相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Enabling LiNi0.88Co0.09Al0.03O2 Cathode Materials with Stable Interface by Modifying Electrolyte with Trimethyl Borate
Zhen-Xue Xiao et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)
An in-depth understanding of the effect of aluminum doping in high-nickel cathodes for lithium-ion batteries
Kai Zhou et al.
ENERGY STORAGE MATERIALS (2021)
Yttrium Surface Gradient Doping for Enhancing Structure and Thermal Stability of High-Ni Layered Oxide as Cathode for Li-Ion Batteries
Yang-Yang Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
Single-Crystal-Layered Ni-Rich Oxide Modified by Phosphate Coating Boosting Interfacial Stability of Li10SnP2S12-Based All-Solid-State Li Batteries
Xiaohua Li et al.
SMALL (2021)
Achieving a bifunctional conformal coating on nickel-rich cathode LiNi0.8Co0.1Mn0.1O2 with half-cyclized polyacrylonitrile
Qian Sun et al.
ELECTROCHIMICA ACTA (2021)
A facile in-situ coating strategy for Ni-rich cathode materials with improved electrochemical performance
Xiang Zhang et al.
ELECTROCHIMICA ACTA (2021)
Advanced Electrode Materials in Lithium Batteries: Retrospect and Prospect
Xin Shen et al.
ENERGY MATERIAL ADVANCES (2021)
Improving the Structure and Cycling Stability of Ni-Rich Layered Cathodes by Dual Modification of Yttrium Doping and Surface Coating
Yan Huang et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Ni-rich LiNi0.8Co0.1Mn0.1O2 coated with Li-ion conductive Li3PO4 as competitive cathodes for high-energy-density lithium ion batteries
Wenheng Zhang et al.
ELECTROCHIMICA ACTA (2020)
Boosting the electrochemical performance of LiNi0.8Co0.15Al0.05O2 cathode materials in-situ modified with Li1.3Al0.3Ti1.7(PO4)3 fast ion conductor for lithium-ion batteries
Yan Nie et al.
ELECTROCHIMICA ACTA (2020)
Understanding the Structure-Performance Relationship of Lithium-Rich Cathode Materials from an Oxygen-Vacancy Perspective
Shao-Lun Cui et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Simultaneous synthesis and synergetic stabilization of Zr-doped and Li6Zr2O7-coated Ni-rich layered cathode for advanced lithium ion batteries
Huiping Yang et al.
ELECTROCHIMICA ACTA (2020)
Chemical coupling constructs amorphous silica modified LiNi0.6Co0.2Mn0.2O2 cathode materials and its electrochemical performances
Yongxiang Chen et al.
JOURNAL OF POWER SOURCES (2019)
Toward a durable solid electrolyte film on the electrodes for Li-ion batteries with high performance
Weimin Zhao et al.
NANO ENERGY (2019)
Evolution mechanism of phase transformation of Li-rich cathode materials in cycling
Shao-Lun Cui et al.
ELECTROCHIMICA ACTA (2019)
Do Increased Ni Contents in LiNixMnyCozO2 (NMC) Electrodes Decrease Structural and Thermal Stability of Li Ion Batteries? A Thorough Look by Consideration of the Li+ Extraction Ratio
Johannes Kasnatscheew et al.
ACS APPLIED ENERGY MATERIALS (2019)
From Surface ZrO2 Coating to Bulk Zr Doping by High Temperature Annealing of Nickel-Rich Lithiated Oxides and Their Enhanced Electrochemical Performance in Lithium Ion Batteries
Florian Schipper et al.
ADVANCED ENERGY MATERIALS (2018)
Designing principle for Ni-rich cathode materials with high energy density for practical applications
Yu Xia et al.
NANO ENERGY (2018)
Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries
Pengfei Yan et al.
NATURE ENERGY (2018)
In situ formed LiNi0.8Co0.15Al0.05O2@Li4SiO4 composite cathode material with high rate capability and long cycling stability for lithium-ion batteries
Jun-chao Zheng et al.
NANO ENERGY (2018)
Evolution of redox couples in Li- and Mn-rich cathode materials and mitigation of voltage fade by reducing oxygen release
Enyuan Hu et al.
NATURE ENERGY (2018)
Improved cycle stability of high-capacity Ni-rich LiNi0.8Mn0lCo0.1O2 at high cut-off voltage by Li2SiO3 coating
Enyue Zhao et al.
JOURNAL OF POWER SOURCES (2017)
Narrowing the Gap between Theoretical and Practical Capacities in Li-Ion Layered Oxide Cathode Materials
Maxwell D. Radin et al.
ADVANCED ENERGY MATERIALS (2017)
Stabilizing the Electrode/Electrolyte Interface of LiNi0.8Co0.15Al0.05O2 through Tailoring Aluminum Distribution in Microspheres as Long-Life, High-Rate, and Safe Cathode for Lithium-Ion Batteries
Peiyu Hou et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Investigating the Kinetic Effect on Structural Evolution of LixNi0.8Co0.15Al0.05O2 Cathode Materials during the Initial Charge/Discharge
Eunmi Jo et al.
CHEMISTRY OF MATERIALS (2017)
A perspective on nickel-rich layered oxide cathodes for lithium-ion batteries
Arumugam Manthiram et al.
ENERGY STORAGE MATERIALS (2017)
Mitigating Voltage Decay of Li-Rich Cathode Material via Increasing Ni Content for Lithium-Ion Batteries
Ji-Lei Shi et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Unraveling the Origin of Instability in Ni-Rich LiNi1-2xCoxMnxO2 (NCM) Cathode Materials
Chaoping Liang et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2016)
Mechanism of the carbonate-based-electrolyte degradation and its effects on the electrochemical performance of Li1+x(NiaCobMn1-a-b)1-xO2 cells
H. -J. Peng et al.
JOURNAL OF POWER SOURCES (2016)
Stabilizing nickel-rich layered cathode materials by a high-charge cation doping strategy: zirconium-doped LiNi0.6Co0.2Mn0.2O2
Florian Schipper et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Direct observation of reversible oxygen anion redox reaction in Li-rich manganese oxide, Li2MnO3, studied by soft X-ray absorption spectroscopy
Masatsugu Oishi et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Study of triallyl phosphate as an electrolyte additive for high voltage lithium-ion cells
J. Xia et al.
JOURNAL OF POWER SOURCES (2015)
An Interfacial Europium Complex on SiO2 Nanoparticles: Reduction-Induced Blue Emission System
Ayumi Ishii et al.
SCIENTIFIC REPORTS (2015)
Effects of heat-treatment atmosphere on electrochemical performances of Ni-rich mixed-metal oxide (LiNi0.80Co0.15Mn0.05O2) as a cathode material for lithium ion battery
Jae-Hyun Shim et al.
ELECTROCHIMICA ACTA (2014)
A high performance layered transition metal oxide cathode material obtained by simultaneous aluminum and iron cationic substitution
Wassima El Mofid et al.
JOURNAL OF POWER SOURCES (2014)
Effect of Residual Lithium Compounds on Layer Ni-Rich Li[Ni0.7Mn0.3]O2
Dae-Hyun Cho et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)
PO43- polyanion-doping for stabilizing Li-rich layered oxides as cathode materials for advanced lithium-ion batteries
H. Z. Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Cobalt-Free Nickel Rich Layered Oxide Cathodes for Lithium-Ion Batteries
Yang-Kook Sun et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Nanostructured high-energy cathode materials for advanced lithium batteries
Yang-Kook Sun et al.
NATURE MATERIALS (2012)
Study of the surface modification of LiNi1/3Co1/3Mn1/3O2 cathode material for lithium ion battery
A. M. A. Hashem et al.
JOURNAL OF POWER SOURCES (2011)
A Novel Cathode Material with a Concentration-Gradient for High-Energy and Safe Lithium-Ion Batteries
Yang-Kook Sun et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
Multi-electron reaction materials for high energy density batteries
Xue-Ping Gao et al.
ENERGY & ENVIRONMENTAL SCIENCE (2010)
Synthesis and characterization of Li[(Ni0.8Co0.1Mn0.1)0.8(Ni0.5Mn0.5)0.2]O2 with the microscale core-shell structure as the positive electrode material for lithium batteries
YK Sun et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2005)
Surface changes on LiNi0.8Co0.2O2 particles during testing of high-power lithium-ion cells
DP Abraham et al.
ELECTROCHEMISTRY COMMUNICATIONS (2002)