相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。HV-KIC property charts of cemented carbides: A comprehensive data collection
Andrei Chychko et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2022)
A Comparison Between Hardness-Scaling and Ball-Indentation Techniques on Predicting Stress/Strain Distribution and Failure Behavior of Resistance Spot Welded Advanced High Strength Steel
Shiping Zhang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2022)
Critical Evaluation of Spherical Indentation Stress-Strain Protocols for the Estimation of the Yield Strengths of Steels
S. Mohan et al.
EXPERIMENTAL MECHANICS (2021)
Uncertainties in the representative indentation stress and strain using spherical nanoindentation
Fei-Ya Huang et al.
APPLIED NANOSCIENCE (2021)
On the effective load during nanoindentation creep testing with continuous stiffness measurement (CSM)
P. Sudharshan Phani et al.
JOURNAL OF MATERIALS RESEARCH (2021)
Profilometry-based indentation plastometry to obtain stress-strain curves from anisotropic superalloy components made by additive manufacturing
Y. T. Tang et al.
MATERIALIA (2021)
Determination of hardness-strength and -flow behavior relationships in bulged aluminum alloys and verification by FE analysis on Rockwell hardness test
Amir Asgharzadeh et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
On the propagation of methodological uncertainties in Depth Sensing Indentation data analysis: A brief and critical review
Simon Roa Diaz
MECHANICS RESEARCH COMMUNICATIONS (2020)
On the correlation between indentation hardness and tensile strength in friction stir processed materials
Farzad Khodabakhshi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
A unified approach for topology optimization with local stress constraints considering various failure criteria: von Mises, Drucker–Prager, Tresca, Mohr–Coulomb, Bresler– Pister and Willam–Warnke
Oliver Giraldo-Londoño et al.
PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2020)
Comparison between stress-strain plots obtained from indentation plastometry, based on residual indent profiles, and from uniaxial testing
J. E. Campbell et al.
ACTA MATERIALIA (2019)
A comparative study on uniaxial tensile property calculation models in spherical indentation tests (SITs)
Tairui Zhang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
A model of hardness and fracture toughness of solids
Efim Mazhnik et al.
JOURNAL OF APPLIED PHYSICS (2019)
Theoretical Conversions of Different Hardness and Tensile Strength for Ductile Materials Based on Stress-Strain Curves
Hui Chen et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
A constitutive model independent analytical method in determining the tensile properties from incremental spherical indentation tests (ISITs)
Tairui Zhang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Hardness - Yield Strength Relation of Al-Mg-Si Alloys
Aluru Praveen Sekhar et al.
7TH NATIONAL CONFERENCE ON PROCESSING AND CHARACTERIZATION OF MATERIALS (NCPCM 2017) (2018)
Indentation Hardness Measurements at Macro-, Micro-, and Nanoscale: A Critical Overview
Esteban Broitman
TRIBOLOGY LETTERS (2017)
Evaluation of strength property variations across 9Cr-1Mo steel weld joints using automated ball indentation (ABI) technique
S. Nagaraju et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Development of strength-hardness relationships in additively manufactured titanium alloys
Jayme S. Keist et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Extraction of plasticity parameters from a single test using a spherical indenter and FEM modelling
J. Dean et al.
MECHANICS OF MATERIALS (2017)
Application of the Improved Inclusion Core Model of the Indentation Process for the Determination of Mechanical Properties of Materials
Boris A. Galanov et al.
CRYSTALS (2017)
A Review of Elastic-Plastic Contact Mechanics
Hamid Ghaednia et al.
APPLIED MECHANICS REVIEWS (2017)
Correlation of spherical nanoindentation stress-strain curves to simple compression stress-strain curves for elastic-plastic isotropic materials using finite element models
Dipen K. Patel et al.
ACTA MATERIALIA (2016)
A unified model for the contact behaviour between equal and dissimilar elastic-plastic spherical bodies
E. Olsson et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2016)
Investigating cube-corner indentation hardness and strength relationship under quasi-static and dynamic testing regimes
Abhi Ghosh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Analysis of Spherical Contact Models for Differential Hardness as a Function of Poisson's Ratio
Giuseppe Pintaude
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2015)
On the relationship between Vickers hardness and yield stress in Al-Zn-Mg-Cu Alloys
M. Tiryakioglu
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Hardness-strength relationships in the aluminum alloy 7010
M. Tiryakioglu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Hardness - strength relationships in fine and ultra-fine grained metals processed through constrained groove pressing
F. Khodabakhshi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Plastic deformation in nanoindentation of tantalum: A new mechanism for prismatic loop formation
T. P. Remington et al.
ACTA MATERIALIA (2014)
An integrated method to determine elastic-plastic parameters by instrumented spherical indentation
Chang Yu et al.
JOURNAL OF MATERIALS RESEARCH (2014)
Experimental Analysis of Indentation Morphologies After Spherical Indentation
Giuseppe Pintaude et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2014)
Correlations between nanoindentation hardness and macroscopic mechanical properties in DP980 steels
M. D. Taylor et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Atomistic simulation of tantalum nanoindentation: Effects of indenter diameter, penetration velocity, and interatomic potentials on defect mechanisms and evolution
C. J. Ruestes et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Correlation between yield stress and hardness of nickel-silicon-boron-based alloys by nanoindentation
Viorel-Aurel Serban et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
On the relationships between hardness and the elastic and plastic properties of isotropic power-law hardening materials
Hongzhi Lan et al.
PHILOSOPHICAL MAGAZINE (2014)
A Comprehensive Elastic-Plastic Single-Asperity Contact Model
A. Megalingam et al.
TRIBOLOGY TRANSACTIONS (2014)
Mechanical tensile properties by spherical macroindentation using an indentation strain-hardening exponent
M. Yetna N'Jock et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2013)
ELASTIC, PLASTIC, CRACKING ASPECTS OF THE HARDNESS OF MATERIALS
R. W. Armstrong et al.
INTERNATIONAL JOURNAL OF MODERN PHYSICS B (2013)
Extended expanding cavity model for measurement of flow properties using instrumented spherical indentation
Seung-Kyun Kang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Estimating Young's modulus and Poisson's ratio by instrumented indentation test
J. E. Zorzi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Elastic-plastic spherical indentation: Deformation regimes, evolution of plasticity, and hardening effect
Z. Song et al.
MECHANICS OF MATERIALS (2013)
Determination of the mechanical properties of amorphous materials through instrumented nanoindentation
M. Rodriguez et al.
ACTA MATERIALIA (2012)
Knoop Hardness-Apparent Yield Stress Relationship in Ceramics
Jeffrey J. Swab et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2012)
Historical origins of indentation hardness testing
S. M. Walley
MATERIALS SCIENCE AND TECHNOLOGY (2012)
Relation between strain hardening exponent of metals and residual profiles of deep spherical indentation
G. Pintaude et al.
MATERIALS SCIENCE AND TECHNOLOGY (2012)
Modeling hardness of polycrystalline materials and bulk metallic glasses
Xing-Qiu Chen et al.
INTERMETALLICS (2011)
Mechanical and anisotropic behaviors of 7075 aluminum alloy sheets
Mohammad Tajally et al.
MATERIALS & DESIGN (2011)
General relationship between strength and hardness
P. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Strength-hardness statistical correlation in API X65 steel
S. H. Hashemi
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Material-dependent representative plastic strain for the prediction of indentation hardness
Nathan A. Branch et al.
ACTA MATERIALIA (2010)
Reassessing spherical indentation: Contact regimes and mechanical property extractions
J. Alcala et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2010)
Finite element and dimensional analysis algorithm for the prediction of mechanical properties of bulk materials and thin films
Sara Aida Rodriguez Pulecio et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Measurement of the local mechanical properties in polycrystalline samples using spherical nanoindentation and orientation imaging microscopy
Siddhartha Pathak et al.
ACTA MATERIALIA (2009)
The contributions of David Tabor to the science of indentation hardness
Ian M. Hutchings
JOURNAL OF MATERIALS RESEARCH (2009)
Correlations Between Indentation Hardness and Yield Stress in Thermoplastic Polymers
T. Koch et al.
STRAIN (2009)
Determination of the effective zero-point and the extraction of spherical nanoindentation stress-strain curves
Surya R. Kalidindi et al.
ACTA MATERIALIA (2008)
Correlation of Yield Strength and Tensile Strength with Hardness for Steels
E. J. Pavlina et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2008)
Analysis of hardness-tensile strength relationships for electroformed nanocrystalline materials
I. Brooks et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Instrumented indentation testing of an epoxy adhesive used in automobile body assembling
Alessandra F. Santos et al.
POLYMER TESTING (2008)
A universal relationship between indentation hardness and flow stress
M. Y. He et al.
JOURNAL OF NUCLEAR MATERIALS (2007)
On the uniqueness of measuring elastoplastic properties from indentation: The indistinguishable mystical materials
Xi Chen et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2007)
An expanding cavity model incorporating strain-hardening and indentation size effects
X-L. Gao
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)
Influence of penetration depth and mechanical properties on contact radius determination for spherical indentation
X. Hernot et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)
Two new expanding cavity models for indentation deformations of elastic strain-hardening materials
XL Gao et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)
Elastic/plastic/cracking indentation behavior of hard materials
RW Armstrong et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2006)
A comparison of flattening and indentation approaches for contact mechanics modeling of single asperity contacts
RL Jackson et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2006)
Microhardness mapping and the hardness-yield strength relationship in high-pressure diecast magnesium alloy AZ91
CH Cáceres et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Inverse scaling functions in nanoindentation with sharp indenters: Determination of material properties
LG Wang et al.
JOURNAL OF MATERIALS RESEARCH (2005)
Unified tensile fracture criterion
ZF Zhang et al.
PHYSICAL REVIEW LETTERS (2005)
The relationship between hardness and yield stress in irradiated austenitic and ferritic steels
JT Busby et al.
JOURNAL OF NUCLEAR MATERIALS (2005)
An analysis of piling-up or sinking-in behaviour of elastic-plastic materials under a sharp indentation
ZH Xu et al.
PHILOSOPHICAL MAGAZINE (2004)
Analysis of the spherical indentation cycle for elastic-perfectly plastic solids
L Kogut et al.
JOURNAL OF MATERIALS RESEARCH (2004)
On macrohardness testing of Al-7 wt.% Si-Mg alloys - II. An evaluation of models for hardness-yield strength relationships
M Tiryakioglu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Indentation analysis of elastic-plastic homogeneous and layered media: Criteria for determining the real material hardness
N Ye et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2003)
Depth-sensing instrumented indentation with dual sharp indenters
N Chollacoop et al.
ACTA MATERIALIA (2003)
Mechanical property evaluation through sharp indentations in elastoplastic and fully plastic contact regimes
M Mata et al.
JOURNAL OF MATERIALS RESEARCH (2003)
Determination of plastic properties of metals by instrumented indentation using different sharp indenters
JL Bucaille et al.
ACTA MATERIALIA (2003)
Computational modeling of the forward and reverse problems in instrumented sharp indentation
M Dao et al.
ACTA MATERIALIA (2001)
Relationship between hardness and tensile properties in various single structured steels
M Umemoto et al.
MATERIALS SCIENCE AND TECHNOLOGY (2001)
Hardness obtained from conical indentations with various cone angles
YT Cheng et al.
JOURNAL OF MATERIALS RESEARCH (2000)
The influence of plastic hardening on surface deformation modes around vickers and spherical indents
J Alcalá et al.
ACTA MATERIALIA (2000)
A controlled scratch test for measuring the elastic property, yield stress and contact stress-strain relationship of a surface
Y Xie et al.
SURFACE & COATINGS TECHNOLOGY (2000)
Determination of elasto-plastic properties by instrumented sharp indentation: Guidelines for property extraction
TA Venkatesh et al.
SCRIPTA MATERIALIA (2000)
分享论文
