4.6 Article

Surface optimized P2-Na2/3Ni1/3Mn2/3O2 cathode material via conductive Al-doped ZnO for boosting sodium storage

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

Unusual Site-Selective Doping in Layered Cathode Strengthens Electrostatic Cohesion of Alkali-Metal Layer for Practicable Sodium-Ion Full Cell

Bo Peng et al.

Summary: The P2-type Na0.67Ni0.33Mn0.67O2 cathode material achieves stable cycling and moisture resistancy at a higher voltage through dual-site doping with Cu ion and unusual Zn ion. This unique dual-site-doped cathode exhibits excellent cyclic performance and capacity retention at high rates, demonstrating its potential for practical applications.

ADVANCED MATERIALS (2022)

Article Electrochemistry

Unveiling Zn substitution and carbon nanotubes enwrapping in Na3V2(PO4)3 with high performance for sodium ion batteries: Experimental and theoretical study

Tianyue Tong et al.

Summary: By doping Zn2+ ions and encapsulating carbon nanotubes, the conductivity and ion diffusion rate of Na3V2(PO4)(3) material have been significantly improved, making it a promising cathode material for sodium-ion batteries.

ELECTROCHIMICA ACTA (2022)

Article Chemistry, Inorganic & Nuclear

From coating to doping: Effect of post-annealing temperature on the alumina coating of LiNi0.5Mn1.5O4 cathode material

Shuaipeng Yan et al.

Summary: The uniform and thin coating layer of Al(OH)3 on the surface of spinel LiNi0.5Mn1.5O4, achieved through control of feeding sequence and rate, after post-annealing treatment at 600 degrees C exhibits optimal rate and cycling performances due to the synergistic effect of Al2O3 surface coating and doping. This approach enhances the interfacial and structural stability of LiNi0.5Mn1.5O4 material by avoiding direct contact with electrolyte, capturing corrosive HF, increasing oxygen vacancy on particle surface, eliminating impurity phases, reducing Mn3+ content, strengthening the spinel structure, and facilitating Li+ ions diffusion.

JOURNAL OF SOLID STATE CHEMISTRY (2022)

Article Electrochemistry

Enhancement structural stability of LiNi0.8Co0.1Mn0.1O2 via S2- doping combine with Li2SO4 coating co-modification

You-qi Chu et al.

Summary: To address the rapid capacity fade of Ni-rich cathode during charging and discharging, the researchers synthesized a stable and high capacity retention LiNi0.8Co0.1Mn0.1O2 by one-step co-modification. The co-modification involved S-2 doping and Li2SO4 coating, which consumed impurities and improved the stability of the surface and bulk structures.

ELECTROCHIMICA ACTA (2022)

Article Electrochemistry

SnO2 nanosheets grown on in-situ formed N-doped branched TiO2/C nanofibers as binder-free anodes for sodium-ion storage

Ling Wang et al.

Summary: A hybrid structure consisting of SnO2 nanosheets grown on N-doped branched TiO2/C nanofibers (NBT/C@SnO2 NFs) has been designed to address the challenges of low conductivity and large volume expansion of SnO2 as an anode material for sodium-ion storage. This design improves the conductivity and structural stability of the electrode, provides space for volume expansion, and accelerates the transfer rate of electrons and ions, leading to enhanced electrochemical performance. The electrode exhibits outstanding cycling stability and high discharge capacity even at a high current density, making it a promising candidate for high-performance battery systems.

ELECTROCHIMICA ACTA (2022)

Review Chemistry, Physical

The Layered Oxides in Lithium and Sodium-Ion Batteries: A Solid-State Chemistry Approach

Claude Delmas et al.

Summary: This paper provides an overview of research on lithium and sodium layered materials as positive electrodes in lithium (sodium)-ion batteries, focusing on the solid-state chemistry's role in discovering new materials and optimizing properties for different applications. Layered structures, especially lithium-based ones, are considered as the best candidates for high energy density batteries for mobile applications. Through high-temperature solid-state chemistry, many substituted phases have been obtained to stabilize the layered structure and increase the specific capacity.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Multiple effects of Mg1-xNixO coating on P2-type Na0.67Ni0.33Mn0.67O2 to generate highly stable cathodes for sodium-ion batteries

Hyeongwoo Kim et al.

Summary: P2-type NaNiMnO2 (NNMO) is a high-energy and high-voltage cathode material in sodium-ion batteries, but surface degradation effects limit its electrochemical stability. By applying Mg1-xNixO (MgNiO) as a coating, cycling stability and rate capability of NNMO can be significantly improved.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Physical

Surface modification of nano Na[Ni0.60Mn0.35Co0.05]O2 cathode material by dextran functionalized RGO via hydrothermal treatment for high performance sodium batteries

Raghvendra Mishra et al.

Summary: Functionalization of graphene oxide and chemical attachment with transition metal oxide result in the successful preparation of NMC-Dx-RGO composite with high discharge capacity and cycling performance.

APPLIED SURFACE SCIENCE (2021)

Review Chemistry, Multidisciplinary

Promises and Challenges of Next-Generation Beyond Li-ion Batteries for Electric Vehicles and Grid Decarbonization

Yaosen Tian et al.

Summary: The significant advancements in performance and cost of lithium-ion batteries have made them the preferred technology for electrical energy storage, but they may not meet all the requirements for large-scale applications. Hence, exploration of beyond lithium-ion technologies including sodium-ion batteries, potassium-ion batteries, all-solid-state batteries, and multivalent batteries is accelerating.

CHEMICAL REVIEWS (2021)

Article Chemistry, Physical

Ultrathin MgO coating on fabricated O3-NaNi0.45Mn0.3Ti0.2Zr0.05O2 composite cathode via magnetron sputtering for enhanced kinetic and durable sodium-ion batteries

Mingzhe Leng et al.

Summary: An innovative and convenient method has been developed to stabilize the surface of O3-type NaNi0.45Mn0.3Ti0.2Zr0.05O2 composite electrode using an ultrathin MgO film. The MgO-coated cathode shows superior surface stability and capacity retention under high rate conditions, with three main mechanisms discovered to enhance electrochemical performance.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Multidisciplinary

P3/O3 Integrated Layered Oxide as High-Power and Long-Life Cathode toward Na-Ion Batteries

Si-Yuan Zhang et al.

Summary: A newly developed P3/O3 hybrid cathode material with excellent high-rate performance and cycling stability is demonstrated by adjusting the Ti substitution amount in Na2/3Ni1/3Mn2/3-xTixO2. The co-existence of P3 and O3 phases and the superior electrochemical properties of the biphasic cathode indicate the significant role of P3/O3 hybridization in designing and engineering layered oxide cathodes for Na-ion batteries.
Article Chemistry, Physical

Dual-Manipulation on P2-Na0.67Ni0.33Mn0.67O2 Layered Cathode toward Sodium-Ion Full Cell with Record Operating Voltage Beyond 3.5 V

Bo Peng et al.

Summary: A stable P2-Na0.67Ni0.33Mn0.67O2 layered cathode with magnesium doping and hierarchical one-dimensional nanostructure was reported in this study. The material exhibited extraordinary electrochemical performance with a high capacity retention of 90.9% over 1000 cycles.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Physical

Revealing the anionic redox chemistry in O3-type layered oxide cathode for sodium-ion batteries

Yang Yu et al.

Summary: The study demonstrates the anion redox chemistry in O3-type layered oxide cathode materials and proposes a strategy involving ZrO2 coating and Zr4+ doping to enhance the activity, reversibility, and stability of oxygen redox reactions. The integration of Zr4+ doping optimizes lattice structure, reduces diffusion resistance, and increases structural stability, while ZrO2 coating effectively mitigates electrolyte corrosion and inhibits the formation of Na2CO3, indicating potential for regulating oxygen redox activity in cathode materials.

ENERGY STORAGE MATERIALS (2021)

Review Chemistry, Multidisciplinary

Advanced cobalt-free cathode materials for sodium-ion batteries

Shiyong Chu et al.

Summary: This review comprehensively summarizes recent advances in high-performance cobalt-free cathode materials for advanced SIBs, analyzing the conflicts of structural/electrochemical stability with intrinsic insufficiencies of cobalt-free cathode materials, and discussing strategies for constructing stable cobalt-free cathode materials.

CHEMICAL SOCIETY REVIEWS (2021)

Article Chemistry, Inorganic & Nuclear

Biphasic P2/O3-Na2/3Li0.18Mn0.8Fe0.2O2: a structural investigation

Jennifer H. Stansby et al.

Summary: The biphasic P2/O3-Na2/3Li0.18Mn0.8Fe0.2O2 is a promising cathode material for sodium-ion battery applications, benefiting from synergistic enhancement. Neutron and X-ray scattering techniques reveal the structural evolution of the composite electrode and the site preference of Li in biphasic materials. This study highlights the value of utilizing multiple phases to achieve high performance layered cathode materials for sodium battery applications.

DALTON TRANSACTIONS (2021)

Review Chemistry, Multidisciplinary

Sodium transition metal oxides: the preferred cathode choice for future sodium-ion batteries?

Qiannan Liu et al.

Summary: The exploration of next-generation sodium-ion batteries (SIBs) aims to replace lithium-ion batteries and address the depletion of lithium resources. Sodium transition metal oxides are considered promising cathode materials with anionic redox activity. Research on anionic redox in Li-rich transition metal oxides provides insight into high-capacity cathode materials for SIBs, with challenges and strategies discussed. It is expected that this work will provide new perspectives on controlling anionic redox activity and finding novel high-capacity oxide cathode materials for SIBs.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Review Chemistry, Multidisciplinary

Layered Oxide Cathodes Promoted by Structure Modulation Technology for Sodium-Ion Batteries

Xiao Yao et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Nanoscience & Nanotechnology

Elucidating Anionic Redox Chemistry in P3 Layered Cathode for Na-Ion Batteries

Min Jia et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Physical

Surface modification of layer-tunnel hybrid Na0.6MnO2 cathode with open tunnel structure Na2Ti6O13

Yihua Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Chemistry, Physical

Renovating the electrode-electrolyte interphase for layered lithium- & manganese-rich oxides

Feng Wu et al.

ENERGY STORAGE MATERIALS (2020)

Article Materials Science, Multidisciplinary

Al-doped ZnO (AZO) modified LiNi0.8Co0.1Mn0.1O2 and their performance as cathode material for lithium ion batteries

Yulin He et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Review Chemistry, Multidisciplinary

Polyanion-type cathode materials for sodium-ion batteries

Ting Jin et al.

CHEMICAL SOCIETY REVIEWS (2020)

Article Chemistry, Physical

Highly-stable P2-Na0.67MnO2 electrode enabled by lattice tailoring and surface engineering

Wenhua Zuo et al.

ENERGY STORAGE MATERIALS (2020)

Review Nanoscience & Nanotechnology

Comprehensive Review of P2-Type Na2/3Ni1/3Mn2/3O2, a Potential Cathode for Practical Application of Na-Ion Batteries

Jiaolong Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Nanoscience & Nanotechnology

Air-Stable and High-Voltage Layered P3-Type Cathode for Sodium-Ion Full Battery

Ya-Nan Zhou et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Physical

A P2/P3 composite layered cathode for high-performance Na-ion full batteries

Ya-Nan Zhou et al.

NANO ENERGY (2019)

Article Chemistry, Physical

CuO-Coated and Cu2+-doped Co-modified P2-type Na2/3[Ni1/3Mn2/3]O2 for sodium-ion batteries

Rongbin Dang et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2019)

Article Chemistry, Physical

Sodium-Ion Batteries: From Academic Research to Practical Commercialization

Jianqiu Deng et al.

ADVANCED ENERGY MATERIALS (2018)

Review Chemistry, Physical

Electrochemistry and Solid-State Chemistry of NaMeO2 (Me=3d Transition Metals)

Kei Kubota et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Physical

Cu-doped P2-Na0.5Ni0.33Mn0.67O2 encapsulated with MgO as a novel high voltage cathode with enhanced Na-storage properties

Hari Vignesh Ramasamy et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Article Chemistry, Physical

An advanced cathode for Na-ion batteries with high rate and excellent structural stability

Dae Hoe Lee et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)

Article Electrochemistry

Kinetic analysis on LiFePO4 thin films by CV, GITT, and EIS

Kun Tang et al.

ELECTROCHIMICA ACTA (2011)

Article Engineering, Electrical & Electronic

Al-doping effects on structure, electrical and optical properties of c-axis-orientated ZnO:Al thin films

Xu Zi-qiang et al.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2006)

Article Electrochemistry

In situ X-ray diffraction study of P2-Na2/3[Ni1/3Mn2/3]O2

ZH Lu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2001)