☆ 4.7 Article

Effect of cracks on dynamical responses of double-variable-edge plates made of graphene nanoplatelets-reinforced porous matrix and sur-bonded by piezoelectric layers subjected to thermo-mechanical loads

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Aerospace

Dynamic and Chaotic Responses of Porous Nanocomposite Nonrectangular Plates with Single-Variable-Edge

Vu Ngoc Viet Hoang et al.

Summary: This study introduces the dynamical characteristics of functionally graded porous nanocomposite new plates reinforced with graphene platelets. The research derives governing equations using elasticity theory and mechanics of materials, and uses Galerkin's procedure to achieve dynamic and chaotic characteristics of the complex-shaped plates. Comparisons with previous literature and finite element method analyses confirm the accuracy and reliability of the calculating process, showing significant contribution to modern science and technology.

AIAA JOURNAL (2022)

添加到收藏夹

Article Engineering, Civil

On the free vibration behavior of nanocomposite laminated plates contained piece-wise functionally graded graphene-reinforced composite plies

Berkane Saiah et al.

Summary: This study investigates the free vibration behavior of laminated plate structures containing carbon-based nanocomposites plies, focusing on the effect of graphene distribution patterns and lay-up arrangements. The results are compared with previous attempts, showing excellent agreement and providing new design criteria for future nanocomposite structures.

ENGINEERING STRUCTURES (2022)

添加到收藏夹

Article Engineering, Mechanical

Three-dimensional biomechanical modeling of cylindrical bone-like porous materials subject to acoustic waves

M. Hodaei et al.

Summary: This research presents a three-dimensional analytical solution for assessing the acoustic response of cancellous bone-like porous materials saturated with a viscous fluid, taking into account the effect of dynamic tortuosity. The study shows that the incident wave angle significantly affects the radial displacement and scattering operators, exhibiting symmetric or asymmetric distribution patterns in different frequency ranges.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Materials Science, Composites

Heterogeneous silicon rubber composite foam with gradient porous structure for highly absorbed ultra-efficient electromagnetic interference shielding

Jianming Yang et al.

Summary: The composite foam made of heterogeneous silicone rubber/silver plated glass fiber/multiwalled carbon nanotubes/ferroferric oxide has high EMI shielding effectiveness and absorption coefficient, with stable performance under multiple bending. It is suitable for applications in wearable flexible electronics, high-power instruments, and upcoming 5th-Generation communication products.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Civil

On the free vibration and bending analysis of functionally graded nanocomposite spherical shells reinforced with graphene nanoplatelets: Three-dimensional elasticity solutions

Dongying Liu et al.

Summary: This study presents analytical investigations on the free vibration and static bending of functionally graded graphene-reinforced nanocomposite spherical shells using different distribution patterns and the layer-wise model for analytical solutions.

ENGINEERING STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

Buckling and free vibration analyses of a sandwich beam made of a soft core with FG-GNPs reinforced composite face-sheets using Ritz Method

Mohammad Arefi et al.

Summary: This paper investigates buckling and free vibration analyses of a sandwich beam composed of functionally graded graphene nanoplatelets reinforced composite face sheets. Kinematic relations are developed based on Extended Higher-Order Sandwich Beam Theory and governing equations are derived using Ritz-Lagrange formulation. Effective mechanical properties of the composites are obtained from micro-mechanical models and the Ritz Method is used to obtain numerical results.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Mechanics

Nonlinear vibration analysis of a cantilever beam with multiple breathing edge cracks

Masoud Kharazan et al.

Summary: The study investigates the nonlinear vibration behavior of a cantilever beam with multiple breathing cracks, with calculations of stiffness, evaluation of damping variation, and simulation of bilinear behavior using a polynomial function. Results show that beams with a higher number of cracks or deeper ones exhibit obvious softening behavior, leading to a more significant jumping in the response.

INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS (2021)

添加到收藏夹

Article Mechanics

Isogeometric analysis for postbuckling of sandwich cylindrical shell panels with graphene platelet reinforced functionally graded porous core

Chang Tao et al.

Summary: This study investigates the postbuckling behavior of sandwich cylindrical shell panels with a graphene platelet reinforced functionally graded porous core under various loads for the first time. Utilizing a combination of NURBS-based isogeometric analysis and the modified arc-length method, the study demonstrates nonlinear load-deflection responses and captures different types of instability. Parametric studies show the influences of various factors on the load-deflection behavior of the panels.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Marine

Numerical analysis on wave load reduction effect of a solid wall with porous plate by macroscopic CFD approach

Dongsheng Qiao et al.

Summary: The study found that porosity and relative gap width are the main factors affecting the reduction of wave forces, while the wave load reduction coefficient and reflection coefficient do not show linear relationships. The optimal geometry parameters are porosity of 0.2 and relative gap width of 0.2-0.3.

OCEAN ENGINEERING (2021)

添加到收藏夹

Article Acoustics

Numerical investigation of leading edge noise reduction on a rod-airfoil configuration using porous materials and serrations

Christopher Teruna et al.

Summary: A lattice-Boltzmann method was used to study aeroacoustics and aerodynamics of airfoils with different leading edge treatments, finding that porous leading edge reduces noise by decreasing blockage effect, while leading edge serrations promote destructive interference of noise sources along the span. Both treatments have similar effects on broadband noise reduction, but serrations perform better when applied against inflow with tonal characteristic.

JOURNAL OF SOUND AND VIBRATION (2021)

添加到收藏夹

Article Engineering, Civil

The effect of cracks and thermal environment on free vibration of FGM plates

Phuc Pham Minh et al.

Summary: This paper studies the free vibration parameters of cracked functionally graded material plates with nonlinear varying thickness according to a symmetric parabola function under temperature. Formulas were developed based on Shi's third-order shear deformation theory and the phase field theory in destructive mechanics, and the results were compared with existing literature. Various parameters like crack length, crack angle, plate length ratio, temperature, volume fraction index, and boundary conditions were considered in calculating the free vibration frequencies of the plates, along with the effects of plate edges and symmetrical parabolic thickness shapes on the natural frequencies of FGM plates.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Engineering, Aerospace

Thermal buckling analysis of FG graphene nanoplatelets reinforced porous nanocomposite MCST-based annular/circular microplates

Ehsan Arshid et al.

Summary: This study presents thermal buckling analysis of annular/circular microplates made from functionally graded Graphene nanoplatelets (GNPs) reinforced porous nanocomposite. Increasing the weight fraction of GNPs reduces buckling results, while increasing the porosity coefficient improves thermal buckling behavior. These findings can serve as a benchmark for future studies.

AEROSPACE SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Mechanics

Gradually perforated porous materials backed with Helmholtz resonant cavity for broadband low-frequency sound absorption

Xuewei Liu et al.

Summary: The study introduces a novel sound absorber that combines low-frequency and broadband absorption functions by using gradually perforated porous materials and a Helmholtz resonant cavity. Theoretical and finite element models were developed to analyze the sound absorption mechanisms and factors influencing performance.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Materials Science, Composites

Fracture angle prediction for matrix failure of carbon-fiber-reinforced polymer using energy method

Chunlei Song et al.

Summary: In this study, an energy-based model was developed to predict the fracture angle of matrix failure in CFRP under three-dimensional mechanical loading. The effect of stress state in the damaged area on energy density was analyzed, and the predicted fracture angle was verified by comparison with existing strength-based matrix failure criteria. The computational efficiency between energy-based and strength-based failure criteria was compared and evaluated.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Civil

Influence of porosity distribution on static and buckling responses of porous functionally graded plates

Mohit Dhuria et al.

Summary: This study investigates the effect of porosity distribution on static and buckling responses of an FG porous plate, revealing that inverse hyperbolic shear deformation theory eliminates the need for shear correction factors while accounting for non-linear variations. The use of power-law to describe material properties variation shows significant influence of porosity parameter, power-law exponent, and other factors on plate response.

STRUCTURES (2021)

添加到收藏夹

Article Thermodynamics

Forced vibration characteristics of embedded graphene oxide powder reinforced metal foam nanocomposite plate in thermal environment

Jie Zheng et al.

Summary: This study presents the dynamic behavior of a new nanocomposite material composed of metal foam as matrix and graphene oxide powders as reinforcement under forced vibration. The results indicate that the vibrational response is significantly influenced by parameters such as weight fraction of graphene oxide powders, porosity distributions, foundation parameters, and temperature change.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Engineering, Mechanical

Size-dependent postbuckling analysis of graphene reinforced composite microtubes with geometrical imperfection

Lu Lu et al.

Summary: Graphene reinforced composites have shown remarkable mechanical properties, and this study focuses on the size-dependent postbuckling behavior of functionally graded graphene platelets reinforced composite microtubes. Different distribution patterns of graphene reinforcements were considered, and it was found that the microstructure effect is significant when the outer radius of the microtube is comparable to the material length scale parameter. The study provides theoretical guidelines for optimal design and safety assessment of graphene reinforced composite tubular structures.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Mechanical

Buckling analysis of cracked orthotropic 3D plates and shells via an isogeometric-reproducing kernel particle method

Raj Kiran et al.

Summary: This paper introduces an IGA-RKPM coupling approach to study the buckling behavior of cracked isotropic and orthotropic plate and shell structures. The approach successfully overcomes the barrier of global parameterization, preserves geometry exactness, and offers a higher-order approximation based on IGA basis functions with local refinement flexibility. By comparing results with existing literature, the efficacy and robustness of the proposed coupling approach have been demonstrated.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)

添加到收藏夹

Review Physics, Multidisciplinary

The recent progress of functionally graded CNT reinforced composites and structures

Kim Meow Liew et al.

SCIENCE CHINA-PHYSICS MECHANICS & ASTRONOMY (2020)

添加到收藏夹

Article Engineering, Aerospace

Probabilistic stability analysis of functionally graded graphene reinforced porous beams

Kang Gao et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Acoustics

Characterization of noise reduction capabilities of porous materials under various vacuum conditions

Kai Huang et al.

APPLIED ACOUSTICS (2020)

添加到收藏夹

Article Mechanics

Three-dimensional thermoelasticity analysis of graphene platelets reinforced cylindrical panel

A. Alibeigloo

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2020)

添加到收藏夹

Article Mechanics

A three -variable high order shear deformation theory for isogeometric free vibration, buckling and instability analysis of FG porous plates reinforced by graphene platelets

Quang Huan Nguyen et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Mechanics

Advanced reproducing kernel meshfree modeling of cracked curved shells for mixed-mode stress resultant intensity factors

Ming-Jyun Dai et al.

ENGINEERING FRACTURE MECHANICS (2020)

添加到收藏夹

Article Engineering, Mechanical

Static and dynamic fracture analysis of 3D cracked orthotropic shells using XFEM method

H. Zarrinzadeh et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)

添加到收藏夹

Article Engineering, Civil

Wave propagation and vibration responses in porous smart nanocomposite sandwich beam resting on Kerr foundation considering structural damping

Behrooz Keshtegar et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

On vibration and stability analysis of porous plates reinforced by graphene platelets under aerodynamical loading

Ali Reza Saidi et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Engineering, Mechanical

Analytical solution for free vibration of cracked orthotropic cylindrical shells

Hamed Saeidi Googarchin et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

The effect of cracks on the stability of the functionally graded plates with variable-thickness using HSDT and phase-field theory

Phuc Pham Minh et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Modeling geometrically nonlinear large deformation behaviors of matrix cracked hybrid composite deep shells containing CNTRC layers

Z. Z. Pan et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Modeling large amplitude vibration of matrix cracked hybrid laminated plates containing CNTR-FG layers

Z. X. Lei et al.

APPLIED MATHEMATICAL MODELLING (2018)

添加到收藏夹

Article Mechanics

Thermomechanical Extended Layerwise Method for laminated composite plates with multiple delaminations and transverse cracks

D. H. Li et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Vibration characteristics of functionally graded graphene reinforced porous nanocomposite cylindrical shells with spinning motion

Y. H. Dong et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Bending and buckling analyses of functionally graded polymer composite plates reinforced with graphene nanoplatelets

Mitao Song et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Engineering, Mechanical

Low-velocity impact response of FG-GRC laminated beams resting on visco-elastic foundations

Yin Fan et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

添加到收藏夹

Article Engineering, Civil

The stability of cracked rectangular plate with variable thickness using phase field method

Phuc Pham Minh et al.

THIN-WALLED STRUCTURES (2018)

添加到收藏夹

Article Engineering, Mechanical

Nonlocal scale effect on Rayleigh wave propagation in porous fluid-saturated materials

L. H. Tong et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

Mechanical properties of graphene and graphene-based nanocomposites

Dimitrios G. Papageorgiou et al.

PROGRESS IN MATERIALS SCIENCE (2017)

添加到收藏夹

Article Materials Science, Composites

Nonlinear vibration and postbuckling of functionally graded graphene reinforced porous nanocomposite beams

Da Chen et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2017)

添加到收藏夹

Article Mechanics

Thermal postbuckling and vibration of postbuckled matrix cracked hybrid laminated plates containing carbon nanotube reinforced composite layers on elastic foundation

Yin Fan et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Analytical solution for nonlinear postbuckling of functionally graded carbon nanotube-reinforced composite shells with piezoelectric layers

R. Ansari et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Mechanics

Mechanical analysis of functionally graded carbon nanotube reinforced composites: A review

K. M. Liew et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Mechanics

Analytical modelling for vibration analysis of partially cracked orthotropic rectangular plates

P. V. Joshi et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2015)

添加到收藏夹

Article Acoustics

Analytical modeling for vibration analysis of thin rectangular orthotropic/functionally graded plates with an internal crack

P. V. Joshi et al.

JOURNAL OF SOUND AND VIBRATION (2015)

添加到收藏夹

Article Engineering, Mechanical

Buckling of cracked functionally graded plates supported by Pasternak foundation

Danial Panahandeh-Shahraki et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2014)

添加到收藏夹

Article Engineering, Civil

Buckling of cracked functionally graded plates under tension

Ahmad Amiri Rad et al.

THIN-WALLED STRUCTURES (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Vibration of single-layered graphene sheet-based nanomechanical sensor via nonlocal Kirchhoff plate theory

Zhi-Bin Shen et al.

COMPUTATIONAL MATERIALS SCIENCE (2012)

添加到收藏夹

Article Engineering, Multidisciplinary

A phase-field description of dynamic brittle fracture

Michael J. Borden et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermal properties of graphene: Fundamentals and applications

Eric Pop et al.

MRS BULLETIN (2012)

添加到收藏夹

Article Chemistry, Physical

Production, properties and potential of graphene

Caterina Soldano et al.

CARBON (2010)

添加到收藏夹

Article Materials Science, Composites

Finite fracture mechanics analysis of crack onset at a stress concentration in a UD glass/epoxy composite in off-axis tension

J. Andersons et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2010)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enhanced Mechanical Properties of Nanocomposites at Low Graphene Content

Mohammad A. Rafiee et al.

ACS NANO (2009)

添加到收藏夹

Review Physics, Multidisciplinary

The electronic properties of graphene

A. H. Castro Neto et al.

REVIEWS OF MODERN PHYSICS (2009)

添加到收藏夹

Article Multidisciplinary Sciences

Measurement of the elastic properties and intrinsic strength of monolayer graphene

Changgu Lee et al.

SCIENCE (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.