4.7 Article

Strengthening and flame retarding effect of bamboo fiber modified by silica aerogel on polylactic acid composites

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Facile fabrication of VO2/SiO2 aerogel composite films with excellent thermochromic properties for smart windows

Jiahong Kang et al.

Summary: In this study, VO2/SiO2 aerogel composite films were fabricated using a mechanical ball-milling method to enhance the solar modulation efficiency and oxidation resistance of VO2 films. The introduction of SiO2 aerogel not only improved the solar modulation efficiency of the composite film, but also effectively slowed down the oxidation of VO2 and improved its oxidation resistance. The universal Rayleigh scattering effect of SiO2 aerogel, combined with the doping effect of Mg2+ ions, further enhanced the thermochromic properties of VO2 films, providing a new approach for the practical application of VO2 films in smart windows.

APPLIED SURFACE SCIENCE (2022)

Article Construction & Building Technology

Natural fibers reinforcement for earthen building components: Mechanical performances of a low quality sheep wool (Valle del Belice sheep)

M. C. M. Parlato et al.

Summary: The paper proposes the use of sheep wool fibers as reinforcement for rammed earth building components and presents experimental results showing that the addition of natural fibers can improve the mechanical properties and enhance environmental sustainability.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Review Materials Science, Composites

Flame retardancy and thermal stability of agricultural residue fiber-reinforced polylactic acid: A Review

Vianney Andrew Yiga et al.

Summary: The use of agricultural fibers and PLA biopolymers in composites has shown advancements in flame retardancy and thermal stability, indicating positive effects on enhancing these properties. However, further research and development is necessary, especially regarding the use of agricultural fibers themselves as flame retardants.

POLYMER COMPOSITES (2021)

Article Engineering, Multidisciplinary

A novel phosphorous-containing polymeric compatibilizer: Effective reinforcement and flame retardancy in glass fiber reinforced polyamide 6 composites

Yuling Xiao et al.

Summary: The phosphorus-containing polymeric compatibilizer (PPC) can enhance the mechanical properties and flame retardant efficiency of glass fiber reinforced polyamide 6 composites.

COMPOSITES PART B-ENGINEERING (2021)

Article Agricultural Engineering

Polypyrrole-modified bamboo fiber/polylactic acid with enhanced mechanical, the antistatic properties and thermal stability

Kaiqiang Zhang et al.

Summary: By oxidatively polymerizing pyrrole on the surface of bamboo fiber to improve the interfacial compatibility with polylactic acid matrix, the use of ferric chloride as an oxidant resulted in significant enhancements in strength and thermal stability, making it a promising method for fabricating antistatic and mechanically superior BF/PLA composites.

INDUSTRIAL CROPS AND PRODUCTS (2021)

Article Construction & Building Technology

Effects of alkali-treated kenaf fiber on environmentally friendly geopolymer-kenaf composites: Black liquid as the regenerated activator of the geopolymer

Na Zhang et al.

Summary: The study successfully improved the compatibility, flexural strength, and toughness of geopolymer-fiber composites by immersing in calcium chloride solution and recycling black liquid as a regenerated activator, achieving a ductile failure mode. This could serve as a basis for the low-cost and eco-friendly preparations of GFCs.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Experimental study on improving the properties of rock wool and glass wool by silica aerogel

Qiuhui Yan et al.

Summary: In this study, silica aerogel/rock wool (SA/RW) and silica aerogel/glass wool (SA/GW) composite plates were prepared and the effects of silica aerogel on the properties of composite plates were investigated. It was found that under certain conditions, silica aerogel can significantly reduce the thermal conductivity, increase compressive strength, and decrease water absorption of the composite plates.

ENERGY AND BUILDINGS (2021)

Article Materials Science, Ceramics

Enhancing the flame retardancy for castor oil-based rigid polyurethane foams via silica aerogel

Guangxu Bo et al.

Summary: Silica aerogel was successfully synthesized via sol-gel method and used to fabricate two types of silica aerogel/castor oil-based flame retardant rigid polyurethane foam (SA/RPUF) composites. Coating SA onto the surface of RPUF with larger cell size significantly improved the physical and flame retardant properties of the composites. This study demonstrates the great potential of RPUFs with larger cell size coated with SA for fire safety as building insulation materials.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2021)

Article Materials Science, Ceramics

Microstructure and Adsorption Properties of MTMS/TEOS Co-precursor Silica Aerogels Dried at Ambient Pressure

Chao Yao et al.

Summary: In this study, a novel MTMS/TEOS co-precursor silica aerogel was prepared and the effects of TEOS content on the performance of the aerogel were investigated. It was found that increasing TEOS content led to changes in gelation time, density, porosity, adsorption rates towards organic matters, and thermal stability of the silica aerogel.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2021)

Article Materials Science, Textiles

Investigation on the Classified Extraction of the Bamboo Fiber and Its Properties

Min Hu et al.

JOURNAL OF NATURAL FIBERS (2020)

Article Chemistry, Multidisciplinary

High-Strength Polylactic Acid (PLA) Biocomposites Reinforced by Epoxy-Modified Pine Fibers

Xianhui Zhao et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Article Chemistry, Physical

One-pot synthesis of polymer-reinforced silica aerogels from high internal phase emulsion templates

Qin Wang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)

Article Chemistry, Multidisciplinary

Reaction-Spun Transparent Silica Aerogel Fibers

Yu Du et al.

ACS NANO (2020)

Article Construction & Building Technology

Optimization of a reinforced geopolymer composite using natural fibers and construction wastes

Guido Silva et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Engineering, Manufacturing

Interfacial compatibilization via in-situ polymerization of epoxidized soybean oil for bamboo fibers reinforced poly(lactic acid) biocomposites

Tingting Chen et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Article Engineering, Manufacturing

Sorption behaviour of bamboo fibre reinforced composites, why do they retain their properties?

Delphine E. C. Depuydt et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Article Engineering, Environmental

Effects of furan-phosphamide derivative on flame retardancy and crystallization behaviors of poly(lactic acid)

Jinhao Sun et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Chemistry, Multidisciplinary

Fire-Retardant and Thermally Insulating Phenolic-Silica Aerogels

Zhi-Long Yu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Article Engineering, Environmental

Layer-by-layer assembled flame-retardant architecture toward high-performance carbon fiber composite

Xiao-Hui Shi et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Article Materials Science, Composites

PLA toughened by bamboo cellulose nanowhiskers: Role of silane compatibilization on the PLA bionanocomposite properties

Shaoping Qian et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2017)

Article Engineering, Manufacturing

The effect of alkaline and silane treatments on mechanical properties and breakage of sisal fibers and poly(lactic acid)/sisal fiber composites

A. Orue et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

Article Agricultural Engineering

Tensile and flexural properties of polylactic acid-based hybrid green composites reinforced by kenaf, bamboo and coir fibers

Rosni Binti Yusoff et al.

INDUSTRIAL CROPS AND PRODUCTS (2016)

Article Engineering, Manufacturing

Effect of diisocyanates as compatibilizer on the properties of ramie/poly(lactic acid) (PLA) composites

Tao Yu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

Article Polymer Science

Development of natural fibre reinforced flame retarded epoxy resin composites

Beata Szolnoki et al.

POLYMER DEGRADATION AND STABILITY (2015)

Article Thermodynamics

Characterization of Phase Change Heat and Mass Transfers in Monoporous Silicon Wick Structures

Steve Q. Cai et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2014)

Article Materials Science, Multidisciplinary

Bamboo fibers for composite applications: a mechanical and morphological investigation

Yan Yu et al.

JOURNAL OF MATERIALS SCIENCE (2014)

Article Engineering, Manufacturing

Multi-scale hybrid biocomposite: Processing and mechanical characterization of bamboo fiber reinforced PLA with microfibrillated cellulose

Kazuya Okubo et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)