article Thermodynamics

Impingement heat/mass transfer to hybrid synthetic jets and other reversible pulsating jets

Z. Travnicek et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

添加到收藏夹

Article Thermodynamics

Heat transfer and acoustic study of impinging synthetic jet using diamond and oval shape orifice

Laxmikant D. Mangate et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2015)

添加到收藏夹

Article Thermodynamics

Effect of nozzle shape on jet impingement heat transfer from a circular cylinder

Dushyant Singh et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2015)

添加到收藏夹

Article Thermodynamics

An Experimental Study of Impinging Synthetic Jets for Heat Transfer Augmentation

Omidreza Ghaffari et al.

INTERNATIONAL JOURNAL OF AIR-CONDITIONING AND REFRIGERATION (2015)

添加到收藏夹

Article Thermodynamics

Acoustic and heat transfer characteristics of an impinging elliptical synthetic jet generated by acoustic actuator

Udaysinh S. Bhapkar et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

添加到收藏夹

Article Thermodynamics

Flow and mixing characteristics of pulsed confined opposed jets in turbulent flow regime

Shuxia Qiu et al.

HEAT AND MASS TRANSFER (2013)

添加到收藏夹

Article Thermodynamics

The Effect of Particle Concentration on Cooling of a Circular Horizontal Surface Using Nanofluid Jets

O. Zeitoun et al.

NANOSCALE AND MICROSCALE THERMOPHYSICAL ENGINEERING (2013)

添加到收藏夹

Article Thermodynamics

A study on the heat and mass transfer properties of multiple pulsating impinging jets

Peng Xu et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2012)

添加到收藏夹

Article Thermodynamics

Predicting Heat Transfer From Unsteady Synthetic Jets

Mehmet Arik et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2012)

添加到收藏夹

Review Engineering, Aerospace

The flow field in turbulent round free jets

C. G. Ball et al.

PROGRESS IN AEROSPACE SCIENCES (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Nanofluid impingement jet heat transfer

Obida Zeitoun et al.

NANOSCALE RESEARCH LETTERS (2012)

添加到收藏夹

Article Engineering, Electrical & Electronic

A numerical investigation of effects of cavity and orifice parameters on the characteristics of a synthetic jet flow

Manu Jain et al.

SENSORS AND ACTUATORS A-PHYSICAL (2011)

添加到收藏夹

Article Thermodynamics

Effect of orifice shape in synthetic jet based impingement cooling

Mangesh Chaudhari et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2010)

添加到收藏夹

Article Thermodynamics

Heat transfer characteristics of synthetic jet impingement cooling

Mangesh Chaudhari et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)

添加到收藏夹

Article Thermodynamics

Turbulent impinging jet heat transfer enhancement due to intermittent pulsation

Peng Xu et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2010)

添加到收藏夹

Article Thermodynamics

Frequency response of a synthetic jet cavity

Mangesh Chaudhari et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2009)

添加到收藏夹

Article Thermodynamics

Heat transfer mechanisms in an impinging synthetic jet for a small jet-to-surface spacing

P. Valiorgue et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2009)

添加到收藏夹

Article Engineering, Mechanical

An Experimental and Analytical Investigation of Rectangular Synthetic Jets

Gopi Krishnan et al.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2009)

添加到收藏夹

Article Thermodynamics

Local heat transfer coefficients of a high-frequency synthetic jet during impingement cooling over flat surfaces

Mehmet Arik

HEAT TRANSFER ENGINEERING (2008)

添加到收藏夹

Article Thermodynamics

Local convective heat transfer from a constant heat flux flat plate cooled by synthetic air jets

M. B. Gillespie et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2006)

添加到收藏夹

Article Thermodynamics

Electronic cooling using synthetic jet impingement

Anna Pavlova et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2006)

添加到收藏夹

Article Engineering, Aerospace

Spanwise characteristics of high-aspect-ratio synthetic jets

S. Abdou et al.

AIAA JOURNAL (2006)

添加到收藏夹

Article Mechanics

Upstream nozzle shaping effects on near field flow in round turbulent free jets

WR Quinn

EUROPEAN JOURNAL OF MECHANICS B-FLUIDS (2006)

添加到收藏夹

Article Engineering, Aerospace

Formation criterion for synthetic jets

R Holman et al.

AIAA JOURNAL (2005)

添加到收藏夹

Article Engineering, Aerospace

Control of a miniducted-fan unmanned aerial vehicle using active flow control

PHY Fung et al.

JOURNAL OF AIRCRAFT (2002)

添加到收藏夹

Article Engineering, Aerospace

Separation control in duct flows

M Amitay et al.

JOURNAL OF AIRCRAFT (2002)

添加到收藏夹

Article Engineering, Aerospace

Jet mixing enhancement by high-amplitude fluidic actuation

JB Freund et al.

AIAA JOURNAL (2000)

添加到收藏夹

Article Thermodynamics

Effects of nozzle-inlet chamfering on pressure drop and heat transfer in confined air jet impingement

LA Brignoni et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2000)

添加到收藏夹

Article Thermodynamics

The effect of nozzle configuration on stagnation region heat transfer enhancement of axisymmetric jet impingement

J Lee et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.