4.7 Article

Performance study of fibre reinforced functionally graded concrete pipes

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Effect of Casting Position on Mechanical Performance of Ultra-High Performance Concrete

Sujing Zhao et al.

Summary: This study investigates the influence of different casting positions on the strength and fracture properties of ultra-high performance concrete, showing that mid-cast specimens have higher flexural strength and fracture properties compared to end-cast specimens. The flexural strength of specimens with hooked-end fibers is more likely to be affected by casting position. The residual load-to-peak load ratio is independent of casting position but affected by fiber type and fiber content.

MATERIALS (2022)

Article Engineering, Civil

Real fracture toughness of FRC and FGC: size and boundary effects

A. A. Elakhras et al.

Summary: The present study focuses on the real fracture toughness of MC-FD FRC and MC-FGC, taking into account the effects of size and boundary. By adopting a new technique, a pre-matrix crack was created without cutting the fibers, resulting in accurate fracture toughness measurements. The experimental results suggest that beams with constant span to depth ratios are recommended for studying size effects.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2022)

Article Engineering, Biomedical

The effect of functionally graded materials on bone remodeling around osseointegrated trans-femoral prostheses

Armin Omidvar Ghaziani et al.

Summary: Osseointegrated trans-femoral fixations have been utilized as an alternative to conventional sockets, however, the dissimilarity in mechanical properties has led to issues in bone adaptation. This study proposes fixations made of functionally graded materials (FGMs) and reveals significant advantages over conventionally used Titanium fixtures. The direction of gradation in FGMs plays a crucial role in bone remodeling behavior, with radial FGMs with low-stiffness outer layers showing improved bone adaptation.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Characterization of Aluminum Alloy-Silicon Carbide Functionally Graded Materials Developed by Centrifugal Casting Process

Ioan Milosan et al.

Summary: The continuous development of modern industries necessitates functionally graded materials. This study focused on enhancing the wettability of SiC particles in molten aluminum alloy by coating them with metallic copper, and incorporating them into the alloy mass through centrifugal casting. The metallic coating not only improved the wettability of SiC particles, but also prevented the formation of aluminum carbide when heated above 700 degrees Celsius in conventional aluminum alloys.

APPLIED SCIENCES-BASEL (2021)

Article Engineering, Manufacturing

Additive manufacturing of functionally graded Ti-Al structures by laser-based direct energy deposition

Hendrik Hotz et al.

Summary: Two different grading strategies were investigated for manufacturing functionally graded materials using laser-based direct energy deposition. The chemical composition, microstructure, and mechanical properties in the transition areas were studied using various techniques. Intermetallic phases in both FGMs were found in the transition area between aluminum and titanium alloys, with the embrittlement being less pronounced in the FGM with a step transition.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Article Engineering, Manufacturing

Additive Manufacturing of Polymer-Metal/Ceramic Functionally Graded Composite Components via Multiple Material Laser Powder Bed Fusion

Yuan-Hui Chueh et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2020)

Article Construction & Building Technology

Parametric study of functionally graded concretes incorporating steel fibres and recycled aggregates

Ricardo Chan et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Study on mechanical properties of alkali-resistant basalt fiber reinforced concrete

Min Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Chemistry, Multidisciplinary

Environmental Impacts of Cement Production: A Statistical Analysis

Claudio Durastanti et al.

APPLIED SCIENCES-BASEL (2020)

Review Environmental Sciences

Environmental impacts and decarbonization strategies in the cement and concrete industries

G. Habert et al.

NATURE REVIEWS EARTH & ENVIRONMENT (2020)

Proceedings Paper Materials Science, Multidisciplinary

Assessment of effect of rubber tyre fiber on functionally graded concrete

Sumit Choudhary et al.

MATERIALS TODAY-PROCEEDINGS (2020)

Article Construction & Building Technology

Mechanical properties tests and multiscale numerical simulations for basalt fiber reinforced concrete

Xinjian Sun et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Effects of coarse aggregate and steel fibre contents on mechanical properties of high performance concrete

Lihua Xu et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Exploring the dynamic response and energy dissipation capacity of functionally graded EPS concrete

Zhun Bai et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Review Multidisciplinary Sciences

Functionally graded materials classifications and development trends from industrial point of view

Islam M. El-Galy et al.

SN APPLIED SCIENCES (2019)

Article Construction & Building Technology

Assessing the potential of functionally graded concrete using fibre reinforced and recycled aggregate concrete

Xingzi Liu et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Development of sustainable concrete using recycled coarse aggregate and ground granulated blast furnace slag

R. K. Majhi et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Mechanical performance of steel fibre reinforced rubberised concrete for flexible concrete pavements

Abdulaziz Alsaif et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Experimental investigation of the mechanical properties of basalt fiber-reinforced concrete

Sruthi Jalasutram et al.

STRUCTURAL CONCRETE (2017)

Article Engineering, Civil

Behaviour of high strength concrete reinforced with different types of steel fibres

Emdad K. Z. Balanji et al.

AUSTRALIAN JOURNAL OF STRUCTURAL ENGINEERING (2017)

Article Construction & Building Technology

Mechanical properties of reactive powder concrete containing industrial and waste steel fibres at different ratios under compression

Ahmed Al-Tikrite et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Material properties of basalt fibre reinforced concrete made with recycled earthquake waste

J. F. Dong et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Engineering, Multidisciplinary

Strain hardening ultra-high performance fiber reinforced cementitious composites: Effect of fiber type and concentration

Mehmet Gesoglu et al.

COMPOSITES PART B-ENGINEERING (2016)

Article Construction & Building Technology

Mechanical behaviour of basalt fibre reinforced concrete

John Branston et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Engineering, Civil

Stress intensity factor against fracture toughness in functionally graded geopolymers

A. Nazari et al.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2015)

Article Construction & Building Technology

Mechanical properties and fracture behavior of basalt and glass fiber reinforced concrete: An experimental study

Ahmet B. Kizilkanat et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Construction & Building Technology

Exploring the Potential of the Functionally Graded SCCC for Developing Sustainable Concrete Solutions

Olga Rio et al.

JOURNAL OF ADVANCED CONCRETE TECHNOLOGY (2015)

Article Materials Science, Multidisciplinary

Multi-objective design optimization of functionally graded material for the femoral component of a total knee replacement

Marjan Bahraminasab et al.

MATERIALS & DESIGN (2014)

Article Materials Science, Multidisciplinary

Experimental study on the mechanical properties and microstructure of chopped basalt fibre reinforced concrete

Chaohua Jiang et al.

MATERIALS & DESIGN (2014)

Article Construction & Building Technology

Mechanical properties of steel fibre concrete

Padmanabha Rao Tadepalli et al.

MAGAZINE OF CONCRETE RESEARCH (2013)

Article Engineering, Biomedical

Design of new generation femoral prostheses using functionally graded materials: A finite element analysis

A. A. Oshkour et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2013)

Article Mechanics

Flexural behaviour of amorphous micro-steel fibre-reinforced cement composites

Jong-Pil Won et al.

COMPOSITE STRUCTURES (2012)

Article Construction & Building Technology

Mechanical behaviour and fibre dispersion of hybrid steel fibre reinforced self-compacting concrete

Burcu Akcay et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Article Construction & Building Technology

Cohesive fracture model for functionally graded fiber reinforced concrete

Kyoungsoo Park et al.

CEMENT AND CONCRETE RESEARCH (2010)

Article Construction & Building Technology

Exploring the potential of functionally graded materials concept for the development of fiber cement

C. M. R. Dias et al.

CONSTRUCTION AND BUILDING MATERIALS (2010)

Article Green & Sustainable Science & Technology

Environmental impact of cement production: detail of the different processes and cement plant variability evaluation

C. Chen et al.

JOURNAL OF CLEANER PRODUCTION (2010)

Article Construction & Building Technology

Properties of sustainable concrete containing fly ash, slag and recycled concrete aggregate

M. L. Berndt

CONSTRUCTION AND BUILDING MATERIALS (2009)

Article Engineering, Civil

Sustainability of Concrete Construction

Tarun R. Naik

PRACTICE PERIODICAL ON STRUCTURAL DESIGN AND CONSTRUCTION (2008)

Article Engineering, Civil

Fracture behavior of functionally graded concrete materials for rigid pavements

Jeffery Roesler et al.

TRANSPORTATION RESEARCH RECORD (2007)

Article Engineering, Civil

High-Volume Fly Ash Concrete: Analysis and Application

Mark Reiner et al.

PRACTICE PERIODICAL ON STRUCTURAL DESIGN AND CONSTRUCTION (2006)

Article Materials Science, Multidisciplinary

Bamboo - A functionally graded composite-correlation between microstructure and mechanical strength

AK Ray et al.

JOURNAL OF MATERIALS SCIENCE (2005)

Article Nanoscience & Nanotechnology

Functionally graded materials for sensor and energy applications

E Müller et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)

Article Construction & Building Technology

Compressive stress-strain relationship of steel fibre-reinforced concrete at early age

YN Ding et al.

CEMENT AND CONCRETE RESEARCH (2000)