4.7 Article

Effect of injection timing on combustion, emission and particle morphology of an old diesel engine fueled with ternary blends at low idling operations

期刊

ENERGY
卷 253, 期 -, 页码 -

出版社

PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.energy.2022.124150

关键词

Injection timing; Particle morphology; Ternary blend; Idling emissions; Old vehicle emissions

资金

  1. Basic Science Research Program through the National Research Foundation of Korea (NRF) - Ministry of Education [2019R1I1A1A01057727, 2021R1I1A3056655]
  2. National Research Foundation of Korea [2021R1I1A3056655] Funding Source: Korea Institute of Science & Technology Information (KISTI), National Science & Technology Information Service (NTIS)

向作者/读者索取更多资源

This study investigates the combustion, engine performance, and emission characteristics of an old diesel engine fueled with DPE ternary blended fuels under low idling conditions. The results show that increasing ethanol concentrations in DPE blends lead to increased fuel consumption and HC emissions, while reducing NOx and smoke emissions.
Currently, idling emissions and old vehicle emissions have attracted more and more attention. Many countries have made corresponding policies to limit these emissions. In this study, to investigate the combustion, engine performance, and emission characteristics of an old diesel engine fueled with diesel palm biodiesel-ethanol (DPE) ternary blended fuels according to various multiple injection strategies under low idling conditions, a series of experiments were carried out on an old common-rail direct injection (CRDI) diesel engine. The engine speed and load were fixed at 750 rpm (the lowest speed) and 30 Nm, respectively. Two test modes of A (only pilot injection timing was variable) and B (only main injection timing was variable) were comparative studied. The experimental results show that the main pilot injection timings and DPE ternary blends have significant impacts on the engine performance, combustion and characteristics. Overall, as the ethanol concentrations in DPE ternary blends increase, brake specific fuel consumption (BSFC), maximum heat release rate (HRRmax), ignition delay, carbon monoxide (CO) and hydrocarbon (HC) emissions increase, while nitrogen oxides (NOx) and smoke emissions are simultaneously reduced. The high volatility, high latent heat of evaporation and high oxygen content of ethanol may play a major role in reducing NOx and smoke emissions. In addition, the primary particle diameter of all tested fuels is distributed in a narrow range of 18-24 nm, and the addition of ethanol is beneficial to reduce the particle diameter. (c) 2022 Elsevier Ltd. All rights reserved.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.7
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据