☆ 4.6 Article

Shape effects of TEG mounted ventilated cavities with alumina-water nanofluids on the performance features by using artificial neural networks

ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Prospects of Thermoelectric Generators with Nanofluid

Mohammad Ali Abdelkareem et al.

Summary: This article discusses the unique utilization of nanofluids in thermoelectric generator (TEG) applications, specifically in waste heat recovery. Nanofluids have been shown to significantly improve heat transfer efficiency and enhance TEG performance. However, further research and development are needed to achieve commercialization of TEG systems.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2022)

添加到收藏夹

Article Energy & Fuels

Energy performance investigation of nanofluid-based concentrated photovoltaic / thermal-thermoelectric generator hybrid system

Abdelhak Lekbir et al.

Summary: The study explored the use of nanofluid in a CPV/T solar collector to enhance electrical and thermal performance, and found that the nanofluid-based system outperformed traditional cooling methods. Specifically, the nanofluid-based NCPV/T-TEG configuration exhibited significantly higher electrical performance compared to standard PV modules, CPV/TEG, and WCPV/T-TEG configurations. Additionally, the NCPV/T-TEG system showed an overall thermal energy increase compared to the water-cooled system. The results suggest that the NCPV/T-TEG hybrid system has the potential for further development in high-concentration solar systems.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Performance assessment of a thermoelectric module by using rotating circular cylinders and nanofluids in the channel flow for renewable energy applications

Fatih Selimefendigil et al.

Summary: The study showed that using rotating cylinders in the channel can enhance the power of the TEG module. A higher number of cylinders provide greater power enhancements in the module, and the inclusion of nanoparticles can effectively improve TEG power when the system performance is low.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Energy & Fuels

A Machine Learning Approach to Predicting the Heat Convection and Thermodynamics of an External Flow of Hybrid Nanofluid

Rasool Alizadeh et al.

Summary: This study numerically analyzed the heat convection and entropy generation in a hybrid nanofluid flowing around a cylinder embedded in porous media. The research found that the heat transfer of the system increases with higher Reynolds number, permeability parameter, or volume fraction of nanoparticles, while increasing nanoparticle concentration has a nonmonotonic effect on entropy generation. The study demonstrates the capability of artificial intelligence algorithms in predicting the thermohydraulics and thermodynamics of thermal and solutal systems.

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2021)

添加到收藏夹

Article Thermodynamics

Thermoelectric generation from vented cavities with a rotating conic object and highly conductive CNT nanofluids for renewable energy systems

Fatih Selimefendigil et al.

Summary: This study investigates thermoelectric power generation using a rotating conic object and carbon-nanotube particles in a cavity with ventilation ports. Factors such as rotational speed, object size, and nanoparticle volume fraction significantly affect power generation. A predictive model based on fluid flow Reynolds numbers and rotational Reynolds number delivers accurate predictions for power output.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

Mixed convection flow of hybrid nanofluid through a vented enclosure with an inner rotating cylinder

Laith M. Jasim et al.

Summary: This study presents a numerical solution for the influence of an inner rotating adiabatic cylinder on mixed convection of hybrid nanofluid inside a vented cavity. The study explores the effects of various parameters on energy transport and presents the results through qualitative and quantitative figures.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Engineering, Mechanical

Performance of TEG integrated channel with area expansion by using advanced passive techniques

Fatih Selimefendigil et al.

Summary: This study investigated the impact of flow separation on the power generation and conversion efficiency of a thermoelectric generator integrated channel flow with area expansion through numerical simulations. Results showed that using an eccentric conic object near the thermoelectric device and adding hybrid nano-sized particles in the heat transfer fluid can enhance system performance. Different parameters such as Reynolds number, expansion ratio, aspect ratio, location and size of the eccentric cone, and solid nanoparticle volume fraction were studied to understand their effects on fluid flow and power generation characteristics. The study also revealed that changing the object location is more favorable than increasing the size and aspect ratio of the cone for power generation, conversion efficiency, and pressure drop features.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Chemical

Impacts of elasticity and porosity of the channels on the performance features of thermoelectric module mounted system and efficient computations with multi-proper orthogonal decomposition approach

Fatih Selimefendigil et al.

Summary: The presence of elastic walls has a slight impact on power variation, while the presence of a porous layer alters power generation features significantly. Increasing the permeability and height of the porous layer results in higher thermoelectric power generation, with the highest increment amounts being 32% for the highest permeability and 17% for the highest porous layer height. The length of the porous layer in the flow direction has a slight impact on power generation, while introducing nano-sized particles further enhances power generation.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2021)

添加到收藏夹

Article Engineering, Chemical

A machine learning approach to the prediction of transport and thermodynamic processes in multiphysics systems-heat transfer in a hybrid nanofluid flow in porous media

Rasool Alizadeh et al.

Summary: This paper presents a novel approach based on machine learning techniques for predicting transport behaviors of complex multiphysics systems, resulting in significant reductions in computational time and cost. The study focuses on a hybrid nanofluid flow over a blunt object in porous media, including mixed convection, entropy generation, local thermal non-equilibrium, and nonlinear thermal radiation. The SVR model is used to approximate various functions, while the PSO meta-heuristic algorithm is applied for proposing correlations, allowing for quantitative evaluation of variables' contributions.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2021)

添加到收藏夹

Article Thermodynamics

Numerical investigation and comparative analysis of nanofluid cooling enhancement for TEG and TEC systems

He Ruan et al.

Summary: In this study, a fluid-thermalelectric multiphysics coupled model is developed to investigate the enhancement effects of graphene nanoplatelets (GNPs) nanofluids on both thermoelectric generator (TEG) and thermoelectric cooler (TEC) systems. The research found that the performance improvements increase significantly with higher nanoparticle concentrations but decrease as Reynolds number decreases.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Investigation of heat transfer enhancement of Cu-water nanofluid by different configurations of double rotating cylinders in a vented cavity with different inlet and outlet ports

Hesam Moayedi

Summary: This study examines the influence of various factors on heat transfer characteristics of rotating cylinders in a cavity with the presence of Cu water nanofluid. Results show that increasing nanofluid volume fraction and rotational Reynolds number lead to improved heat transfer efficiency. Among the configurations, Configuration C with specific inlet and outlet ports demonstrates the highest heat transfer enhancement, while Configuration C with a different set of inlet and outlet ports shows better performance in overall PEC criteria for both cylinders.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Engineering, Environmental

Prediction of the spread of Corona-virus carrying droplets in a bus-A computational based artificial intelligence approach

Mehrdad Mesgarpour et al.

Summary: This study proposes a novel computational and AI framework to predict the spread of droplets produced by a sneezing passenger on a bus, showing that droplets smaller than 250 micrometers are most responsible for virus transmission in the bus environment.

JOURNAL OF HAZARDOUS MATERIALS (2021)

添加到收藏夹

Review Chemistry, Physical

Recent advances in using nanofluids in renewable energy systems and the environmental implications of their uptake

Omid Mahian et al.

Summary: Nanofluids, mixtures of common liquids and solid nanoparticles with enhanced thermal and optical properties, have been studied for over two decades despite barriers to commercial adoption. Research has focused on the effects of adding nanoparticles on the thermal efficiency and emission reductions in renewable energy systems, particularly in solar systems.

NANO ENERGY (2021)

添加到收藏夹

Article Engineering, Chemical

Analysis of the Performance of a Solar Thermoelectric Generator for Variable Leg Geometry with Nanofluid Cooling

Cristian Francisco Ramos-Castaneda et al.

Summary: This study investigated the impact of nanofluid use in solar-thermoelectric generators through analysis and simulation, finding that using GNAN coolant can enhance the performance and output power of Solar-TEG systems.

PROCESSES (2021)

添加到收藏夹

Review Physics, Multidisciplinary

A review of recent advances in thermophysical properties at the nanoscale: From solid state to colloids

Lin Qiu et al.

PHYSICS REPORTS-REVIEW SECTION OF PHYSICS LETTERS (2020)

添加到收藏夹

Article Energy & Fuels

Application of Machine Learning to Investigation of Heat and Mass Transfer Over a Cylinder Surrounded by Porous Media-The Radial Basic Function Network

Rasool Alizadeh et al.

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2020)

添加到收藏夹

Article Thermodynamics

Semi-3D transient simulation of a nanofluid-base photovoltaic thermal system integrated with a thermoelectric generator

Arman Kolahan et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

添加到收藏夹

Review Engineering, Chemical

A Review on the Control Parameters of Natural Convection in Different Shaped Cavities with and without Nanofluid

Sara Rostami et al.

PROCESSES (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Identification of pulsating flow effects with CNT nanoparticles on the performance enhancements of thermoelectric generator (TEG) module in renewable energy applications

Fatih Selimefendigil et al.

RENEWABLE ENERGY (2020)

添加到收藏夹

Article Engineering, Mechanical

Fluid-solid interaction of elastic-step type corrugation effects on the mixed convection of nanofluid in a vented cavity with magnetic field

Fatih Selimefendigil et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

添加到收藏夹

Article Physics, Multidisciplinary

Assessment of thermal conductivity enhancement of nano-antifreeze containing single-walled carbon nanotubes: Optimal artificial neural network and curve-fitting

Alireza Moradikazerouni et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2019)

添加到收藏夹

Review Energy & Fuels

Evaluation of solar thermal system configurations for thermoelectric generator applications: A critical review

Krishnadass Karthick et al.

SOLAR ENERGY (2019)

添加到收藏夹

Review Acoustics

Effect of sonication characteristics on stability, thermophysical properties, and heat transfer of nanofluids: A comprehensive review

Amin Asadi et al.

ULTRASONICS SONOCHEMISTRY (2019)

添加到收藏夹

Article Thermodynamics

Effects of temperature-dependent properties on natural convection of power-law nanofluids in rectangular cavities with sinusoidal temperature distribution

Lei Wang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Review Green & Sustainable Science & Technology

A review of solar collectors using carbon-based nanofluids

Adeola Borode et al.

JOURNAL OF CLEANER PRODUCTION (2019)

添加到收藏夹

Article Thermodynamics

Al/oil nanofluids inside annular tube: an experimental study on convective heat transfer and pressure drop

Amin Jafarimoghaddam et al.

HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Article Thermodynamics

Development of a numerical method for the performance analysis of thermoelectric generators with thermal and electric contact resistance

Chang Nyung Kim

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Review Engineering, Chemical

Evaluating the effects of different parameters on rheological behavior of nanofluids: A comprehensive review

Afshin Ahmadi Nadooshan et al.

POWDER TECHNOLOGY (2018)

添加到收藏夹

Review Green & Sustainable Science & Technology

Thermoelectric materials and heat exchangers for power generation - A review

Dipak S. Patil et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Experimental analysis and dynamic modeling of a photovoltaic module with porous fins

Fatih Selimefendigil et al.

RENEWABLE ENERGY (2018)

添加到收藏夹

Review Thermodynamics

A comprehensive review on rheological behavior of mono and hybrid nanofluids: Effective parameters and predictive correlations

Hossein Khodadadi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Review Thermodynamics

Studies on natural convection within enclosures of various (non-square) shapes - A review

Debayan Das et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Article Thermodynamics

Experimental investigation of heat transfer and pressure drop in a straight minichannel heat sink using TiO2 nanofluid

Waqas Arshad et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Article Thermodynamics

On the Performance of Ag/Oil Nanofluids in Heat Transfer Enhancement in a Sinusoidal Tube: Constant Heat Flux Boundary Condition

Amin Jafarimoghaddam et al.

HEAT TRANSFER-ASIAN RESEARCH (2017)

添加到收藏夹

Article Thermodynamics

Experimental investigation of convective heat transfer augmentation for car radiator using ZnO-water nanofluids

Hafiz Muhammad Ali et al.

ENERGY (2015)

添加到收藏夹

Article Thermodynamics

Forced convection of ferrofluids in a vented cavity with a rotating cylinder

Fatih Selimefendigil et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2014)

添加到收藏夹

Article Physics, Condensed Matter

Significant lattice thermal conductivity reduction following phase separation of the highly efficient GexPb1-xTe thermoelectric alloys

Yaniv Gelbstein et al.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2014)

添加到收藏夹

Article Thermodynamics

Mixed convection heat transfer in a ventilated cavity with hot obstacle: Effect of nanofluid and outlet port location

A. Abouei Mehrizi et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2012)

添加到收藏夹

Article Thermodynamics

Empirical correlating equations for predicting the effective thermal conductivity and dynamic viscosity of nanofluids

Massimo Corcione

ENERGY CONVERSION AND MANAGEMENT (2011)

添加到收藏夹

Article Thermodynamics

Heat transfer enhancement of mixed convection in a square cavity with inlet and outlet ports due to oscillation of incoming flow

E. Sourtiji et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2011)

添加到收藏夹

Article Engineering, Electrical & Electronic

Pb1-xSnxTe Alloys: Application Considerations

Yaniv Gelbstein

JOURNAL OF ELECTRONIC MATERIALS (2011)

添加到收藏夹

Article Thermodynamics

MIXED CONVECTION HEAT TRANSFER OF AIR INSIDE A SQUARE VENTED CAVITY WITH A HEATED HORIZONTAL SQUARE CYLINDER

Ali J. Chamkha et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2011)

添加到收藏夹

Article Thermodynamics

Pulsating flow and convective heat transfer in a cavity with inlet and outlet sections

A. Velazquez et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)

添加到收藏夹

Article Thermodynamics

Prediction of flow fields and temperature distributions due to natural convection in a triangular enclosure using Adaptive-Network-Based Fuzzy Inference System (ANFIS) and Artificial Neural Network (ANN)

Yasin Varol et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2007)

添加到收藏夹

Article Thermodynamics

Heat transfer analysis for shell-and-tube heat exchangers with experimental data by artificial neural networks approach

G. N. Xie et al.

APPLIED THERMAL ENGINEERING (2007)

添加到收藏夹

Article Thermodynamics

Transient flow and heat transfer leading to periodic state in a cavity with inlet and outlet ports due to incoming flow oscillation

S. M. Saeldi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)

添加到收藏夹

Article Thermodynamics

Forced convection in a square cavity with inlet and outlet ports

SM Saeidi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)

添加到收藏夹

Article Energy & Fuels

Prediction of flat-plate collector performance parameters using artificial neural networks

SA Kalogirou

SOLAR ENERGY (2006)

添加到收藏夹

Article Mechanics

Mixed convection in a vented enclosure with an isothermal vertical surface

D Angirasa

FLUID DYNAMICS RESEARCH (2000)

添加到收藏夹

Article Energy & Fuels

Applications of artificial neural-networks for energy systems

SA Kalogirou

APPLIED ENERGY (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.